# @(#) Makefile 1.23 97/03/21 19:27:20 what: @echo @echo "Usage: edit the REAL_DAEMON_DIR definition in the Makefile then:" @echo @echo " make sys-type" @echo @echo "If you are in a hurry you can try instead:" @echo @echo " make REAL_DAEMON_DIR=/foo/bar sys-type" @echo @echo "And for a version with language extensions enabled:" @echo @echo " make REAL_DAEMON_DIR=/foo/bar STYLE=-DPROCESS_OPTIONS sys-type" @echo @echo "This Makefile knows about the following sys-types:" @echo @echo " generic (most bsd-ish systems with sys5 compatibility)" @echo " 386bsd aix alpha apollo bsdos convex-ultranet dell-gcc dgux dgux543" @echo " dynix epix esix freebsd hpux irix4 irix5 irix6 isc iunix" @echo " linux machten mips(untested) ncrsvr4 netbsd next osf power_unix_211" @echo " ptx-2.x ptx-generic pyramid sco sco-nis sco-od2 sco-os5 sinix sunos4" @echo " sunos40 sunos5 sysv4 tandem ultrix unicos7 unicos8 unixware1 unixware2" @echo " uts215 uxp" @echo @echo "If none of these match your environment, edit the system" @echo "dependencies sections in the Makefile and do a 'make other'." @echo ####################################################### # Choice between easy and advanced installation recipe. # # Advanced installation: vendor-provided daemons are left alone, and the # inetd configuration file is edited. In this case, the REAL_DAEMON_DIR # macro should reflect the actual directory with (most of) your # vendor-provided network daemons. These names can be found in the # inetd.conf file. Usually, the telnet, ftp and finger daemons all live # in the same directory. # # Uncomment the appropriate line if you are going to edit inetd.conf. # # Ultrix 4.x SunOS 4.x ConvexOS 10.x Dynix/ptx #REAL_DAEMON_DIR=/usr/etc # # SysV.4 Solaris 2.x OSF AIX #REAL_DAEMON_DIR=/usr/sbin # # BSD 4.4 #REAL_DAEMON_DIR=/usr/libexec # # HP-UX SCO Unicos #REAL_DAEMON_DIR=/etc # Easy installation: vendor-provided network daemons are moved to "some # other" directory, and the tcpd wrapper fills in the "holes". For this # mode of operation, the REAL_DAEMON_DIR macro should be set to the "some # other" directory. The "..." is here for historical reasons only; you # should probably use some other name. # # Uncomment the appropriate line if you are going to move your daemons. # # Ultrix 4.x SunOS 4.x ConvexOS 10.x Dynix/ptx #REAL_DAEMON_DIR=/usr/etc/... # # SysV.4 Solaris 2.x OSF AIX #REAL_DAEMON_DIR=/usr/sbin/... # # BSD 4.4 #REAL_DAEMON_DIR=/usr/libexec/... # # HP-UX SCO Unicos #REAL_DAEMON_DIR=/etc/... # End of mandatory section ########################## ########################################## # Ready-to-use system-dependent templates. # # Ready-to-use templates are available for many systems (see the "echo" # commands at the start of this Makefile). The templates take care of # all system dependencies: after editing the REAL_DAEMON_DIR definition # above, do a "make sunos4" (or whatever system type is appropriate). # # If your system is not listed (or something that comes close enough), you # have to edit the system dependencies section below and do a "make other". # # Send templates for other UNIX versions to wietse@wzv.win.tue.nl. # This is good for many BSD+SYSV hybrids with NIS (formerly YP). generic aix osf alpha dynix: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= all # Ditto, with vsyslog sunos4: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP VSYSLOG= TLI= all # Generic with resolver library. generic-resolver: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lresolv RANLIB=ranlib ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= all # The NeXT loader needs "-m" or it barfs on redefined library functions. next: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-m RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP=-DNETGROUP TLI= all # SunOS for the 386 was frozen at release 4.0.x. sunos40: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ="setenv.o