Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqWIP/06Mar2021

- Convert qemu-ppce500 to driver model and enable additional driver
  support
- bug fixes/updates in net-dsa driver, vid driver, move configs to kconfig
- Update Maintainers of some powerpc, layerscape platforms

64 files changed, 924 insertions, 817 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 4d46587214..ae0b7b21e8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -640,3 +640,13 @@ config HAS_FSL_XHCI_USB
 	help
 	  For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
 	  pins, select it when the pins are assigned to USB.
+
+config SYS_FSL_BOOTROM_BASE
+	hex
+	depends on FSL_LSCH2
+	default 0
+
+config SYS_FSL_BOOTROM_SIZE
+	hex
+	depends on FSL_LSCH2
+	default 0x1000000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 4335aa0ec2..c51b65ea36 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -69,8 +69,6 @@
 #define CONFIG_SYS_FSL_DRAM_SIZE2	0x7F80000000
 #endif
 #elif defined(CONFIG_FSL_LSCH2)
-#define CONFIG_SYS_FSL_BOOTROM_BASE	0x0
-#define CONFIG_SYS_FSL_BOOTROM_SIZE	0x1000000
 #define CONFIG_SYS_FSL_CCSR_BASE	0x1000000
 #define CONFIG_SYS_FSL_CCSR_SIZE	0xf000000
 #define CONFIG_SYS_FSL_DCSR_BASE	0x20000000
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 6f90518927..124c22f58a 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -51,14 +51,17 @@ config TARGET_P5040DS
 config TARGET_MPC8541CDS
 	bool "Support MPC8541CDS"
 	select ARCH_MPC8541
+	select FSL_VIA
 
 config TARGET_MPC8548CDS
 	bool "Support MPC8548CDS"
 	select ARCH_MPC8548
+	select FSL_VIA
 
 config TARGET_MPC8555CDS
 	bool "Support MPC8555CDS"
 	select ARCH_MPC8555
+	select FSL_VIA
 
 config TARGET_MPC8568MDS
 	bool "Support MPC8568MDS"
@@ -1409,6 +1412,10 @@ config SYS_FSL_LBC_CLK_DIV
 		Defines divider of platform clock(clock input to
 		eLBC controller).
 
+config FSL_VIA
+	bool
+
+source "board/emulation/qemu-ppce500/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
@@ -1417,7 +1424,6 @@ source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/p1010rdb/Kconfig"
 source "board/freescale/p1_p2_rdb_pc/Kconfig"
 source "board/freescale/p2041rdb/Kconfig"
-source "board/freescale/qemu-ppce500/Kconfig"
 source "board/freescale/t102xrdb/Kconfig"
 source "board/freescale/t104xrdb/Kconfig"
 source "board/freescale/t208xqds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 5170610f04..fc25bb28ad 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -395,7 +395,9 @@ int cpu_mmc_init(struct bd_info *bis)
 void print_reginfo(void)
 {
 	print_tlbcam();
+#ifdef CONFIG_FSL_LAW
 	print_laws();
+#endif
 #if defined(CONFIG_FSL_LBC)
 	print_lbc_regs();
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 4195ecc5c9..5a0d33b1b3 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -123,7 +123,9 @@ void cpu_init_early_f(void *fdt)
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3);
 #endif
 
+#ifdef CONFIG_FSL_LAW
 	init_laws();
+#endif
 
 /*
  * Work Around for IFC Erratum A003399, issue will hit only when execution
diff --git a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h
index c7086a8361..79ba7868c2 100644
--- a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h
+++ b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h
@@ -18,7 +18,7 @@
 #endif
 
 struct mpc8xxx_gpio_plat {
-	ulong addr;
+	phys_addr_t addr;
 	unsigned long size;
 	uint ngpios;
 };
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index c6c009261d..905613fa31 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -272,6 +272,7 @@ typedef struct ccsr_gpio {
 	u32	gpier;
 	u32	gpimr;
 	u32	gpicr;
+	u32	gpibe;
 } ccsr_gpio_t;
 #endif
 
