summaryrefslogtreecommitdiff
path: root/shell-completion/systemd-zsh-completion.zsh
diff options
context:
space:
mode:
Diffstat (limited to 'shell-completion/systemd-zsh-completion.zsh')
-rw-r--r--shell-completion/systemd-zsh-completion.zsh1052
1 files changed, 0 insertions, 1052 deletions
diff --git a/shell-completion/systemd-zsh-completion.zsh b/shell-completion/systemd-zsh-completion.zsh
deleted file mode 100644
index 411646ea59..0000000000
--- a/shell-completion/systemd-zsh-completion.zsh
+++ /dev/null
@@ -1,1052 +0,0 @@
-#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
-
-_ctls()
-{
- local curcontext="$curcontext" state lstate line
- case "$service" in
- systemctl)
- # -s for aggregated options like -aP
- _arguments -s \
- {-h,--help}'[Show help]' \
- '--version[Show package version]' \
- {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
- \*{-p,--property=}'[Show only properties by specific name]:unit property' \
- {-a,--all}'[Show all units/properties, including dead/empty ones]' \
- '--reverse[Show reverse dependencies]' \
- '--after[Show units ordered after]' \
- '--before[Show units ordered before]' \
- '--failed[Show only failed units]' \
- "--full[Don't ellipsize unit names on output]" \
- '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
- '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
- '--kill-who=[Who to send signal to]:killwho:(main control all)' \
- {-s,--signal=}'[Which signal to send]:signal:_signals' \
- {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
- {-P,--privileged}'[Acquire privileges before execution]' \
- {-q,--quiet}'[Suppress output]' \
- '--no-block[Do not wait until operation finished]' \
- "--no-wall[Don't send wall message before halt/power-off/reboot]" \
- "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
- '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not ask for system passwords]' \
- '--system[Connect to system manager]' \
- '--user[Connect to user service manager]' \
- '--global[Enable/disable unit files globally]' \
- {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
- '--root=[Enable unit files in the specified root directory]:directory:_directories' \
- '--runtime[Enable unit files only temporarily until next reboot]' \
- {-n,--lines=}'[Journal entries to show]:number of entries' \
- {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
- '*::systemctl command:_systemctl_command'
- ;;
- loginctl)
- _arguments -s \
- {-h,--help}'[Show help]' \
- '--version[Show package version]' \
- \*{-p,--property=}'[Show only properties by this name]:unit property' \
- {-a,--all}'[Show all properties, including empty ones]' \
- '--kill-who=[Who to send signal to]:killwho:(main control all)' \
- {-s,--signal=}'[Which signal to send]:signal:_signals' \
- '--no-ask-password[Do not ask for system passwords]' \
- {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
- {-P,--privileged}'[Acquire privileges before execution]' \
- '--no-pager[Do not pipe output into a pager]' \
- '*::loginctl command:_loginctl_command'
- ;;
-
- hostnamectl)
- _arguments -s \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--transient[Only set transient hostname]' \
- '--static[Only set static hostname]' \
- '--pretty[Only set pretty hostname]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
- '*::hostnamectl commands:_hostnamectl_command'
- ;;
- journalctl)
- _arguments -s \
- '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
- '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
- {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
- {-b,--this-boot}'[Show data only from current boot]' \
- {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
- '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
- {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
- {-f,--follow}'[Follow journal]' \
- {-n,--lines=}'[Number of journal entries to show]:integer' \
- '--no-tail[Show all lines, even in follow mode]' \
- {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
- '--full[Show long fields in full]' \
- {-a,--all}'[Show all fields, including long and unprintable]' \
- {-q,--quiet}"[Don't show privilege warning]" \
- '--no-pager[Do not pipe output into a pager]' \
- {-m,--merge}'[Show entries from all available journals]' \
- {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
- '--interval=[Time interval for changing the FSS sealing key]:time interval' \
- '--verify-key=[Specify FSS verification key]:FSS key' \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--new-id128[Generate a new 128 Bit ID]' \
- '--header[Show journal header information]' \
- '--disk-usage[Show total disk usage]' \
