diff options
author | Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> | 2021-02-23 00:39:08 +0100 |
---|---|---|
committer | Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> | 2021-02-23 00:47:55 +0100 |
commit | 897a25617de1c76dea6d62abd4f8b304971e38a2 (patch) | |
tree | ce9041de7d81dccf94a594a558a0f635efa4de01 /NEWS | |
parent | a5e5e102baf54f113d22a2be5862d8e42f362ddb (diff) | |
download | systemd-897a25617de1c76dea6d62abd4f8b304971e38a2.tar.gz |
NEWS: a few more entries for v248-rc1
I left the stuff related to [NextHop] out. There are still
patches outstanding, and we can add a comprehensive entry once
things reached the final form.
Diffstat (limited to 'NEWS')
-rw-r--r-- | NEWS | 29 |
1 files changed, 22 insertions, 7 deletions
@@ -167,6 +167,10 @@ CHANGES WITH 248: i.e. whether the interface is always upped, always downed, or may be upped/downed by the user using "ip dev". + * The default for the Broadcast= setting in .network files has slightly + changed: the broadcast address will not be configured for wireguard + devices. + * systemd.netdev files gained a [VLAN] Protocol=, IngressQOSMaps=, EgressQOSMaps=, and [MACVLAN] BroadcastMulticastQueueLength= configuration options for VLAN packet handling. @@ -229,17 +233,23 @@ CHANGES WITH 248: * systemd-nspawn gained the ability to configure the firewall using the nftables subsystem (in addition to the existing iptables - support). Similar, systemd-networkd's IPMasquerade= option now + support). Similarly, systemd-networkd's IPMasquerade= option now supports nftables as back-end, too. In both cases NAT on IPv6 is now supported too, in addition to IPv4 (the iptables back-end still is IPv4-only). + "IPMasquerade=yes", which was the same as "IPMasquerade=ipv4" before, + retains its meaning, but has been deprecated. Please switch to either + "ivp4" or "both" (if covering IPv6 is desired). + * systemd-importd will now download .verity and .roothash.p7s files along with the machine image (as exposed via machinectl pull-raw). * systemd-oomd now gained a new DefaultMemoryPressureDurationSec= setting to configure the time a unit's cgroup needs to exceed memory - pressure limits before action will be taken. + pressure limits before action will be taken, and a new + ManagedOOMPreference=none|avoid|omit setting to avoid killing certain + units. systemd-oomd is now considered fully supported (the usual backwards-compatiblity promises apply). Swap is not required for @@ -321,6 +331,10 @@ CHANGES WITH 248: warning is emitted during build. Support is slated to be removed in about a year (when the Debian Bookworm release development starts). + * Systems with the legacy cgroup v1 hierarchy are now marked as + "tainted", to make it clearer that using the legacy hierarchy is not + recommended. + * The main git development branch has been renamed to 'main'. * mmcblk[0-9]boot[0-9] devices will no longer be probed automatically @@ -332,11 +346,12 @@ CHANGES WITH 248: by programs for detecting whether they were forked off by the service manager itself or are a process forked off further down the tree. - * The sd-device API gained three new calls sd_device_get_action() (for - determining the uevent add/remove/change/… action the device object - has been seen for), sd_device_get_seqno() (for determining the uevent - sequence number) and sd_device_new_from_stat_rdev() (for allocating a - new sd_device object from stat() data of a device node). + * The sd-device API gained four new calls: sd_device_get_action() to + determine the uevent add/remove/change/… action the device object has + been seen for, sd_device_get_seqno() to determine the uevent sequence + number, sd_device_new_from_stat_rdev() to allocate a new sd_device + object from stat(2) data of a device node, and sd_device_trigger() to + write to the 'uevent' attribute of a device. * For most tools the --no-legend= switch has been replaced by --legend=no and --legend=yes, to force whether tables are shown with |