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 6d76e3e99c..998a82aa0d 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -10,7 +10,10 @@
 #include <asm/byteorder.h>
 
 #ifdef CONFIG_ADDR_MAP
+#include <asm/global_data.h>
 #include <addr_map.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #define SIO_CONFIG_RA   0x398
@@ -303,20 +306,20 @@ static inline void out_be32(volatile unsigned __iomem *addr, u32 val)
 static inline void *phys_to_virt(phys_addr_t paddr)
 {
 #ifdef CONFIG_ADDR_MAP
-	return addrmap_phys_to_virt(paddr);
-#else
-	return (void *)((unsigned long)paddr);
+	if (gd->flags & GD_FLG_RELOC)
+		return addrmap_phys_to_virt(paddr);
 #endif
+	return (void *)((unsigned long)paddr);
 }
 #define phys_to_virt phys_to_virt
 
 static inline phys_addr_t virt_to_phys(void * vaddr)
 {
 #ifdef CONFIG_ADDR_MAP
-	return addrmap_virt_to_phys(vaddr);
-#else
-	return (phys_addr_t)((unsigned long)vaddr);
+	if (gd->flags & GD_FLG_RELOC)
+		return addrmap_virt_to_phys(vaddr);
 #endif
+	return (phys_addr_t)((unsigned long)vaddr);
 }
 #define virt_to_phys virt_to_phys
 
diff --git a/board/freescale/qemu-ppce500/Kconfig b/board/emulation/qemu-ppce500/Kconfig
index 236cd17f99..4312d986d8 100644
--- a/board/freescale/qemu-ppce500/Kconfig
+++ b/board/emulation/qemu-ppce500/Kconfig
@@ -4,7 +4,7 @@ config SYS_BOARD
 	default "qemu-ppce500"
 
 config SYS_VENDOR
-	default "freescale"
+	default "emulation"
 
 config SYS_CONFIG_NAME
 	default "qemu-ppce500"
diff --git a/board/emulation/qemu-ppce500/MAINTAINERS b/board/emulation/qemu-ppce500/MAINTAINERS
new file mode 100644
index 0000000000..7317983d6a
--- /dev/null
+++ b/board/emulation/qemu-ppce500/MAINTAINERS
@@ -0,0 +1,7 @@
+QEMU-PPCE500 BOARD
+M:	Alexander Graf <agraf@csgraf.de>
+M:	Bin Meng <bmeng.cn@gmail.com>
+S:	Maintained
+F:	board/emulation/qemu-ppce500/
+F:	include/configs/qemu-ppce500.h
+F:	configs/qemu-ppce500_defconfig
diff --git a/board/freescale/qemu-ppce500/Makefile b/board/emulation/qemu-ppce500/Makefile
index 817d06d845..817d06d845 100644
--- a/board/freescale/qemu-ppce500/Makefile
+++ b/board/emulation/qemu-ppce500/Makefile
diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/emulation/qemu-ppce500/qemu-ppce500.c
index aa5774fd79..daa103c564 100644
--- a/board/freescale/qemu-ppce500/qemu-ppce500.c
+++ b/board/emulation/qemu-ppce500/qemu-ppce500.c
@@ -1,11 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2007,2009-2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2021, Bin Meng <bmeng.cn@gmail.com>
  */
 
 #include <common.h>
 #include <command.h>
 #include <cpu_func.h>
+#include <dm.h>
 #include <env.h>
 #include <init.h>
 #include <log.h>
@@ -23,12 +25,17 @@
 #include <fdtdec.h>
 #include <errno.h>
 #include <malloc.h>
+#include <virtio_types.h>
+#include <virtio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static void *get_fdt_virt(void)
 {
-	return (void *)CONFIG_SYS_TMPVIRT;
+	if (gd->flags & GD_FLG_RELOC)
+		return (void *)gd->fdt_blob;
+	else
+		return (void *)CONFIG_SYS_TMPVIRT;
 }
 
 static uint64_t get_fdt_phys(void)
@@ -74,33 +81,14 @@ uint64_t get_phys_ccsrbar_addr_early(void)
 	return r;
 }
 