- {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
- '--setup-keys[Generate new FSS key pair]' \
- '--verify[Verify journal file consistency]' \
- '--list-catalog[List messages in catalog]' \
- '--update-catalog[Update binary catalog database]' \
- '*::default: _journal_none'
- ;;
- localectl)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- "--no-convert[Don't convert keyboard mappings]" \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
- '*::localectl commands:_localectl_command'
- ;;
- systemd-coredumpctl)
- _arguments \
- {-o,--output=}'[Write output to FILE]:output file:_files' \
- '--no-pager[Do not pipe output into a pager]' \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
-
- ;;
- timedatectl)
- _arguments -s \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
- '*::timedatectl commands:_timedatectl_command'
- ;;
- udevadm)
- _arguments \
- '--debug[Print debug messages to stderr]' \
- '--version[Print version number]' \
- '--help[Print help text]' \
- '*::udevadm commands:_udevadm_command'
- ;;
- systemd-analyze)
- _arguments \
- {-h,--help}'[Show help text.]' \
- '--user[Shows performance data of user sessions instead of the system manager.]' \
- '--order[When generating graph for dot, show only order]' \
- '--require[When generating graph for dot, show only requirement]' \
- '*::systemd-analyze commands:_systemd_analyze_command'
- ;;
- systemd-ask-password)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--icon=[Icon name]' \
- '--timeout=[Timeout in sec]' \
- '--no-tty[Ask question via agent even on TTY]' \
- '--accept-cached[Accept cached passwords]' \
- '--multiple[List multiple passwords if available]'
- ;;
- systemd-cat)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version.]' \
- {-t,--identifier=}'[Set syslog identifier.]' \
- {-p,--priority=}'[Set priority value.]:value:({0..7})' \
- '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
- ':Message'
- ;;
- systemd-cgls)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--no-pager[Do not pipe output into a pager]' \
- {-a,--all}'[Show all groups, including empty]' \
- '-k[Include kernel threads in output]' \
- ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
- ;;
- systemd-cgtop)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Print version and exit]' \
- '(-c -m -i -t)-p[Order by path]' \
- '(-c -p -m -i)-t[Order by number of tasks]' \
- '(-m -p -i -t)-c[Order by CPU load]' \
- '(-c -p -i -t)-m[Order by memory load]' \
- '(-c -m -p -t)-i[Order by IO load]' \
- {-d,--delay=}'[Specify delay]' \
- {-n,--iterations=}'[Run for N iterations before exiting]' \
- {-b,--batch}'[Run in batch mode, accepting no input]' \
- '--depth=[Maximum traversal depth]'
- ;;
- systemd-delta)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
- {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
- ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
- ;;
- systemd-detect-virt)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- {-c,--container}'[Only detect whether we are run in a container]' \
- {-v,--vm}'[Only detect whether we are run in a VM]' \
- {-q,--quiet}"[Don't output anything, just set return value]"
- ;;
- systemd-inhibit)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
- '--who=[A descriptive string who is inhibiting]' \
- '--why=[A descriptive string why is being inhibited]' \
- '--mode=[One of block or delay]' \
- '--list[List active inhibitors]' \
- '*:commands:_systemd_inhibit_command'
- ;;
- systemd-machine-id-setup)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]'
- ;;
- systemd-notify)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--ready[Inform the init system about service start-up completion.]' \
- '--pid=[Inform the init system about the main PID of the daemon]' \
- '--status=[Send a free-form status string for the daemon to the init systemd]' \
- '--booted[Returns 0 if the system was booted up with systemd]' \
- '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
- ;;
- systemd-nspawn)
- _arguments \
- {-h,--help}'[Show this help]' \
- {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
- {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
- {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
- '--uuid=[Set the specified uuid for the container.]' \
- {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
- '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
- '--read-only[Mount the root file system read only for the container.]' \
- '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
- "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
- '-j[Equivalent to --link-journal=guest.]'
