systemd sd_notify 3 sd_notify sd_notifyf sd_pid_notify sd_pid_notifyf sd_pid_notify_with_fds sd_notify_barrier Notify service manager about start-up completion and other service status changes #include <systemd/sd-daemon.h> int sd_notify int unset_environment const char *state int sd_notifyf int unset_environment const char *format … int sd_pid_notify pid_t pid int unset_environment const char *state int sd_pid_notifyf pid_t pid int unset_environment const char *format … int sd_pid_notify_with_fds pid_t pid int unset_environment const char *state const int *fds unsigned n_fds int sd_notify_barrier int unset_environment uint64_t timeout sd_notify() may be called by a service to notify the service manager about state changes. It can be used to send arbitrary information, encoded in an environment-block-like string. Most importantly, it can be used for start-up completion notification. If the unset_environment parameter is non-zero, sd_notify() will unset the $NOTIFY_SOCKET environment variable before returning (regardless of whether the function call itself succeeded or not). Further calls to sd_notify() will then fail, but the variable is no longer inherited by child processes. The state parameter should contain a newline-separated list of variable assignments, similar in style to an environment block. A trailing newline is implied if none is specified. The string may contain any kind of variable assignments, but the following shall be considered well-known: READY=1 Tells the service manager that service startup is finished, or the service finished re-loading its configuration. This is only used by systemd if the service definition file has Type=notify or Type=notify-reload set. Since there is little value in signaling non-readiness, the only value services should send is READY=1 (i.e. READY=0 is not defined). RELOADING=1 Tells the service manager that the service is beginning to reload its configuration. This is useful to allow the service manager to track the service's internal state, and present it to the user. Note that a service that sends this notification must also send a READY=1 notification when it completed reloading its configuration. Reloads the service manager is notified about with this mechanisms are propagated in the same way as they are when originally initiated through the service manager. This message is particularly relevant for Type=notify-reload services, to inform the service manager that the request to reload the service has been received and is now being processed. MONOTONIC_USEC=… A field carrying the monotonic timestamp (as per CLOCK_MONOTONIC) formatted in decimal in µs, when the notification message was generated by the client. This is typically used in combination with RELOADING=1, to allow the service manager to properly synchronize reload cycles. See systemd.service5 for details, specifically Type=notify-reload. STOPPING=1 Tells the service manager that the service is beginning its shutdown. This is useful to allow the service manager to track the service's internal state, and present it to the user. STATUS=… Passes a single-line UTF-8 status string back to the service manager that describes the service state. This is free-form and can be used for various purposes: general state feedback, fsck-like programs could pass completion percentages and failing programs could pass a human-readable error message. Example: STATUS=Completed 66% of file system check… NOTIFYACCESS=… Reset the access to the service status notification socket during runtime, overriding NotifyAccess= setting in the service unit file. See systemd.service5 for details, specifically NotifyAccess= for a list of accepted values. ERRNO=… If a service fails, the errno-style error code, formatted as string. Example: ERRNO=2 for ENOENT. BUSERROR=… If a service fails, the D-Bus error-style error code. Example: BUSERROR=org.freedesktop.DBus.Error.TimedOut EXIT_STATUS=… If a service exits, the return value of its main() function. MAINPID=… The main process ID (PID) of the service, in case the service manager did not fork off the process itself. Example: MAINPID=4711 WATCHDOG=1 Tells the service manager to update the watchdog timestamp. This is the keep-alive ping that services need to issue in regular intervals if WatchdogSec= is enabled for it. See systemd.service5 for information how to enable this functionality and sd_watchdog_enabled3 for the details of how the service can check whether the watchdog is enabled. WATCHDOG=trigger Tells the service manager that the service detected an internal error that should be handled by the configured watchdog options. This will trigger the same behaviour as if WatchdogSec= is enabled and the service did not send WATCHDOG=1 in time. Note that WatchdogSec= does not need to be enabled for WATCHDOG=trigger to trigger the watchdog action. See systemd.service5 for information about the watchdog behavior. WATCHDOG_USEC=… Reset watchdog_usec value during runtime. Notice that this is not available when using sd_event_set_watchdog() or sd_watchdog_enabled(). Example : WATCHDOG_USEC=20000000 EXTEND_TIMEOUT_USEC=… Tells the service manager to extend the startup, runtime or shutdown service timeout corresponding