-int board_early_init_f(void)
-{
-	return 0;
-}
-
 int checkboard(void)
 {
 	return 0;
 }
 
-static int pci_map_region(void *fdt, int pci_node, int range_id,
-			  phys_size_t *ppaddr, pci_addr_t *pvaddr,
-			  pci_size_t *psize, ulong *pmap_addr)
+static int pci_map_region(phys_addr_t paddr, phys_size_t size, ulong *pmap_addr)
 {
-	uint64_t addr;
-	uint64_t size;
 	ulong map_addr;
-	int r;
-
-	r = fdt_read_range(fdt, pci_node, range_id, NULL, &addr, &size);
-	if (r)
-		return r;
-
-	if (ppaddr)
-		*ppaddr = addr;
-	if (psize)
-		*psize = size;
 
 	if (!pmap_addr)
 		return 0;
@@ -115,90 +103,52 @@ static int pci_map_region(void *fdt, int pci_node, int range_id,
 		return -1;
 
 	/* Map virtual memory for range */
-	assert(!tlb_map_range(map_addr, addr, size, TLB_MAP_IO));
+	assert(!tlb_map_range(map_addr, paddr, size, TLB_MAP_IO));
 	*pmap_addr = map_addr + size;
 
-	if (pvaddr)
-		*pvaddr = map_addr;
-
 	return 0;
 }
 
-void pci_init_board(void)
+int misc_init_r(void)
 {
-	struct pci_controller *pci_hoses;
-	void *fdt = get_fdt_virt();
-	int pci_node = -1;
-	int pci_num = 0;
-	int pci_count = 0;
+	struct udevice *dev;
+	struct pci_region *io;
+	struct pci_region *mem;
+	struct pci_region *pre;
 	ulong map_addr;
+	int ret;
+
+	/* Ensure PCI is probed */
+	uclass_first_device(UCLASS_PCI, &dev);
 
-	puts("\n");
+	pci_get_regions(dev, &io, &mem, &pre);
 
 	/* Start MMIO and PIO range maps above RAM */
 	map_addr = CONFIG_SYS_PCI_MAP_START;
 
-	/* Count and allocate PCI buses */
-	pci_node = fdt_node_offset_by_prop_value(fdt, pci_node,
-			"device_type", "pci", 4);
-	while (pci_node != -FDT_ERR_NOTFOUND) {
-		pci_node = fdt_node_offset_by_prop_value(fdt, pci_node,
-				"device_type", "pci", 4);
-		pci_count++;
-	}
+	/* Map MMIO range */
+	ret = pci_map_region(mem->phys_start, mem->size, &map_addr);
+	if (ret)
+		return ret;
 
-	if (pci_count) {
-		pci_hoses = malloc(sizeof(struct pci_controller) * pci_count);
-	} else {
-		printf("PCI: disabled\n\n");
-		return;
-	}
+	/* Map PIO range */
+	ret = pci_map_region(io->phys_start, io->size, &map_addr);
+	if (ret)
+		return ret;
 