- ;;
- systemd-tmpfiles)
- _arguments \
- '--create[Create, set ownership/permissions based on the config files.]' \
- '--clean[Clean up all files and directories with an age parameter configured.]' \
- '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
- '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
- '--help[Prints a short help text and exits.]' \
- '*::files:_files'
- ;;
- systemd-tty-ask-password-agent)
- _arguments \
- {-h,--help}'[Prints a short help text and exits.]' \
- '--version[Prints a short version string and exits.]' \
- '--list[Lists all currently pending system password requests.]' \
- '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
- '--watch[Continuously process password requests.]' \
- '--wall[Forward password requests to wall(1).]' \
- '--plymouth[Ask question with plymouth(8).]' \
- '--console[Ask question on /dev/console.]'
- ;;
- *) _message 'eh?' ;;
- esac
-}
-
-_systemd-nspawn(){
- local -a _caps
- _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
- CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
- CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
- CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
- CAP_SYS_RESOURCE CAP_SYS_BOOT )
- _values -s , 'capabilities' "$_caps[@]"
-}
-
-_systemd_inhibit_command(){
- if (( CURRENT == 1 )); then
- compset -q
- _normal
- else
- local n=${words[(b:2:i)[^-]*]}
- if (( n <= CURRENT )); then
- compset -n $n
- _alternative \
- 'files:file:_files' \
- 'commands:command:_normal' && return 0
- fi
- _default
- fi
-
-}
-
-_systemd_analyze_command(){
- local -a _systemd_analyze_cmds
- # Descriptions taken from systemd-analyze --help.
- _systemd_analyze_cmds=(
- 'time:Print time spent in the kernel before reaching userspace'
- 'blame:Print list of running units ordered by time to init'
- 'critical-chain:Print a tree of the time critical chain of units'
- 'plot:Output SVG graphic showing service initialization'
- 'dot:Dump dependency graph (in dot(1) format)'
- )
-
- if (( CURRENT == 1 )); then
- _describe "options" _systemd_analyze_cmds
- else
- _message "no more options"
- fi
-}
-
-_hosts_or_user_at_host()
-{
- _alternative \
- 'users-hosts:: _user_at_host' \
- 'hosts:: _hosts'
-}
-
-_outputmodes() {
- local -a _output_opts
- _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
- _describe -t output 'output mode' _output_opts || compadd "$@"
-}
-
-
-(( $+functions[_systemctl_command] )) || _systemctl_command()
-{
- local -a _systemctl_cmds
- _systemctl_cmds=(
- "list-units:List units"
- "start:Start (activate) one or more units"
- "stop:Stop (deactivate) one or more units"
- "reload:Reload one or more units"
- "restart:Start or restart one or more units"
- "condrestart:Restart one or more units if active"
- "try-restart:Restart one or more units if active"
- "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
- "force-reload:Reload one or more units if possible, otherwise restart if active"
- "hibernate:Hibernate the system"
- "hybrid-sleep:Hibernate and suspend the system"
- "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
- "isolate:Start one unit and stop all others"
- "kill:Send signal to processes of a unit"
- "is-active:Check whether units are active"
- "is-failed:Check whether units are failed"
- "status:Show runtime status of one or more units"
- "show:Show properties of one or more units/jobs or the manager"
- "reset-failed:Reset failed state for all, one, or more units"
- "load:Load one or more units"
- "list-unit-files:List installed unit files"
- "enable:Enable one or more unit files"
- "disable:Disable one or more unit files"
- "reenable:Reenable one or more unit files"
- "preset:Enable/disable one or more unit files based on preset configuration"
- "help:Show documentation for specified units"
- "list-dependencies:Show unit dependency tree"
- "mask:Mask one or more units"
- "unmask:Unmask one or more units"
- "link:Link one or more units files into the search path"
- "is-enabled:Check whether unit files are enabled"
- "list-jobs:List jobs"
- "cancel:Cancel all, one, or more jobs"
- "dump:Dump server status"
- "snapshot:Create a snapshot"
- "delete:Remove one or more snapshots"
- "show-environment:Dump environment"
- "set-environment:Set one or more environment variables"
- "unset-environment:Unset one or more environment variables"
- "daemon-reload:Reload systemd manager configuration"
- "daemon-reexec:Reexecute systemd manager"
- "default:Enter system default mode"
- "rescue:Enter system rescue mode"
- "emergency:Enter system emergency mode"
- "halt:Shut down and halt the system"
- "suspend:Suspend the system"
- "poweroff:Shut down and power-off the system"
- "reboot:Shut down and reboot the system"
- "kexec:Shut down and reboot the system with kexec"
- "exit:Ask for user instance termination"
- )
-
- if (( CURRENT == 1 )); then