strcasecmp.o" \ NETGROUP=-DNETGROUP VSYSLOG= TLI= all # Ultrix is like aix, next, etc., but has miscd and setenv(). ultrix: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ= \ NETGROUP=-DNETGROUP TLI= all miscd # This works on EP/IX 1.4.3 and will likely work on Mips (reggers@julian.uwo.ca) epix: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP=-DNETGROUP TLI= SYSTYPE="-systype bsd43" all # Freebsd and linux by default have no NIS. 386bsd netbsd bsdos: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ= NETGROUP= TLI= \ EXTRA_CFLAGS=-DSYS_ERRLIST_DEFINED VSYSLOG= all freebsd: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ= NETGROUP= TLI= \ EXTRA_CFLAGS=-DSYS_ERRLIST_DEFINED VSYSLOG= all linux: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP= TLI= EXTRA_CFLAGS="-DBROKEN_SO_LINGER" all # This is good for many SYSV+BSD hybrids with NIS, probably also for HP-UX 7.x. hpux hpux8 hpux9 hpux10: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=echo ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= all # ConvexOS-10.x with UltraNet support (ukkonen@csc.fi). convex-ultranet: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lulsock RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP=-DNETGROUP TLI= all # Generic support for the Dynix/PTX version of TLI. ptx-generic: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -linet -lnsl" RANLIB=echo ARFLAGS=rv \ AUX_OBJ="setenv.o strcasecmp.o ptx.o" NETGROUP= TLI=-DPTX all # With UDP support optimized for PTX 2.x (timw@sequent.com). ptx-2.x: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -linet -lnsl" RANLIB=echo ARFLAGS=rv \ AUX_OBJ="setenv.o strcasecmp.o tli-sequent.o" NETGROUP= \ TLI=-DTLI_SEQUENT all # IRIX 4.0.x has a special ar(1) flag. irix4: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lc -lsun" RANLIB=echo ARFLAGS=rvs AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= all # IRIX 5.2 is SYSV4 with several broken things (such as -lsocket -lnsl). irix5: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lsun RANLIB=echo ARFLAGS=rv VSYSLOG= \ NETGROUP=-DNETGROUP AUX_OBJ=setenv.o TLI= all # IRIX 6.2 (tucker@math.unc.edu). Must find a better value than 200000. irix6: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=echo ARFLAGS=rv VSYSLOG= \ NETGROUP=-DNETGROUP EXTRA_CFLAGS="-DBSD=200000" TLI= all # SunOS 5.x is another SYSV4 variant. sunos5: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl" RANLIB=echo ARFLAGS=rv VSYSLOG= \ NETGROUP=-DNETGROUP AUX_OBJ=setenv.o TLI=-DTLI \ BUGS="$(BUGS) -DSOLARIS_24_GETHOSTBYNAME_BUG" all # Generic SYSV40 esix sysv4: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl" RANLIB=echo ARFLAGS=rv \ NETGROUP=-DNETGROUP AUX_OBJ=setenv.o TLI=-DTLI all # DG/UX 5.4.1 and 5.4.2 have an unusual inet_addr() interface. dgux: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lnsl RANLIB=echo ARFLAGS=rv \ NETGROUP=-DNETGROUP AUX_OBJ=setenv.o TLI=-DTLI \ BUGS="$(BUGS) -DINET_ADDR_BUG" all dgux543: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lnsl RANLIB=echo ARFLAGS=rv \ NETGROUP=-DNETGROUP AUX_OBJ=setenv.o TLI=-DTLI all # NCR UNIX 02.02.01 and 02.03.00 (Alex Chircop, msu@unimt.mt) ncrsvr4: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lresolv -lnsl -lsocket" RANLIB=echo ARFLAGS=rv \ AUX_OBJ="setenv.o strcasecmp.o" NETGROUP= TLI=-DTLI \ EXTRA_CFLAGS="" FROM_OBJ=ncr.o all # Tandem SYSV4 (eqawas@hedgehog.ac.cowan.edu.au) tandem: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl" RANLIB=echo ARFLAGS=rv \ NETGROUP= AUX_OBJ="setenv.o strcasecmp.o" TLI=-DTLI all # Amdahl UTS 2.1.5 (Richard.Richmond@bridge.bst.bls.com) uts215: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket" RANLIB=echo \ ARFLAGS=rv AUX_OBJ=setenv.o NETGROUP=-DNO_NETGROUP TLI= all # UXP/DS System V.4 clone (vic@uida0.uida.es). uxp: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-L/usr/ucblib -lsocket -lnsl -lucb" \ RANLIB=echo ARFLAGS=rv NETGROUP=-DNETGROUP \ AUX_OBJ=setenv.o TLI="-DTLI -DDRS_XTI" all # DELL System V.4 Issue 2.2 using gcc (kim@tac.nyc.ny.us, jurban@norden1.com) dell-gcc: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl" RANLIB=ranlib ARFLAGS=rv CC=gcc \ AUX_OBJ="setenv.o strcasecmp.o" TLI=-DTLI all # SCO 3.2v4.1 no frills (jedwards@sol1.solinet.net). sco: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl_s" RANLIB=echo ARFLAGS=rv \ NETGROUP= AUX_OBJ=setenv.o TLI= all # SCO OpenDesktop 2.0, release 3.2 (peter@midnight.com). Please simplify. sco-od2: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lrpcsvc -lrpc -lyp -lrpc -lrpcsvc -lsocket" \ RANLIB=echo ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= all # SCO 3.2v4.2 with TCP/IP 1.2.1 (Eduard.Vopicka@vse.cz). Please simplify. sco-nis: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lyp -lrpc -lsocket -lyp -lc_s -lc" \ RANLIB=echo ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= EXTRA_CFLAGS="-nointl -DNO_NETGRENT" all # SCO 3.2v5.0.0 OpenServer 5 (bob@odt.handy.com, bill@razorlogic.com) sco-os5: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lrpcsvc -lsocket" RANLIB=echo ARFLAGS=rv VSYSLOG= \ AUX_OBJ=setenv.o NETGROUP=-DNETGROUP TLI= all # sinix 5.42 setjmp workaround (szrzs023@ub3.ub.uni-kiel.de) sinix: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl -L/usr/ccs/lib -lc -L/usr/ucblib -lucb" \ RANLIB=echo ARFLAGS=rv AUX_OBJ=setenv.o TLI=-DTLI all # Domain SR10.4. Build under bsd, run under either sysv3 or bsd43. apollo: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=setenv.o \ NETGROUP=-DNETGROUP TLI= SYSTYPE="-A run,any -A sys,any" all # Pyramid OSx 5.1, using the BSD universe. pyramid: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ="environ.o vfprintf.o" \ STRINGS="-Dstrchr=index -Dstrrchr=rindex -Dmemcmp=bcmp -Dno_memcpy" \ NETGROUP="-DNETGROUP -DUSE_GETDOMAIN" TLI= all # Untested. mips: @echo "Warning: some definitions may be wrong." make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP=-DNETGROUP TLI= SYSTYPE="-sysname bsd43" all # Cray (tested with UNICOS 7.0.4). unicos7: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS=-lnet RANLIB=echo ARFLAGS=rv \ EXTRA_CFLAGS=-DINADDR_NONE="\"((unsigned long) -1)\"" \ AUX_OBJ="setenv.o strcasecmp.o" NETGROUP= TLI= all # Unicos 8.x, Cray-YMP (Bruce Kelly). unicos8: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=echo AR=bld ARFLAGS=rv \ AUX_OBJ= NETGROUP= TLI= all # Power_UNIX 2.1.1 (amantel@lerc.nasa.gov) power_unix_211: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lnsl -lsocket -lgen -lresolv" RANLIB=echo ARFLAGS=rv \ NETGROUP= AUX_OBJ=setenv.o TLI=-DTLI BUGS="$(BUGS)" all # ISC (fc@all.net) isc: make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-linet -lnsl_s -ldbm" RANLIB=echo ARFLAGS=rv \ AUX_OBJ="setenv.o strcasecmp.o" EXTRA_CFLAGS="-DENOTCONN=ENAVAIL" \ NETGROUP= TLI= all # Interactive UNIX R3.2 version 4.0 (Bobby D. Wright). iunix: make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-linet -lnsl_s -ldbm" RANLIB=echo ARFLAGS=rv \ AUX_OBJ=environ.o strcasecmp.o NETGROUP= TLI= all # RTU 6.0 on a Masscomp 5400 (ben@piglet.cr.usgs.gov). When using the # advanced installation, increment argv before actually looking at it. rtu: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP= TLI= all # Unixware sans NIS (mc@telebase.com). Compiler dislikes strcasecmp.c. unixware1: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl -lc -L/usr/ucblib -lucb" RANLIB=echo ARFLAGS=rv \ NETGROUP=$(NETGROUP) AUX_OBJ=environ.o TLI=-DTLI all unixware2: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl -lgen -lc -L/usr/ucblib -lucb" RANLIB=echo \ ARFLAGS=rv NETGROUP=$(NETGROUP) AUX_OBJ=environ.o TLI=-DTLI all u6000: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS="-lsocket -lnsl" RANLIB=echo ARFLAGS=rv \ NETGROUP=-DNETGROUP AUX_OBJ="setenv.o strcasecmp.o" TLI=-DTLI all # MachTen machten: @make REAL_DAEMON_DIR=$(REAL_DAEMON_DIR) STYLE=$(STYLE) \ LIBS= RANLIB=ranlib ARFLAGS=rv AUX_OBJ=environ.o \ NETGROUP= TLI= all ############################################################### # System dependencies: TLI (transport-level interface) support. # # Uncomment the following macro if your system has System V.4-style TLI # support (/usr/include/sys/timod.h, /etc/netconfig, and the netdir(3) # routines). # #TLI = -DTLI ############################################################################### # System dependencies: differences between ranlib(1) and ar(1) implementations. # # Some C compilers (Ultrix 4.x) insist that ranlib(1) be run on an object # library; some don't care as long as the modules are in the right order; # some systems don't even have a ranlib(1) command. Make your choice. RANLIB = ranlib # have ranlib (BSD-ish UNIX) #RANLIB = echo # no ranlib (SYSV-ish UNIX) ARFLAGS = rv # most systems #ARFLAGS= rvs # IRIX 4.0.x AR = ar #AR = bld # Unicos 8.x ############################################################################# # System dependencies: routines that are not present in the system libraries. # # If your system library does not have set/putenv() or strcasecmp(), use # the ones provided with this source distribution. The environ.c module # implements setenv(), getenv(), and putenv(). AUX_OBJ= setenv.o #AUX_OBJ= environ.o #AUX_OBJ= environ.o strcasecmp.o # Uncomment the following if your C library does not provide the # strchr/strrchr/memcmp routines, but comes with index/rindex/bcmp. # #STRINGS= -Dstrchr=index -Dstrrchr=rindex -Dmemcmp=bcmp -Dno_memcpy ################################################################# # System dependencies: selection of non-default object libraries. # # Most System V implementations require that you explicitly specify the # networking libraries. There is no general consensus, though. # #LIBS = -lsocket -lnsl # SysV.4 Solaris 2.x #LIBS = -lsun # IRIX #LIBS = -lsocket -linet -lnsl -lnfs # PTX #LIBS = -linet -lnsl_s -ldbm # ISC #LIBS = -lnet # Unicos 7 #LIBS = -linet -lsyslog -ldbm #LIBS = -lsyslog -lsocket -lnsl ###################################################### # System dependencies: system-specific compiler flags. # # Apollo Domain/OS offers both bsd and sys5 environments, sometimes # on the same machine. If your Apollo is primarily sys5.3 and also # has bsd4.3, uncomment the following to build under bsd and run under # either environment. # #SYSTYPE= -A run,any -A sys,any # For MIPS RISC/os 4_52.p3, uncomment the following definition. # #SYSTYPE= -sysname bsd43 ################################################## # System dependencies: working around system bugs. # # -DGETPEERNAME_BUG works around a getpeername(2) bug in some versions of # Apollo or SYSV.4 UNIX: the wrapper would report that all UDP requests # come from address 0.0.0.0. The workaround does no harm on other systems. # # -DBROKEN_FGETS works around an fgets(3) bug in some System V versions # (IRIX): fgets() gives up too fast when reading from a network socket. # The workaround does no harm on other systems. # # Some UNIX systems (IRIX) make the error of calling the strtok() library # routine from other library routines such as, e.g., gethostbyname/addr(). # The result is that hosts can slip through the wrapper allow/deny filters. # Compile with -DLIBC_CALLS_STRTOK to avoid the vendor's strtok() routine. # The workaround does no harm on other systems. # # DG/UX 5.4.1 comes with an inet_ntoa() function that returns a structure # instead of a long integer. Compile with -DINET_ADDR_BUG to work around # this mutant behavour. Fixed in 5.4R3. # # Solaris 2.4 gethostbyname(), in DNS through NIS mode, puts only one # address in the host address list; all other addresses are treated as # host name