the current state. The value specified is a time in microseconds during which the service must send a new message. A service timeout will occur if the message isn't received, but only if the runtime of the current state is beyond the original maximum times of TimeoutStartSec=, RuntimeMaxSec=, and TimeoutStopSec=. See systemd.service5 for effects on the service timeouts. FDSTORE=1 Stores additional file descriptors in the service manager. File descriptors sent this way will be maintained per-service by the service manager and will later be handed back using the usual file descriptor passing logic at the next invocation of the service (e.g. when it is restarted), see sd_listen_fds3. This is useful for implementing services that can restart after an explicit request or a crash without losing state. Any open sockets and other file descriptors which should not be closed during the restart may be stored this way. Application state can either be serialized to a file in /run/, or better, stored in a memfd_create2 memory file descriptor. Note that the service manager will accept messages for a service only if its FileDescriptorStoreMax= setting is non-zero (defaults to zero, see systemd.service5). If FDPOLL=0 is not set and the file descriptors sent are pollable (see epoll_ctl2), then any EPOLLHUP or EPOLLERR event seen on them will result in their automatic removal from the store. Multiple arrays of file descriptors may be sent in separate messages, in which case the arrays are combined. Note that the service manager removes duplicate (pointing to the same object) file descriptors before passing them to the service. When a service is stopped, its file descriptor store is discarded and all file descriptors in it are closed. Use sd_pid_notify_with_fds() to send messages with FDSTORE=1, see below. The service manager will set the $FDSTORE environment variable for services that have the file descriptor store enabled. FDSTOREREMOVE=1 Removes file descriptors from the file descriptor store. This field needs to be combined with FDNAME= to specify the name of the file descriptors to remove. FDNAME=… When used in combination with FDSTORE=1, specifies a name for the submitted file descriptors. When used with FDSTOREREMOVE=1, specifies the name for the file descriptors to remove. This name is passed to the service during activation, and may be queried using sd_listen_fds_with_names3. File descriptors submitted without this field set, will implicitly get the name stored assigned. Note that, if multiple file descriptors are submitted at once, the specified name will be assigned to all of them. In order to assign different names to submitted file descriptors, submit them in separate invocations of sd_pid_notify_with_fds(). The name may consist of arbitrary ASCII characters except control characters or :. It may not be longer than 255 characters. If a submitted name does not follow these restrictions, it is ignored. FDPOLL=0 When used in combination with FDSTORE=1, disables polling of the stored file descriptors regardless of whether or not they are pollable. As this option disables automatic cleanup of the stored file descriptors on EPOLLERR and EPOLLHUP, care must be taken to ensure proper manual cleanup. Use of this option is not generally recommended except for when automatic cleanup has unwanted behavior such as prematurely discarding file descriptors from the store. BARRIER=1 Tells the service manager that the client is explicitly requesting synchronization by means of closing the file descriptor sent with this command. The service manager guarantees that the processing of a BARRIER=1 command will only happen after all previous notification messages sent before this command have been processed. Hence, this command accompanied with a single file descriptor can be used to synchronize against reception of all previous status messages. Note that this command cannot be mixed with other notifications, and has to be sent in a separate message to the service manager, otherwise all assignments will be ignored. Note that sending 0 or more than 1 file descriptor with this command is a violation of the protocol. It is recommended to prefix variable names that are not listed above with X_ to avoid namespace clashes. Note that systemd will accept status data sent from a service only if the NotifyAccess= option is correctly set in the service definition file. See systemd.service5 for details. Note that sd_notify() notifications may be attributed to units correctly only if either the sending process is still around at the time PID 1 processes the message, or if the sending process is explicitly runtime-tracked by the service manager. The latter is the case if the service manager originally forked off the process, i.e. on all processes that match NotifyAccess=main or NotifyAccess=exec. Conversely, if an auxiliary process of the unit sends an sd_notify() message and immediately exits, the service manager might not be able to properly attribute the message to the unit, and thus will ignore it, even if NotifyAccess=all is set for it. Hence, to eliminate all race conditions involving lookup of the client's unit and attribution of notifications to units