- _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
-
- cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
- # Deal with any aliases
- case $cmd in
- condrestart) cmd="try-restart";;
- force-reload) cmd="reload-or-try-restart";;
- esac
-
- if (( $#cmd )); then
- curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
-
- local update_policy
- zstyle -s ":completion:${curcontext}:" cache-policy update_policy
- if [[ -z "$update_policy" ]]; then
- zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
- fi
-
- _call_function ret _systemctl_$cmd || _message 'no more arguments'
- else
- _message "unknown systemctl command: $words[1]"
- fi
- return ret
- fi
-}
-
-__systemctl()
-{
- local -a _modes
- _modes=("--user" "--system")
- systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
-}
-
-
-# Fills the unit list
-_systemctl_all_units()
-{
- if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
- ! _retrieve_cache SYS_ALL_UNITS;
- then
- _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
- _store_cache SYS_ALL_UNITS _sys_all_units
- fi
-}
-
-# Fills the unit list including all file units
-_systemctl_really_all_units()
-{
- local -a all_unit_files;
- local -a really_all_units;
- if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
- ! _retrieve_cache SYS_REALLY_ALL_UNITS;
- then
- all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
- _systemctl_all_units
- really_all_units=($_sys_all_units $all_unit_files)
- _sys_really_all_units=(${(u)really_all_units})
- _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
- fi
-}
-
-_filter_units_by_property() {
- local property=$1 value=$2 ; shift ; shift
- local -a units ; units=($*)
- local prop unit
- for ((i=1; $i <= ${#units[*]}; i++)); do
- # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
- # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
- # revert to calling 'systemctl show' once for all units, which is way
- # faster
- unit=${units[i]}
- prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
- if [[ "${prop}" = "$property=$value" ]]; then
- echo " ${unit}"
- fi
- done
-}
-
-_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
-_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )}
-_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )}
-_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
-_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
-_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
-
-# Completion functions for ALL_UNITS
-for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_really_all_units
- compadd "$@" -a - _sys_really_all_units
- }
-done
-
-# Completion functions for ENABLED_UNITS
-for fun in disable reenable ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_enabled_units
- _systemctl_disabled_units
- compadd "$@" -a - _sys_enabled_units _sys_disabled_units
- }
-done
-
-# Completion functions for DISABLED_UNITS
-(( $+functions[_systemctl_enable] )) || _systemctl_enable()
-{
- _systemctl_disabled_units
- compadd "$@" -a - _sys_disabled_units
-}
-
-# Completion functions for FAILED_UNITS
-(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
-{
- _systemctl_failed_units
- compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
-}
-
-# Completion functions for STARTABLE_UNITS
-(( $+functions[_systemctl_start] )) || _systemctl_start()
-{
- _systemctl_inactive_units
- compadd "$@" -a - _sys_inactive_units
-}
-
-# Completion functions for STOPPABLE_UNITS
-for fun in stop kill try-restart condrestart ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_active_units
- compadd "$@" - $( _filter_units_by_property CanStop yes \
- ${_sys_active_units[*]} )
- }
-done
-
-# Completion functions for ISOLATABLE_UNITS
-(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
-{
- _systemctl_all_units
- compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
- ${_sys_all_units[*]} )
-}
-
-# Completion functions for RELOADABLE_UNITS
-for fun in reload reload-or-try-restart force-reload ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_active_units
- compadd "$@" - $( _filter_units_by_property CanReload yes \
- ${_sys_active_units[*]} )
- }
-done
-
-# Completion functions for RESTARTABLE_UNITS
-for fun in restart reload-or-restart ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_all_units
- compadd "$@" - $( _filter_units_by_property CanStart yes \
- ${_sys_all_units[*]} | while read line; do \
- [[ "$line" =~ \.device$ ]] || echo " $line"; \
- done )
- }
-done
-
-# Completion functions for MASKED_UNITS
-(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
-{
- _systemctl_masked_units
- compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
-}
-
-# Completion functions for JOBS
-(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
-{
- compadd "$@" - $(__systemctl list-jobs \
- | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
-}
-
-# Completion functions for SNAPSHOTS