aliases. Compile with -DSOLARIS_24_GETHOSTBYNAME_BUG to work # around this. The workaround does no harm on other Solaris versions. BUGS = -DGETPEERNAME_BUG -DBROKEN_FGETS -DLIBC_CALLS_STRTOK #BUGS = -DGETPEERNAME_BUG -DBROKEN_FGETS -DINET_ADDR_BUG #BUGS = -DGETPEERNAME_BUG -DBROKEN_FGETS -DSOLARIS_24_GETHOSTBYNAME_BUG ########################################################################## # System dependencies: whether or not your system has NIS (or YP) support. # # If your system supports NIS or YP-style netgroups, enable the following # macro definition. Netgroups are used only for host access control. # #NETGROUP= -DNETGROUP ############################################################### # System dependencies: whether or not your system has vsyslog() # # If your system supports vsyslog(), comment out the following definition. # If in doubt leave it in, it won't harm. VSYSLOG = -Dvsyslog=myvsyslog # End of the system dependencies. ################################# ############################## # Start of the optional stuff. ########################################### # Optional: Turning on language extensions # # Instead of the default access control language that is documented in # the hosts_access.5 document, the wrappers can be configured to # implement an extensible language documented in the hosts_options.5 # document. This language is implemented by the "options.c" source # module, which also gives hints on how to add your own extensions. # Uncomment the next definition to turn on the language extensions # (examples: allow, deny, banners, twist and spawn). # #STYLE = -DPROCESS_OPTIONS # Enable language extensions. ################################################################ # Optional: Changing the default disposition of logfile records # # By default, logfile entries are written to the same file as used for # sendmail transaction logs. See your /etc/syslog.conf file for actual # path names of logfiles. The tutorial section in the README file # gives a brief introduction to the syslog daemon. # # Change the FACILITY definition below if you disagree with the default # disposition. Some syslog versions (including Ultrix 4.x) do not provide # this flexibility. # # If nothing shows up on your system, it may be that the syslog records # are sent to a dedicated loghost. It may also be that no syslog daemon # is running at all. The README file gives pointers to surrogate syslog # implementations for systems that have no syslog library routines or # no syslog daemons. When changing the syslog.conf file, remember that # there must be TABs between fields. # # The LOG_XXX names below are taken from the /usr/include/syslog.h file. FACILITY= LOG_MAIL # LOG_MAIL is what most sendmail daemons use # The syslog priority at which successful connections are logged. SEVERITY= LOG_INFO # LOG_INFO is normally not logged to the console ########################### # Optional: Reduce DNS load # # When looking up the address for a host.domain name, the typical DNS # code will first append substrings of your own domain, so it tries # host.domain.your.own.domain, then host.domain.own.domain, and then # host.domain. The APPEND_DOT feature stops this waste of cycles. It is # off by default because it causes problems on sites that don't use DNS # and with Solaris < 2.4. APPEND_DOT will not work with hostnames taken # from /etc/hosts or from NIS maps. It does work with DNS through NIS. # # DOT= -DAPPEND_DOT ################################################## # Optional: Always attempt remote username lookups # # By default, the wrappers look up the remote username only when the # access control rules require them to do so. # # Username lookups require that the remote host runs a daemon that # supports an RFC 931 like protocol. Remote user name lookups are not # possible for UDP-based connections, and can cause noticeable delays # with connections from non-UNIX PCs. On some systems, remote username # lookups can trigger a kernel bug, causing loss of service. The README # file describes how to find out if your UNIX kernel has that problem. # # Uncomment the following definition if the wrappers should always # attempt to get the remote user name. If this is not enabled you can # still do selective username lookups as documented in the hosts_access.5 # and hosts_options.5 manual pages (`nroff -man' format). # #AUTH = -DALWAYS_RFC931 # # The default username lookup timeout is 10 seconds. This may not be long # enough for slow hosts or networks, but is enough to irritate PC users. RFC931_TIMEOUT = 10 ###################################################### # Optional: Changing the default file protection mask # # On many systems, network daemons and other system processes are started # with a zero umask value, so that world-writable files may be produced. # It is a good idea to edit your /etc/rc* files so that they begin with # an explicit umask setting. On our site we use `umask 022' because it # does not break anything yet gives adequate protection against tampering. # # The following macro specifies the default umask for processes run under # control of the daemon wrappers. Comment it out only if you are certain # that inetd and its children are started with a safe umask value. UMASK = -DDAEMON_UMASK=022 ####################################### # Optional: Turning off access control # # By default, host access control is enabled. To disable host access # control, comment out the following definition. Host access control # can also be turned off at runtime by providing no or empty access # control tables. ACCESS = -DHOSTS_ACCESS ######################################################## # Optional: Changing the access control table pathnames # # The HOSTS_ALLOW and HOSTS_DENY macros define where the programs will # look for access control information. Watch out for the quotes and # backslashes when you make changes. TABLES = -DHOSTS_DENY=\"/etc/hosts.deny\" -DHOSTS_ALLOW=\"/etc/hosts.allow\" #################################################### # Optional: dealing with host name/address conflicts # # By default, the software tries to protect against hosts that claim to # have someone elses host name. This is relevant for network services # whose authentication depends on host names, such as rsh and rlogin. # # With paranoid mode on, connections will be rejected when the host name # does not match the host address. Connections will also be rejected when # the host name is available but cannot be verified. # # Comment out the following definition if you want more control over such # requests. When paranoid mode is off and a host name double check fails, # the client can be matched with the PARANOID access control pattern. # # Paranoid mode implies hostname lookup. In order to disable hostname # lookups altogether, see the next section. PARANOID= -DPARANOID ######################################## # Optional: turning off hostname lookups # # By default, the software always attempts to look up the client # hostname. With selective hostname lookups, the client hostname # lookup is postponed until the name is required by an access control # rule or by a %letter expansion. # # In order to perform selective hostname lookups, disable paranoid # mode (see previous section) and comment out the following definition. HOSTNAME= -DALWAYS_HOSTNAME ############################################# # Optional: Turning on host ADDRESS checking # # Optionally, the software tries to protect against hosts that pretend to # have someone elses host address. This is relevant for network services # whose authentication depends on host names, such as rsh and rlogin, # because the network address is used to look up the remote host name. # # The protection is to refuse TCP connections with IP source routing # options. # # This feature cannot be used with SunOS 4.x because of a kernel bug in # the implementation of the getsockopt() system call. Kernel panics have # been observed for SunOS 4.1.