-	/* Spawn PCI buses based on device tree */
-	pci_node = fdt_node_offset_by_prop_value(fdt, pci_node,
-			"device_type", "pci", 4);
-	while (pci_node != -FDT_ERR_NOTFOUND) {
-		struct fsl_pci_info pci_info = { };
-		const fdt32_t *reg;
-		int r;
-
-		reg = fdt_getprop(fdt, pci_node, "reg", NULL);
-		pci_info.regs = fdt_translate_address(fdt, pci_node, reg);
-
-		/* Map MMIO range */
-		r = pci_map_region(fdt, pci_node, 0, &pci_info.mem_phys, NULL,
-				   &pci_info.mem_size, &map_addr);
-		if (r)
-			break;
-
-		/* Map PIO range */
-		r = pci_map_region(fdt, pci_node, 1, &pci_info.io_phys, NULL,
-				   &pci_info.io_size, &map_addr);
-		if (r)
-			break;
-
-		/*
-		 * The PCI framework finds virtual addresses for the buses
-		 * through our address map, so tell it the physical addresses.
-		 */
-		pci_info.mem_bus = pci_info.mem_phys;
-		pci_info.io_bus = pci_info.io_phys;
-
-		/* Instantiate */
-		pci_info.pci_num = pci_num + 1;
-
-		fsl_setup_hose(&pci_hoses[pci_num], pci_info.regs);
-		printf("PCI: base address %lx\n", pci_info.regs);
-
-		fsl_pci_init_port(&pci_info, &pci_hoses[pci_num], pci_num);
-
-		/* Jump to next PCI node */
-		pci_node = fdt_node_offset_by_prop_value(fdt, pci_node,
-				"device_type", "pci", 4);
-		pci_num++;
-	}
+	/*
+	 * Make sure virtio bus is enumerated so that peripherals
+	 * on the virtio bus can be discovered by their drivers.
+	 */
+	virtio_init();
+
+	/*
+	 * U-Boot is relocated to RAM already, let's delete the temporary FDT
+	 * virtual-physical mapping that was used in the pre-relocation phase.
+	 */
+	disable_tlb(find_tlb_idx((void *)CONFIG_SYS_TMPVIRT, 1));
 
-	puts("\n");
+	return 0;
 }
 
 int last_stage_init(void)
@@ -219,9 +169,6 @@ int last_stage_init(void)
 	if (prop && (len >= 8))
 		env_set_hex("qemu_kernel_addr", *prop);
 
-	/* Give the user a variable for the host fdt */
-	env_set_hex("fdt_addr_r", (ulong)fdt);
-
 	return 0;
 }
 
@@ -241,30 +188,6 @@ static uint64_t get_linear_ram_size(void)
 	panic("Couldn't determine RAM size");
 }
 
-int board_eth_init(struct bd_info *bis)
-{
-	return pci_eth_init(bis);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-
-	return 0;
-}
-#endif
-
-void print_laws(void)
-{
-	/* We don't emulate LAWs yet */
-}
-
-phys_size_t fixed_sdram(void)
-{
-	return get_linear_ram_size();
-}
-
 phys_size_t fsl_ddr_sdram_size(void)
 {
 	return get_linear_ram_size();
@@ -303,11 +226,6 @@ void init_tlbs(void)
 			      1024 * 1024, TLB_MAP_RAM));
 }
 
-void init_laws(void)
-{
-	/* We don't emulate LAWs yet */
-}
-
 static uint32_t get_cpu_freq(void)
 {
 	void *fdt = get_fdt_virt();
@@ -380,3 +298,19 @@ u32 cpu_mask(void)
 {
 	return (1 << cpu_numcores()) - 1;
 }
+
+/**
+ * Return the virtual address of FDT that was passed by QEMU
+ *
+ * @return virtual address of FDT received from QEMU in r3 register
+ */
+void *board_fdt_blob_setup(void)
+{
+	return get_fdt_virt();
+}
+
+/* See CONFIG_SYS_NS16550_CLK in arch/powerpc/include/asm/config.h */
+int get_serial_clock(void)
+{
+	return get_bus_freq(0);
+}
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 1b1fd69cb2..17db755951 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -21,18 +21,37 @@ config CMD_ESBC_VALIDATE
 	    esbc_validate - validate signature using RSA verification
 	    esbc_halt - put the core in spin loop (Secure Boot Only)
 
+config VID
+	depends on DM_I2C
+	bool "Enable Freescale VID"
+	help
+	 This option enables setting core voltage based on individual
+	 values saved in SoC fuses.
+
 config VOL_MONITOR_LTC3882_READ
 	depends on VID
 	bool "Enable the LTC3882 voltage monitor read"
-	default n
 	help
 	 This option enables LTC3882 voltage monitor read
-	 functionality. It is used by common VID driver.
+	 functionality. It is used by the common VID driver.
 