-(( $+functions[_systemctl_delete] )) || _systemctl_delete()
-{
- compadd "$@" - $(__systemctl list-units --type snapshot --all \
- | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
-}
-
-# Completion functions for ENVS
-for fun in set-environment unset-environment ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- local fun=$0 ; fun=${fun##_systemctl_}
- local suf
- if [[ "${fun}" = "set-environment" ]]; then
- suf='-S='
- fi
-
- compadd "$@" ${suf} - $(systemctl show-environment \
- | while read line; do echo " ${line%%\=}";done )
- }
-done
-
-(( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
-
-# no systemctl completion for:
-# [STANDALONE]='daemon-reexec daemon-reload default dump
-# emergency exit halt kexec list-jobs list-units
-# list-unit-files poweroff reboot rescue show-environment'
-# [NAME]='snapshot load'
-
-_systemctl_caching_policy()
-{
- local _sysunits
- local -a oldcache
-
- # rebuild if cache is more than a day old
- oldcache=( "$1"(mh+1) )
- (( $#oldcache )) && return 0
-
- _sysunits=($(__systemctl --all | cut -d' ' -f1))
-
- if (( $#_sysunits )); then
- for unit in $_sysunits; do
- [[ "$unit" -nt "$1" ]] && return 0
- done
- fi
-
- return 1
-}
-
-_list_fields() {
- local -a journal_fields
- journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
- ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
- _{P,U,G}ID _COMM _EXE _CMDLINE
- _AUDIT_{SESSION,LOGINUID}
- _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
- _SYSTEMD_USER_UNIT
- _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
- _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
- _KERNEL_{DEVICE,SUBSYSTEM}
- _UDEV_{SYSNAME,DEVNODE,DEVLINK}
- __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
- _describe 'possible fields' journal_fields
-}
-
-_journal_none() {
- local -a _commands _files
- _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
- _alternative : \
- 'files:/dev files:_files -W /dev -P /dev/' \
- "commands:commands:($_commands[@])" \
- 'fields:fields:_list_fields'
-}
-
-_journal_fields() {
- local -a _fields cmd
- cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
- _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
- typeset -U _fields
- _describe 'possible values' _fields
-}
-
-
-_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )}
-_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )}
-_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )}
-
-# Completion functions for SESSIONS
-for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- {
- _loginctl_all_sessions
- compadd "$@" -a - _sys_all_sessions
- }
-done
-
-# Completion functions for USERS
-for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- {
- _loginctl_all_users
- compadd "$@" -a - _sys_all_users
- }
-done
-
-# Completion functions for SEATS
-(( $+functions[_loginctl_seats] )) || _loginctl_seats()
-{
- _loginctl_all_seats
- compadd "$@" -a - _sys_all_seats
-}
-for fun in seat-status show-seat terminate-seat ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- { _loginctl_seats }
-done
-
-# Completion functions for ATTACH
-(( $+functions[_loginctl_attach] )) || _loginctl_attach()
-{
- _loginctl_all_seats
-
- _arguments -w -C -S -s \
- ':seat:_loginctl_seats' \
- '*:device:_files'
-}
-
-# no loginctl completion for:
-# [STANDALONE]='list-sessions list-users list-seats flush-devices'
-
-(( $+functions[_loginctl_command] )) || _loginctl_command()
-{
- local -a _loginctl_cmds
- _loginctl_cmds=(
- "list-sessions:List sessions"
- "session-status:Show session status"
- "show-session:Show properties of one or more sessions"
- "activate:Activate a session"
- "lock-session:Screen lock one or more sessions"
- "unlock-session:Screen unlock one or more sessions"
- "terminate-session:Terminate one or more sessions"
- "kill-session:Send signal to processes of a session"
- "list-users:List users"
- "user-status:Show user status"
- "show-user:Show properties of one or more users"
- "enable-linger:Enable linger state of one or more users"
- "disable-linger:Disable linger state of one or more users"
- "terminate-user:Terminate all sessions of one or more users"
- "kill-user:Send signal to processes of a user"
- "list-seats:List seats"
- "seat-status:Show seat status"
- "show-seat:Show properties of one or more seats"
- "attach:Attach one or more devices to a seat"
- "flush-devices:Flush all device associations"
- "terminate-seat:Terminate all sessions on one or more seats"
- )
-
- if (( CURRENT == 1 )); then
- _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
-
- cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
-
- if (( $#cmd )); then
- curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
-
- _call_function ret _loginctl_$cmd || _message 'no more arguments'
- else
- _message "unknown loginctl command: $words[1]"
- fi
- return ret
- fi
-}
-