correctly, sd_notify_barrier() may be used. This call acts as a synchronization point and ensures all notifications sent before this call have been picked up by the service manager when it returns successfully. Use of sd_notify_barrier() is needed for clients which are not invoked by the service manager, otherwise this synchronization mechanism is unnecessary for attribution of notifications to the unit. sd_notifyf() is similar to sd_notify() but takes a printf()-like format string plus arguments. sd_pid_notify() and sd_pid_notifyf() are similar to sd_notify() and sd_notifyf() but take a process ID (PID) to use as originating PID for the message as first argument. This is useful to send notification messages on behalf of other processes, provided the appropriate privileges are available. If the PID argument is specified as 0, the process ID of the calling process is used, in which case the calls are fully equivalent to sd_notify() and sd_notifyf(). sd_pid_notify_with_fds() is similar to sd_pid_notify() but takes an additional array of file descriptors. These file descriptors are sent along the notification message to the service manager. This is particularly useful for sending FDSTORE=1 messages, as described above. The additional arguments are a pointer to the file descriptor array plus the number of file descriptors in the array. If the number of file descriptors is passed as 0, the call is fully equivalent to sd_pid_notify(), i.e. no file descriptors are passed. Note that file descriptors sent to the service manager on a message without FDSTORE=1 are immediately closed on reception. sd_notify_barrier() allows the caller to synchronize against reception of previously sent notification messages and uses the BARRIER=1 command. It takes a relative timeout value in microseconds which is passed to ppoll2 . A value of UINT64_MAX is interpreted as infinite timeout. On failure, these calls return a negative errno-style error code. If $NOTIFY_SOCKET was not set and hence no status message could be sent, 0 is returned. If the status was sent, these functions return a positive value. In order to support both service managers that implement this scheme and those which do not, it is generally recommended to ignore the return value of this call. Note that the return value simply indicates whether the notification message was enqueued properly, it does not reflect whether the message could be processed successfully. Specifically, no error is returned when a file descriptor is attempted to be stored using FDSTORE=1 but the service is not actually configured to permit storing of file descriptors (see above). These functions send a single datagram with the state string as payload to the socket referenced in the $NOTIFY_SOCKET environment variable. If the first character of $NOTIFY_SOCKET is / or @, the string is understood as an AF_UNIX or Linux abstract namespace socket (respectively), and in both cases the datagram is accompanied by the process credentials of the sending service, using SCM_CREDENTIALS. If the string starts with vsock: then the string is understood as an AF_VSOCK address, which is useful for hypervisors/VMMs or other processes on the host to receive a notification when a virtual machine has finished booting. Note that in case the hypervisor does not support SOCK_DGRAM over AF_VSOCK, SOCK_SEQPACKET will be used instead. The address should be in the form: vsock:CID:PORT. Note that unlike other uses of vsock, the CID is mandatory and cannot be VMADDR_CID_ANY. Note that PID1 will send the VSOCK packets from a privileged port (i.e.: lower than 1024), as an attempt to address concerns that unprivileged processes in the guest might try to send malicious notifications to the host, driving it to make destructive decisions based on them. $NOTIFY_SOCKET Set by the service manager for supervised processes for status and start-up completion notification. This environment variable specifies the socket sd_notify() talks to. See above for details. When a service finished starting up, it might issue the following call to notify the service manager: sd_notify(0, "READY=1"); A service could send the following after completing initialization: sd_notifyf(0, "READY=1\n" "STATUS=Processing requests…\n" "MAINPID=%lu", (unsigned long) getpid()); A service could send the following shortly before exiting, on failure: sd_notifyf(0, "STATUS=Failed to start up: %s\n" "ERRNO=%i", strerror_r(errnum, (char[1024]){}, 1024), errnum); To store an open file descriptor in the service manager, in order to continue operation after a service restart without losing state, use FDSTORE=1: sd_pid_notify_with_fds(0, 0, "FDSTORE=1\nFDNAME=foobar", &fd, 1); When the client sending the notifications is not spawned by the service manager, it may exit too quickly and the service manager may fail to attribute them correctly to the unit. To prevent such races, use sd_notify_barrier() to synchronize against reception of all notifications sent before this call is made. sd_notify(0, "READY=1"); /* set timeout to 5 seconds */ sd_notify_barrier(0, 5 * 1000000); systemd1, sd-daemon3, sd_listen_fds3, sd_listen_fds_with_names3, sd_watchdog_enabled3, daemon7, systemd.service5