[1-3]. Symptoms are "BAD TRAP" and "Data # fault" while executing the tcp_ctloutput() kernel function. # # Reportedly, Sun patch 100804-03 or 101790 fixes this for SunOS 4.1.x. # # Uncomment the following macro definition if your getsockopt() is OK. # # -DKILL_IP_OPTIONS is not needed on modern UNIX systems that can stop # source-routed traffic in the kernel. Examples: 4.4BSD derivatives, # Solaris 2.x, and Linux. See your system documentation for details. # # KILL_OPT= -DKILL_IP_OPTIONS ## End configuration options ############################ # Protection against weird shells or weird make programs. SHELL = /bin/sh .c.o:; $(CC) $(CFLAGS) -c $*.c CFLAGS = -O -DFACILITY=$(FACILITY) $(ACCESS) $(PARANOID) $(NETGROUP) \ $(BUGS) $(SYSTYPE) $(AUTH) $(UMASK) \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" $(STYLE) $(KILL_OPT) \ -DSEVERITY=$(SEVERITY) -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) \ $(UCHAR) $(TABLES) $(STRINGS) $(TLI) $(EXTRA_CFLAGS) $(DOT) \ $(VSYSLOG) $(HOSTNAME) LIB_OBJ= hosts_access.o options.o shell_cmd.o rfc931.o eval.o \ hosts_ctl.o refuse.o percent_x.o clean_exit.o $(AUX_OBJ) \ $(FROM_OBJ) fix_options.o socket.o tli.o workarounds.o \ update.o misc.o diag.o percent_m.o myvsyslog.o FROM_OBJ= fromhost.o KIT = README miscd.c tcpd.c fromhost.c hosts_access.c shell_cmd.c \ tcpd.h tcpdmatch.c Makefile hosts_access.5 strcasecmp.c BLURB rfc931.c \ tcpd.8 eval.c hosts_access.3 hosts_ctl.c percent_x.c options.c \ clean_exit.c environ.c patchlevel.h fix_options.c workarounds.c \ socket.c tli.c DISCLAIMER fakelog.c safe_finger.c hosts_options.5 \ CHANGES try-from.c update.c ptx.c vfprintf.c tli-sequent.c \ tli-sequent.h misc.c diag.c ncr.c tcpdchk.c percent_m.c \ myvsyslog.c mystdarg.h printf.ck README.IRIX Banners.Makefile \ refuse.c tcpdchk.8 setenv.c inetcf.c inetcf.h scaffold.c \ scaffold.h tcpdmatch.8 README.NIS LIB = libwrap.a all other: config-check tcpd tcpdmatch try-from safe_finger tcpdchk # Invalidate all object files when the compiler options (CFLAGS) have changed. config-check: @set +e; test -n "$(REAL_DAEMON_DIR)" || { make; exit 1; } @set +e; echo $(CFLAGS) >/tmp/cflags.$$$$ ; \ if cmp cflags /tmp/cflags.$$$$ ; \ then rm /tmp/cflags.$$$$ ; \ else mv /tmp/cflags.$$$$ cflags ; \ fi >/dev/null 2>/dev/null $(LIB): $(LIB_OBJ) rm -f $(LIB) $(AR) $(ARFLAGS) $(LIB) $(LIB_OBJ) -$(RANLIB) $(LIB) tcpd: tcpd.o $(LIB) $(CC) $(CFLAGS) -o $@ tcpd.o $(LIB) $(LIBS) miscd: miscd.o $(LIB) $(CC) $(CFLAGS) -o $@ miscd.o $(LIB) $(LIBS) safe_finger: safe_finger.o $(LIB) $(CC) $(CFLAGS) -o $@ safe_finger.o $(LIB) $(LIBS) TCPDMATCH_OBJ = tcpdmatch.o fakelog.o inetcf.o scaffold.o tcpdmatch: $(TCPDMATCH_OBJ) $(LIB) $(CC) $(CFLAGS) -o $@ $(TCPDMATCH_OBJ) $(LIB) $(LIBS) try-from: try-from.o fakelog.o $(LIB) $(CC) $(CFLAGS) -o $@ try-from.o fakelog.o $(LIB) $(LIBS) TCPDCHK_OBJ = tcpdchk.o fakelog.o inetcf.o scaffold.o tcpdchk: $(TCPDCHK_OBJ) $(LIB) $(CC) $(CFLAGS) -o $@ $(TCPDCHK_OBJ) $(LIB) $(LIBS) shar: $(KIT) @shar $(KIT) kit: $(KIT) @makekit $(KIT) files: @echo $(KIT) archive: $(ARCHIVE) $(KIT) clean: rm -f tcpd miscd safe_finger tcpdmatch tcpdchk try-from *.