The D-Bus errors used in Telepathy all start with org.freedesktop.Telepathy.Error.. They are used in D-Bus messages of type ERROR, and also as plain strings annotated with the DBus_Error_Name type.

In principle, any method can raise any error (this is a general fact of IPC). For instance, generic D-Bus errors starting with org.freedesktop.DBus.Error. will occur in some situations.

Telepathy methods can also raise implementation-specific errors to indicate specialized failure conditions. For better interoperability, if a suitable Telepathy error exists, it should be preferred.

The namespace org.freedesktop.Telepathy.Qt4.Error. is reserved for use by the D-Bus client implementation in telepathy-qt4, which uses it to represent certain error situations that did not involve a D-Bus ERROR message. These errors are defined and documented as part of telepathy-qt4's C++ API, and should not be used on D-Bus.

Raised when there is an error reading from or writing to the network. Raised when the requested method, channel, etc is not available on this connection. Raised when one of the provided arguments is invalid. Raised when the requested functionality is temporarily unavailable. The user is not permitted to perform the requested operation. The connection is not currently connected and cannot be used. This error may also be raised when operations are performed on a Connection for which StatusChanged has signalled status Disconnected for reason None. The second usage corresponds to None in the Connection_Status_Reason enum; if a better reason is available, the corresponding error should be used instead. The handle specified is unknown on this channel or connection. You are banned from the channel. The channel is full. The requested channel is invite-only.

The requested channel or other resource already exists, and another user interface in this session is responsible for it.

User interfaces SHOULD handle this error unobtrusively, since it indicates that some other user interface is already processing the channel.

Raised by an ongoing request if it is cancelled by user request before it has completed, or when operations are performed on an object which the user has asked to close (for instance, a Connection where the user has called Disconnect, or a Channel where the user has called Close). The second form can be used to correspond to the Requested member in the Connection_Status_Reason enum, or to to represent the situation where disconnecting a Connection, closing a Channel, etc. has been requested by the user but this request has not yet been acted on, for instance because the service will only act on the request when it has finished processing an event queue. Raised when authentication with a service was unsuccessful. This corresponds to Authentication_Failed in the Connection_Status_Reason enum. Raised if a user request insisted that encryption should be used, but encryption was not actually available. This corresponds to part of Encryption_Error in the Connection_Status_Reason enum. It's been separated into a distinct error here because the two concepts that were part of EncryptionError seem to be things that could reasonably appear differently in the UI. Raised if encryption appears to be available, but could not actually be used (for instance if SSL/TLS negotiation fails). This corresponds to part of Encryption_Error in the Connection_Status_Reason enum. Raised if the server did not provide a SSL/TLS certificate. This error MUST NOT be used to represent the absence of a client certificate provided by the Telepathy connection manager. This corresponds to Cert_Not_Provided in the Connection_Status_Reason enum. That error explicitly applied only to server SSL certificates, so this one is similarly limited; having the CM present a client certificate is a possible future feature, but it should have its own error handling. Raised if the server provided a SSL/TLS certificate signed by an untrusted certifying authority. This error SHOULD NOT be used to represent a self-signed certificate: see the Self Signed error for that. This corresponds to Cert_Untrusted in the Connection_Status_Reason enum and to Untrusted in the TLS_Certificate_Reject_Reason enum, with a clarification to avoid ambiguity. Raised if the server provided an expired SSL/TLS certificate. This corresponds to Cert_Expired in the Connection_Status_Reason enum and to Expired in the TLS_Certificate_Reject_Reason enum. Raised if the server provided an SSL/TLS certificate that will become valid at some point in the future. This corresponds to Cert_Not_Activated in the Connection_Status_Reason enum and to Not_Activated in the TLS_Certificate_Reject_Reason enum. Raised if the server provided an SSL/TLS certificate that did not have the expected fingerprint. This corresponds to Cert_Fingerprint_Mismatch in the Connection_Status_Reason enum and to Fingerprint_Mismatch in the TLS_Certificate_Reject_Reason enum.

Raised if the server provided an SSL/TLS certificate that did not match its hostname.

You MAY be able to get more details about the expected and certified hostnames by looking up the 'expected-hostname' and 'certificate-hostname' keys in the details map that came together with this error.