-_hostnamectl_command() {
- local -a _hostnamectl_cmds
- _hostnamectl_cmds=(
- "status:Show current hostname settings"
- "set-hostname:Set system hostname"
- "set-icon-name:Set icon name for host"
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
- cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
- _message "$msg"
- else
- _message "unknown hostnamectl command: $words[1]"
- fi
- fi
-}
-
-_localectl_set-locale() {
- local -a _confs _locales
- local expl suf
- _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
- _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
- if [[ -prefix 1 *\= ]]; then
- local conf=${PREFIX%%\=*}
- compset -P1 '*='
- _wanted locales expl "locales configs" \
- _combination localeconfs confs=$conf locales "$@" -
- else
- compadd -S '=' $_confs
- fi
-}
-
-_localectl_set-keymap() {
- local -a _keymaps
- _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
- if (( CURRENT <= 3 )); then
- _describe keymaps _keymaps
- else
- _message "no more options"
- fi
-}
-
-_localectl_set-x11-keymap() {
- if (( $+commands[pkg-config] )); then
- local -a _file _layout _model _variant _options
- local _xorg_lst
- _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
- _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
- _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
- _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
- _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
- _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
- #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
- #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
- #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
- #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
-
- case $CURRENT in
- 2) _describe layouts _layout ;;
- 3) _describe models _model;;
- 4) _describe variants _variant;;
- 5) _describe options _options;;
- *) _message "no more options"
- esac
- fi
-}
-
-
-_localectl_command() {
- local -a _localectl_cmds
- _localectl_cmds=(
- 'status:Show current locale settings'
- 'set-locale:Set system locale'
- 'list-locales:Show known locales'
- 'set-keymap:Set virtual console keyboard mapping'
- 'list-keymaps:Show known virtual console keyboard mappings'
- 'set-x11-keymap:Set X11 keyboard mapping'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'localectl command' _localectl_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $+functions[_localectl_$cmd] )); then
- _localectl_$cmd
- else
- _message "no more options"
- fi
- fi
-}
-
-_timedatectl_set-timezone(){
- local -a _timezones
- _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
- compadd "$_timezones[@]"
-}
-
-_timedatectl_set-time(){
- _message "YYYY-MM-DD HH:MM:SS"
-}
-
-_timedatectl_set-local-rtc(){
- local -a _options
- _options=(
- '0:Maintain RTC in universal time'
- '1:Maintain RTC in local time'
- )
- _describe options _options
-}
-
-_timedatectl_set-ntp(){
- local -a _options
- _options=(
- '0:Disable NTP based network time configuration'
- '1:Enable NTP based network time configuration'
- )
- _describe options _options
-}
-
-_timedatectl_command(){
- local -a _timedatectl_cmds
- _timedatectl_cmds=(
- 'status:Show current time settings'
- 'set-time:Set system time'
- 'set-timezone:Set system timezone'
- 'list-timezones:Show known timezones'
- 'set-local-rtc:Control whether RTC is in local time'
- 'set-ntp:Control whether NTP is enabled'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'timedatectl command' _timedatectl_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- if (( $+functions[_timedatectl_$cmd] )); then
- _timedatectl_$cmd
- else
- _message "no more options"
- fi
- else
- _message "unknown timedatectl command: $words[1]"
- fi
- fi
-}
-_systemd-coredumpctl_command(){
- local -a _systemd_coredumpctl_cmds
- _systemd_coredumpctl_cmds=(
- 'list:List available coredumps'
- 'dump:Print coredump to std'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
- else
- local curcontext="$curcontext"
- local -a _dumps
- cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
- _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
- if [[ -n "$_dumps" ]]; then
- _describe -t pids 'coredumps' _dumps
- else
- _message "no coredumps"
- fi
- else
- _message "no more options"
- fi
-
- fi
-
-}
-
-_udevadm_info(){
- _arguments \
- '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
- '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
- '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
- '--root[Print absolute paths in name or symlink query.]' \
- '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
- '--export[Print output as key/value pairs.]' \
- '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
- '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
- '--export-db[Export the content of the udev database.]' \
- '--cleanup-db[Cleanup the udev database.]'