[oa] core \ cflags tidy: clean chmod -R a+r . chmod 755 . # Enable all bells and whistles for linting. lint: tcpd_lint miscd_lint match_lint chk_lint tcpd_lint: lint -DFACILITY=LOG_MAIL -DHOSTS_ACCESS -DPARANOID -DNETGROUP \ -DGETPEERNAME_BUG -DDAEMON_UMASK=022 -DSEVERITY=$(SEVERITY) \ $(TABLES) -DKILL_IP_OPTIONS -DPROCESS_OPTIONS \ -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) -DALWAYS_RFC931 \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" \ -Dvsyslog=myvsyslog \ tcpd.c fromhost.c socket.c tli.c hosts_access.c \ shell_cmd.c refuse.c rfc931.c eval.c percent_x.c clean_exit.c \ options.c setenv.c fix_options.c workarounds.c update.c misc.c \ diag.c myvsyslog.c percent_m.c miscd_lint: lint -DFACILITY=LOG_MAIL -DHOSTS_ACCESS -DPARANOID -DNETGROUP \ -DGETPEERNAME_BUG -DDAEMON_UMASK=022 -DSEVERITY=$(SEVERITY) \ $(TABLES) -DKILL_IP_OPTIONS -DPROCESS_OPTIONS \ -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) -DALWAYS_RFC931 \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" \ -Dvsyslog=myvsyslog \ miscd.c fromhost.c socket.c tli.c hosts_access.c \ shell_cmd.c refuse.c rfc931.c eval.c percent_x.c clean_exit.c \ options.c setenv.c fix_options.c workarounds.c update.c misc.c \ diag.c myvsyslog.c percent_m.c match_lint: lint -DFACILITY=LOG_MAIL -DSEVERITY=$(SEVERITY) -DHOSTS_ACCESS \ -DPARANOID $(TABLES) -DNETGROUP -DPROCESS_OPTIONS -DRFC931_TIMEOUT=10 \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" \ -Dvsyslog=myvsyslog \ tcpdmatch.c hosts_access.c eval.c percent_x.c options.c workarounds.c \ update.c socket.c misc.c diag.c myvsyslog.c percent_m.c setenv.c \ inetcf.c scaffold.c chk_lint: lint -DFACILITY=LOG_MAIL -DSEVERITY=$(SEVERITY) -DHOSTS_ACCESS \ -DPARANOID $(TABLES) -DNETGROUP -DPROCESS_OPTIONS -DRFC931_TIMEOUT=10 \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" \ -Dvsyslog=myvsyslog \ tcpdchk.c eval.c percent_x.c options.c update.c workarounds.c \ setenv.c misc.c diag.c myvsyslog.c percent_m.c inetcf.c scaffold.c printfck: printfck -f printf.ck \ tcpd.c fromhost.c socket.c tli.c hosts_access.c \ shell_cmd.c refuse.c rfc931.c eval.c percent_x.c clean_exit.c \ options.c setenv.c fix_options.c workarounds.c update.c misc.c \ diag.c myvsyslog.c percent_m.c >aap.c lint -DFACILITY=LOG_MAIL -DHOSTS_ACCESS -DPARANOID -DNETGROUP \ -DGETPEERNAME_BUG -DDAEMON_UMASK=022 -DSEVERITY=$(SEVERITY) \ $(TABLES) -DKILL_IP_OPTIONS -DPROCESS_OPTIONS \ -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) -DALWAYS_RFC931 \ -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" -Dvsyslog=myvsyslog aap.c printfck -f printf.ck \ tcpdchk.c eval.c percent_x.c options.c update.c workarounds.c \ setenv.c misc.c diag.c myvsyslog.c percent_m.c inetcf.c scaffold.c \ >aap.c lint -DFACILITY=LOG_MAIL -DSEVERITY=$(SEVERITY) -DHOSTS_ACCESS \ -DPARANOID $(TABLES) -DNETGROUP -DPROCESS_OPTIONS -DRFC931_TIMEOUT=10 \ -Dvsyslog=myvsyslog -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" # Internal compilation dependencies. clean_exit.o: cflags clean_exit.o: tcpd.h diag.o: cflags diag.o: mystdarg.h diag.o: tcpd.h environ.o: cflags eval.o: cflags eval.o: tcpd.h fakelog.o: cflags fakelog.o: mystdarg.h fix_options.o: cflags fix_options.o: tcpd.h fromhost.o: cflags fromhost.o: tcpd.h hosts_access.o: cflags hosts_access.o: tcpd.h hosts_ctl.o: cflags hosts_ctl.o: tcpd.h inetcf.o: cflags inetcf.o: inetcf.h inetcf.o: tcpd.h misc.o: cflags misc.o: tcpd.h miscd.o: cflags miscd.o: patchlevel.h miscd.o: tcpd.h myvsyslog.o: cflags myvsyslog.o: mystdarg.h myvsyslog.o: tcpd.h ncr.o: cflags ncr.o: tcpd.h options.o: cflags options.o: tcpd.h percent_m.o: cflags percent_m.o: mystdarg.h percent_x.o: cflags percent_x.o: tcpd.h ptx.o: cflags ptx.o: tcpd.h refuse.o: cflags refuse.o: tcpd.h rfc931.o: cflags rfc931.o: tcpd.h safe_finger.o: cflags scaffold.o: cflags scaffold.o: scaffold.h scaffold.o: tcpd.h setenv.o: cflags shell_cmd.o: cflags shell_cmd.o: tcpd.h socket.o: cflags socket.o: tcpd.h strcasecmp.o: cflags tcpd.o: cflags tcpd.o: patchlevel.h tcpd.o: tcpd.h tcpdchk.o: cflags tcpdchk.o: inetcf.h tcpdchk.o: scaffold.h tcpdchk.o: tcpd.h tcpdmatch.o: cflags tcpdmatch.o: scaffold.h tcpdmatch.o: tcpd.h tli-sequent.o: cflags tli-sequent.o: tcpd.h tli-sequent.o: tli-sequent.h tli.o: cflags tli.o: tcpd.h try-from.o: cflags try-from.o: tcpd.h update.o: cflags update.o: mystdarg.h update.o: tcpd.h vfprintf.o: cflags workarounds.o: cflags workarounds.o: tcpd.h