This corresponds to Cert_Hostname_Mismatch in the Connection_Status_Reason enum and to Hostname_Mismatch in the TLS_Certificate_Reject_Reason enum.
Raised if the server provided an SSL/TLS certificate that is self-signed and untrusted. This corresponds to Cert_Self_Signed in the Connection_Status_Reason enum and to Self_Signed in the TLS_Certificate_Reject_Reason enum. Raised if the server provided an SSL/TLS certificate that has been revoked. This corresponds to Cert_Revoked in the Connection_Status_Reason enum and to Revoked in the TLS_Certificate_Reject_Reason enum. Raised if the server provided an SSL/TLS certificate that uses an insecure cipher algorithm or is cryptographically weak. This corresponds to Cert_Insecure in the Connection_Status_Reason enum and to Insecure in the TLS_Certificate_Reject_Reason enum. Raised if the server provided an SSL/TLS certificate that is unacceptable in some way that does not have a more specific error. This corresponds to Cert_Other_Error in the Connection_Status_Reason enum and to Unknown in the TLS_Certificate_Reject_Reason enum. Raised if the length in bytes of the server certificate, or the depth of the server certificate chain exceeds the limits imposed by the crypto library. This corresponds to Cert_Limit_Exceeded in the Connection_Status_Reason enum and to Limit_Exceeded in the TLS_Certificate_Reject_Reason enum. Raised when requested functionality is unavailable due to contact not having required capabilities. Raised when requested functionality is unavailable because a contact is offline. This corresponds to Offline in the Channel_Group_Change_Reason enum. Used to represent a user being ejected from a channel by another user, for instance being kicked from a chatroom. This corresponds to Kicked in the Channel_Group_Change_Reason enum. Used to represent a user being removed from a channel because of a "busy" indication. This error SHOULD NOT be used to represent a server or other infrastructure being too busy to process a request - for that, see ServerBusy. This corresponds to Busy in the Channel_Group_Change_Reason enum. Used to represent a user being removed from a channel because they did not respond, e.g. to a StreamedMedia call. This corresponds to No_Answer in the Channel_Group_Change_Reason enum. Raised when the requested user does not, in fact, exist. This corresponds to Invalid_Contact in the Channel_Group_Change_Reason enum, but can also be used to represent other things not existing (like chatrooms, perhaps). Raised when a channel is terminated for an unspecified reason. In particular, this error SHOULD be used whenever normal termination of a 1-1 StreamedMedia call by the remote user is represented as a D-Bus error name. This corresponds to None in the Channel_Group_Change_Reason enum. Raised when the local streaming implementation has no codecs in common with the remote side. This corresponds to Media_Error. The media stream type requested is not supported by either the local or remote side. This corresponds to Media_Error. Raised when the call's streaming implementation has some kind of internal error. This corresponds to Internal_Error. Raised when a connection is refused. Raised when a connection can't be established. Raised when a connection is broken. Raised when the user attempts to connect to an account but they are already connected (perhaps from another client or computer), and the protocol or account settings do not allow this. XMPP can have this behaviour if the user chooses the same resource in both clients (it is server-dependent whether the result is AlreadyConnected on the new connection, ConnectionReplaced on the old connection, or two successful connections). Raised by an existing connection to an account if it is replaced by a new connection (perhaps from another client or computer). In MSNP, when connecting twice with the same Passport, the new connection "wins" and the old one is automatically disconnected. XMPP can also have this behaviour if the user chooses the same resource in two clients (it is server-dependent whether the result is AlreadyConnected on the new connection, ConnectionReplaced on the old connection, or two successful connections). Raised during in-band registration if the server indicates that the requested account already exists. Raised if a server or some other piece of infrastructure cannot process the request, e.g. due to resource limitations. Clients MAY try again later. This is not the same error as Busy, which indicates that a user is busy. Raised if a request cannot be satisfied because a process local to the user has insufficient resources. Clients MAY try again later. For instance, the ChannelDispatcher might raise this error for some or all channel requests if it has detected that there is not enough free memory. Raised if a request cannot be satisfied without violating an earlier request for anonymity, and the earlier request specified that raising an error is preferable to disclosing the user's identity (for instance via Connection.Interface.Anonymity.AnonymityMandatory or Channel.Interface.Anonymity.AnonymityMandatory). Raised when the requested functionality is not yet available, but is likely to become available after some time has passed. Raised when an incoming or outgoing Call1 is rejected by the the receiver. Raised when a call was terminated as a result of the local user picking up the call on a different resource. Raised when a server or other piece of infrastructure indicates an internal error, or when a message that makes no sense is received from a server or other piece of infrastructure. For instance, this is appropriate for XMPP's internal-server-error, and is also appropriate if you receive sufficiently inconsistent information from a server that you cannot continue. Raised if a server rejects protocol messages from a connection manager claiming that they do not make sense, two local processes fail to understand each other, or an apparently impossible situation is reached. For instance, this would be an appropriate mapping for XMPP's errors bad-format, invalid-xml, etc., which can't happen unless the local (or remote) XMPP implementation is faulty. This is also analogous to Invalid_CM_Behavior, TP_DBUS_ERROR_INCONSISTENT in telepathy-glib, and TELEPATHY_QT4_ERROR_INCONSISTENT in telepathy-qt4.

Raised as a ConnectionError when a Connection cannot be established because either the Connection Manager or its support library (e.g. wocky, papyon, sofiasip) requires upgrading to support a newer protocol version.

This error corresponds to the Connection_Status_Reason of Network_Error.

Some protocols transmit a protocol or library version number to the server, which will disconnect them if the version isn't appropriate. This way we can report the error to the user, and if appropriate, the user's client can check for updates.
Raised if a client attempts to dial a number that is recognized as an emergency number (e.g. '911' in the USA), but the Connection Manager or provider does not support dialling emergency numbers. Many VOIP providers have the ability to dial traditional (PSTN) telephone numbers, but do not provide the ability to dial emergency numbers (for instance, Google Voice). This error provides additional information about why such a call was unsuccessful.

Raised if the user has insufficient Balance to place a call or send a message.

The key 'balance-required' MAY be included in CallStateDetails or a delivery report's Message_Part (with the same units and scale as AccountBalance) to indicate how much credit is required to make this call or send this message.

Raised if the CaptchaAuthentication1 Handler either has no UI to present captchas, or it does, but wasn't able to answer any of the captchas given.

Copyright © 2005-2010 Collabora Limited Copyright © 2005-2009 Nokia Corporation

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.