include/configs: Use new CONFIG_CMD_* in various d* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

4 files changed, 84 insertions, 46 deletions

diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 4cc5085293..c0f5a09900 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -75,21 +75,48 @@
 #ifdef CONFIG_DBAU1550
 /* Boot from flash by default, revert to bootp */
 #define CONFIG_BOOTCOMMAND	"bootm 0xbfc20000; bootp; bootm"
-
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_NET) & \
-				 ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FPGA | CFG_CMD_IDE | \
-				   CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
-				   CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
 #else /* CONFIG_DBAU1550 */
 #define CONFIG_BOOTCOMMAND	"bootp;bootm"
-
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
-				 ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
-				   CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | \
-				   CFG_CMD_ELF | CFG_CMD_BDI | CFG_CMD_BEDBUG))
 #endif /* CONFIG_DBAU1550 */
 
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_RUN
+
+
+#ifdef CONFIG_DBAU1550
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_PCMCIA
+
+#else
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#endif
+
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 8ff963f55a..96c76483aa 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -122,23 +122,26 @@
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_DRAM_SPEED	100		/* MHz */
 
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL	| \
-				  CFG_CMD_ASKENV	| \
-				  CFG_CMD_CACHE		| \
-				  CFG_CMD_DATE		| \
-				  CFG_CMD_DHCP		| \
-				  CFG_CMD_DIAG		| \
-				  CFG_CMD_EEPROM	| \
-				  CFG_CMD_ELF		| \
-				  CFG_CMD_I2C		| \
-				  CFG_CMD_JFFS2		| \
-				  CFG_CMD_KGBD		| \
-				  CFG_CMD_PCI		| \
-				  CFG_CMD_PING		| \
-				  CFG_CMD_SAVES		| \
-				  CFG_CMD_SDRAM)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_KGBD
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
 
 
 /*
@@ -435,7 +438,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 15681208b6..7df72800f5 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -87,22 +87,28 @@
 
 #define CONFIG_BAUDRATE		115200
 
-/* #define CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 #ifdef TURN_ON_ETHERNET
-# define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_PING)
+
+#define CONFIG_CMD_PING
+
 #else
-# define CONFIG_COMMANDS	((CONFIG_CMD_DFL \
-				  | CFG_CMD_ENV \
-				  | CFG_CMD_NAND \
-				  | CFG_CMD_I2C) \
-				 & ~(CFG_CMD_NET \
-				     | CFG_CMD_FLASH \
-				     | CFG_CMD_IMLS))
-#endif
 
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+#endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	-1
 #define CONFIG_ETHADDR		08:00:3e:26:0a:5b
@@ -114,7 +120,7 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_TIMESTAMP
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index 9ac2856f65..e58a2f219c 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -66,10 +66,12 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS    	"root=ramfs devfs=mount console=ttySA0,115200"
@@ -80,7 +82,7 @@
 #define CONFIG_BOOTFILE		"dnp1110"
 #define CONFIG_BOOTCOMMAND	"tftp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif