docs: say XBOOTLDR instead of just giving the GPT identifier

Fixes #14832.

Also, say "MBR partition table" and not "MBR disk label". "disk label" doesn't
seem to mean anything.

1 files changed, 8 insertions, 8 deletions

diff --git a/docs/BOOT_LOADER_SPECIFICATION.md b/docs/BOOT_LOADER_SPECIFICATION.md
index 13ceaa8482..0c8fb3f176 100644
--- a/docs/BOOT_LOADER_SPECIFICATION.md
+++ b/docs/BOOT_LOADER_SPECIFICATION.md
@@ -55,14 +55,14 @@ functionality. Here's why we think that it is not enough for our uses:
 
 Everything described below is located on a placeholder file system `$BOOT`. The installer program should pick `$BOOT` according to the following rules:
 
-* On disks with MBR disk labels
-  * If the OS is installed on a disk with MBR disk label, and a partition with the MBR type id of 0xEA already exists it should be used as `$BOOT`.
-  * Otherwise, if the OS is installed on a disk with MBR disk label, a new partition with MBR type id of 0xEA shall be created, of a suitable size (let's say 500MB), and it should be used as `$BOOT`.
-* On disks with GPT disk labels
-  * If the OS is installed on a disk with GPT disk label, and a partition with the GPT type GUID of `bc13c2ff-59e6-4262-a352-b275fd6f7172` already exists, it should be used as `$BOOT`.
-  * Otherwise, if the OS is installed on a disk with GPT disk label, and an ESP partition (i.e. with the GPT type UID of `c12a7328-f81f-11d2-ba4b-00a0c93ec93b`) already exists and is large enough (let's say 250MB) and otherwise qualifies, it should be used as `$BOOT`.
-  * Otherwise, if the OS is installed on a disk with GPT disk label, and if the ESP partition already exists but is too small, a new suitably sized (let's say 500MB) partition with GPT type GUID of `bc13c2ff-59e6-4262-a352-b275fd6f7172` shall be created and it should be used as `$BOOT`.
-  * Otherwise, if the OS is installed on a disk with GPT disk label, and no ESP partition exists yet, a new suitably sized (let's say 500MB) ESP should be created and should be used as `$BOOT`.
+* On disks with an MBR partition table:
+  * If the OS is installed on a disk with an MBR partition table, and a partition with the type id of 0xEA already exists it should be used as `$BOOT`.
+  * Otherwise, if the OS is installed on a disk with an MBR partition table, a new partition with type id of 0xEA shall be created, of a suitable size (let's say 500MB), and it should be used as `$BOOT`.
+* On disks with GPT (GUID Partition Table)
+  * If the OS is installed on a disk with GPT, and an Extended Boot Loader Partition or XBOOTLDR partition for short, i.e. a partition with GPT type GUID of `bc13c2ff-59e6-4262-a352-b275fd6f7172`, already exists, it should be used as `$BOOT`.
+  * Otherwise, if the OS is installed on a disk with GPT, and an EFI System Partition or ESP for short, i.e. a partition with GPT type UID of `c12a7328-f81f-11d2-ba4b-00a0c93ec93b`) already exists and is large enough (let's say 250MB) and otherwise qualifies, it should be used as `$BOOT`.
+  * Otherwise, if the OS is installed on a disk with GPT, and if the ESP partition already exists but is too small, a new suitably sized (let's say 500MB) XBOOTLDR partition shall be created and used as `$BOOT`.
+  * Otherwise, if the OS is installed on a disk with GPT, and no ESP partition exists yet, a new suitably sized (let's say 500MB) ESP should be created and used as `$BOOT`.
 
 This placeholder file system shall be determined during _installation time_, and an fstab entry may be created. It should be mounted to either `/boot/` or `/efi/`. Additional locations like `/boot/efi/`, with `/boot/` being a separate file system, might be supported by implementations. This is not recommended because the mounting of `$BOOT` is then dependent on and requires the mounting of the intermediate file system.