-}
-
-_udevadm_trigger(){
- _arguments \
- '--verbose[Print the list of devices which will be triggered.]' \
- '--dry-run[Do not actually trigger the event.]' \
- '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
- '--action=[Type of event to be triggered.]:actions:(add change remove)' \
- '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
- '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
- '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
- '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
- '--property-match=[Trigger events for devices with a matching property value.]' \
- '--tag-match=property[Trigger events for devices with a matching tag.]' \
- '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
- '--parent-match=[Trigger events for all children of a given device.]'
-}
-
-_udevadm_settle(){
- _arguments \
- '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
- '--seq-start=[Wait only for events after the given sequence number.]' \
- '--seq-end=[Wait only for events before the given sequence number.]' \
- '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
- '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
- '--help[Print help text.]'
-}
-
-_udevadm_control(){
- _arguments \
- '--exit[Signal and wait for systemd-udevd to exit.]' \
- '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
- '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
- '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
- '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
- '--property=[Set a global property for all events.]' \
- '--children-max=[Set the maximum number of events.]' \
- '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
- '--help[Print help text.]'
-}
-
-_udevadm_monitor(){
- _arguments \
- '--kernel[Print the kernel uevents.]' \
- '--udev[Print the udev event after the rule processing.]' \
- '--property[Also print the properties of the event.]' \
- '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
- '--tag-match=[Filter events by property.]' \
- '--help[Print help text.]'
-}
-
-_udevadm_test(){
- _arguments \
- '--action=[The action string.]:actions:(add change remove)' \
- '--subsystem=[The subsystem string.]' \
- '--help[Print help text.]' \
- '*::devpath:_files -P /sys/ -W /sys'
-}
-
-_udevadm_test-builtin(){
- if (( CURRENT == 2 )); then
- _arguments \
- '--help[Print help text]' \
- '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
- elif (( CURRENT == 3 )); then
- _arguments \
- '--help[Print help text]' \
- '*::syspath:_files -P /sys -W /sys'
- else
- _arguments \
- '--help[Print help text]'
- fi
-}
-
-_udevadm_mounts(){
- local dev_tmp dpath_tmp mp_tmp mline
-
- tmp=( "${(@f)$(< /etc/mtab)}" )
- dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
- mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
-
- local MATCH
- mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
- dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
- dev_tmp=( "${(@q)dev_tmp:#/*}" )
-
- _alternative \
- 'device-paths: device path:compadd -a dpath_tmp' \
- 'directories:mount point:compadd -a mp_tmp'
-}
-
-
-_udevadm_command(){
- local -a _udevadm_cmds
- _udevadm_cmds=(
- 'info:query sysfs or the udev database'
- 'trigger:request events from the kernel'
- 'settle:wait for the event queue to finish'
- 'control:control the udev daemon'
- 'monitor:listen to kernel and udev events'
- 'test:test an event run'
- 'test-builtin:test a built-in command'
- )
-
- if ((CURRENT == 1)); then
- _describe -t commands 'udevadm commands' _udevadm_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
- if (($#cmd)); then
- if (( $+functions[_udevadm_$cmd] )); then
- _udevadm_$cmd
- else
- _message "no options for $cmd"
- fi
- else
- _message "no more options"
- fi
- fi
-}
-
-_ctls "$@"
-
-#vim: set ft=zsh sw=4 ts=4 et
View Lorry Controller Status