diff options
author | Martin Pitt <martin.pitt@ubuntu.com> | 2014-12-12 19:54:51 +0200 |
---|---|---|
committer | Martin Pitt <martin.pitt@ubuntu.com> | 2014-12-12 19:54:51 +0200 |
commit | f47781d88ca6bf69d6b1dd0703b2b283482e5c09 (patch) | |
tree | 6a8f1f74e8fba0a2c20d710848d00b0338f6e341 /NEWS | |
parent | 5eef597e931b0428bb984dc2bf0736d032a9198c (diff) | |
download | systemd-f47781d88ca6bf69d6b1dd0703b2b283482e5c09.tar.gz |
Imported Upstream version 218
Diffstat (limited to 'NEWS')
-rw-r--r-- | NEWS | 219 |
1 files changed, 213 insertions, 6 deletions
@@ -1,5 +1,207 @@ systemd System and Service Manager +CHANGES WITH 218: + + * When querying unit file enablement status (for example via + "systemctl is-enabled"), a new state "indirect" is now known + which indicates that a unit might not be enabled itself, but + another unit listed in its Alias= setting might be. + + * Similar to the various existing ConditionXYZ= settings for + units there are now matching AssertXYZ= settings. While + failing conditions cause a unit to be skipped, but its job + to succeed, failing assertions declared like this will cause + a unit start operation and its job to fail. + + * hostnamed now knows a new chassis type "embedded". + + * systemctl gained a new "edit" command. When used on a unit + file this allows extending unit files with .d/ drop-in + configuration snippets or editing the full file (after + copying it from /usr/lib to /etc). This will invoke the + user's editor (as configured with $EDITOR), and reload the + modified configuration after editing. + + * "systemctl status" now shows the suggested enablement state + for a unit, as declared in the (usually vendor-supplied) + system preset files. + + * nss-myhostname will now resolve the single-label host name + "gateway" to the locally configured default IP routing + gateways, ordered by their metrics. This assigns a stable + name to the used gateways, regardless which ones are + currently configured. Note that the name will only be + resolved after all other name sources (if nss-myhostname is + configured properly) and should hence not negatively impact + systems that use the single-label host name "gateway" in + other contexts. + + * systemd-inhibit now allows filtering by mode when listing + inhibitors. + + * Scope and service units gained a new "Delegate" boolean + property, which when set allows processes running inside the + unit to further partition resources. This is primarily + useful for systemd user instances as well as container + managers. + + * journald will now pick up audit messages directly from + the kernel, and log them like any other log message. The + audit fields are split up and fully indexed. This means that + journalctl in many ways is now a (nicer!) alternative to + ausearch, the traditional audit client. Note that this + implements only a minimal audit client, if you want the + special audit modes like reboot-on-log-overflow, please use + the traditional auditd instead, which can be used in + parallel to journald. + + * The ConditionSecurity= unit file option now understands the + special string "audit" to check whether auditing is + available. + + * journalctl gained two new commands --vacuum-size= and + --vacuum-time= to delete old journal files until the + remaining ones take up no more the specified size on disk, + or are not older than the specified time. + + * A new, native PPPoE library has been added to sd-network, + systemd's library of light-weight networking protocols. This + library will be used in a future version of networkd to + enable PPPoE communication without an external pppd daemon. + + * The busctl tool now understands a new "capture" verb that + works similar to "monitor", but writes a packet capture + trace to STDOUT that can be redirected to a file which is + compatible with libcap's capture file format. This can then + be loaded in Wireshark and similar tools to inspect bus + communication. + + * The busctl tool now understands a new "tree" verb that shows + the object trees of a specific service on the bus, or of all + services. + + * The busctl tool now understands a new "introspect" verb that + shows all interfaces and members of objects on the bus, + including their signature and values. This is particularly + useful to get more information about bus objects shown by + the new "busctl tree" command. + + * The busctl tool now understands new verbs "call", + "set-property" and "get-property" for invoking bus method + calls, setting and getting bus object properties in a + friendly way. + + * busctl gained a new --augment-creds= argument that controls + whether the tool shall augment credential information it + gets from the bus with data from /proc, in a possibly + race-ful way. + + * nspawn's --link-journal= switch gained two new values + "try-guest" and "try-host" that work like "guest" and + "host", but do not fail if the host has no persistent + journalling enabled. -j is now equivalent to + --link-journal=try-guest. + + * macvlan network devices created by nspawn will now have + stable MAC addresses. + + * A new SmackProcessLabel= unit setting has been added, which + controls the SMACK security label processes forked off by + the respective unit shall use. + + * If compiled with --enable-xkbcommon, systemd-localed will + verify x11 keymap settings by compiling the given keymap. It + will spew out warnings if the compilation fails. This + requires libxkbcommon to be installed. + + * When a coredump is collected a larger number of metadata + fields is now collected and included in the journal records + created for it. More specifically control group membership, + environment variables, memory maps, working directory, + chroot directory, /proc/$PID/status, and a list of open file + descriptors is now stored in the log entry. + + * The udev hwdb now contains DPI information for mice. For + details see: + + http://who-t.blogspot.de/2014/12/building-a-dpi-database-for-mice.html + + * All systemd programs that read standalone configuration + files in /etc now also support a corresponding series of + .conf.d configuration directories in /etc/, /run/, + /usr/local/lib/, /usr/lib/, and (if configured with + --enable-split-usr) /lib/. In particular, the following + configuration files now have corresponding configuration + directories: system.conf user.conf, logind.conf, + journald.conf, sleep.conf, bootchart.conf, coredump.conf, + resolved.conf, timesyncd.conf, journal-remote.conf, and + journal-upload.conf. Note that distributions should use the + configuration directories in /usr/lib/; the directories in + /etc/ are reserved for the system administrator. + + * systemd-rfkill will no longer take the rfkill device name + into account when storing rfkill state on disk, as the name + might be dynamically assigned and not stable. Instead, the + ID_PATH udev variable combined with the rfkill type (wlan, + bluetooth, ...) is used. + + * A new service systemd-machine-id-commit.service has been + added. When used on systems where /etc is read-only during + boot, and /etc/machine-id is not initialized (but an empty + file), this service will copy the temporary machine ID + created as replacement into /etc after the system is fully + booted up. This is useful for systems that are freshly + installed with a non-initialized machine ID, but should get + a fixed machine ID for subsequent boots. + + * networkd's .netdev files now provide a large set of + configuration parameters for VXLAN devices. Similar, the + bridge port cost parameter is now configurable in .network + files. There's also new support for configuring IP source + routing. networkd .link files gained support for a new + OriginalName= match that is useful to match against the + original interface name the kernel assigned. .network files + may include MTU= and MACAddress= fields for altering the MTU + and MAC address while being connected to a specific network + interface. + + * The LUKS logic gained supported for configuring + UUID-specific key files. There's also new support for naming + LUKS device from the kernel command line, using the new + luks.name= argument. + + * Timer units may now be transiently created via the bus API + (this was previously already available for scope and service + units). In addition it is now possible to create multiple + transient units at the same time with a single bus call. The + "systemd-run" tool has been updated to make use of this for + running commands on a specified time, in at(1)-style. + + * tmpfiles gained support for "t" lines, for assigning + extended attributes to files. Among other uses this may be + used to assign SMACK labels to files. + + Contributions from: Alin Rauta, Alison Chaiken, Andrej + Manduch, Bastien Nocera, Chris Atkinson, Chris Leech, Chris + Mayo, Colin Guthrie, Colin Walters, Cristian Rodríguez, + Daniele Medri, Daniel Mack, Dan Williams, Dan Winship, Dave + Reisner, David Herrmann, Didier Roche, Felipe Sateler, Gavin + Li, Hans de Goede, Harald Hoyer, Iago López Galeiras, Ivan + Shapovalov, Jakub Filak, Jan Janssen, Jan Synacek, Joe + Lawrence, Josh Triplett, Kay Sievers, Lennart Poettering, + Lukas Nykryn, Łukasz Stelmach, Maciej Wereski, Mantas + Mikulėnas, Marcel Holtmann, Martin Pitt, Maurizio Lombardi, + Michael Biebl, Michael Chapman, Michael Marineau, Michal + Schmidt, Michal Sekletar, Olivier Brunel, Patrik Flykt, Peter + Hutterer, Przemyslaw Kedzierski, Rami Rosen, Ray Strode, + Richard Schütz, Richard W.M. Jones, Ronny Chevalier, Ross + Lagerwall, Sean Young, Stanisław Pitucha, Susant Sahani, + Thomas Haller, Thomas Hindoe Paaboel Andersen, Tom Gundersen, + Torstein Husebø, Umut Tezduyar Lindskog, Vicente Olivert + Riera, WaLyong Cho, Wesley Dawson, Zbigniew Jędrzejewski-Szmek + + -- Berlin, 2014-12-10 + CHANGES WITH 217: * journalctl gained the new options -t/--identifier= to match @@ -7,6 +209,11 @@ CHANGES WITH 217: show log timestamps in the UTC timezone. journalctl now also accepts -n/--lines=all to disable line capping in a pager. + * journalctl gained a new switch, --flush, that synchronously + flushes logs from /run/log/journal to /var/log/journal if + persistent storage is enabled. systemd-journal-flush.service + now waits until the operation is complete. + * Services can notify the manager before they start a reload (by sending RELOADING=1) or shutdown (by sending STOPPING=1). This allows the manager to track and show the @@ -46,7 +253,7 @@ CHANGES WITH 217: * A helper binary and a service have been added which can be used to resume from hibernation in the initramfs. A generator will parse the resume= option on the kernel - command-line to trigger resume. + command line to trigger resume. * A user console daemon systemd-consoled has been added. Currently, it is a preview, and will so far open a @@ -76,7 +283,7 @@ CHANGES WITH 217: rotating media anymore, and nobody stepped up to actively maintain this component of systemd it has now been removed. - * Swap units can use Discard= to specify discard options. + * Swap units can use Options= to specify discard options. Discard options specified for swaps in /etc/fstab are now respected. @@ -203,7 +410,7 @@ CHANGES WITH 217: Sahani, Sylvain Plantefève, Thomas Hindoe Paaboel Andersen, Timofey Titovets, Tobias Hunger, Tom Gundersen, Torstein Husebø, Umut Tezduyar Lindskog, WaLyong Cho, Zbigniew - Jędrzejewski-Szmek. + Jędrzejewski-Szmek -- Berlin, 2014-10-28 @@ -1622,7 +1829,7 @@ CHANGES WITH 209: one of the next releases, at the same time that we will declare the APIs stable. - * When the kernel command-line argument "kdbus" is specified, + * When the kernel command line argument "kdbus" is specified, systemd will automatically load the kdbus.ko kernel module. At this stage of development, it is only useful for testing kdbus and should not be used in production. Note: if "--enable-kdbus" @@ -1971,8 +2178,8 @@ CHANGES WITH 207: certain paths from operation. * journald will now automatically flush all messages to disk - as soon as a message of the log priorities CRIT, ALERT or - EMERG is received. + as soon as a message at the log level CRIT, ALERT or EMERG + is received. Contributions from: Andrew Cook, Brandon Philips, Christian Hesse, Christoph Junghans, Colin Walters, Daniel Schaal, |