 config VOL_MONITOR_LTC3882_SET
 	depends on VID
 	bool "Enable the LTC3882 voltage monitor set"
-	default n
 	help
 	 This option enables LTC3882 voltage monitor set
-	 functionality. It is used by common VID driver.
+	 functionality. It is used by the common VID driver.
+
+config VOL_MONITOR_ISL68233_READ
+	depends on VID
+	bool "Enable the ISL68233 voltage monitor read"
+	help
+	 This option enables ISL68233 voltage monitor read
+	 functionality. It is used by the common VID driver.
+
+config VOL_MONITOR_ISL68233_SET
+	depends on VID
+	bool "Enable the ISL68233 voltage monitor set"
+	help
+	 This option enables ISL68233 voltage monitor set
+	 functionality. It is used by the common VID driver.
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 20f5421da0..6e8296293b 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -2,6 +2,7 @@
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  * Copyright 2020 NXP
+ * Copyright 2020 Stephen Carlson <stcarlso@linux.microsoft.com>
  */
 
 #include <common.h>
@@ -21,14 +22,22 @@
 #include <linux/delay.h>
 #include "vid.h"
 
+/* Voltages are generally handled in mV to keep them as integers */
+#define MV_PER_V 1000
+
+/*
+ * Select the channel on the I2C mux (on some NXP boards) that contains
+ * the voltage regulator to use for VID. Return 0 for success or nonzero
+ * for failure.
+ */
 int __weak i2c_multiplexer_select_vid_channel(u8 channel)
 {
 	return 0;
 }
 
 /*
- * Compensate for a board specific voltage drop between regulator and SoC
- * return a value in mV
+ * Compensate for a board specific voltage drop between regulator and SoC.
+ * Returns the voltage offset in mV.
  */
 int __weak board_vdd_drop_compensation(void)
 {
@@ -36,13 +45,94 @@ int __weak board_vdd_drop_compensation(void)
 }
 
 /*
- * Board specific settings for specific voltage value
+ * Performs any board specific adjustments after the VID voltage has been
+ * set. Return 0 for success or nonzero for failure.
  */
 int __weak board_adjust_vdd(int vdd)
 {
 	return 0;
 }
 
+/*
+ * Processor specific method of converting the fuse value read from VID
+ * registers into the core voltage to supply. Return the voltage in mV.
+ */
+u16 __weak soc_get_fuse_vid(int vid_index)
+{
+	/* Default VDD for Layerscape Chassis 1 devices */
+	static const u16 vdd[32] = {
+		0,      /* unused */
+		9875,   /* 0.9875V */
+		9750,
+		9625,
+		9500,
+		9375,
+		9250,
+		9125,
+		9000,
+		8875,
+		8750,
+		8625,
+		8500,
+		8375,
+		8250,
+		8125,
+		10000,  /* 1.0000V */
+		10125,
+		10250,
+		10375,
+		10500,
+		10625,
+		10750,
+		10875,
+		11000,
+		0,      /* reserved */
+	};
+	return vdd[vid_index];
+}
+
+#ifndef I2C_VOL_MONITOR_ADDR
+#define I2C_VOL_MONITOR_ADDR                    0
+#endif
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+#define DEVICE_HANDLE_T struct udevice *
+
+#ifndef I2C_VOL_MONITOR_BUS
+#define I2C_VOL_MONITOR_BUS			0
+#endif
+
+/* If DM is in use, retrieve the udevice chip for the specified bus number */
+static int vid_get_device(int address, DEVICE_HANDLE_T *dev)
+{
+	int ret = i2c_get_chip_for_busnum(I2C_VOL_MONITOR_BUS, address, 1, dev);
+
+	if (ret)
+		printf("VID: Bus %d has no device with address 0x%02X\n",
+		       I2C_VOL_MONITOR_BUS, address);
+	return ret;
+}
+
+#define I2C_READ(dev, register, data, length) \
+	dm_i2c_read(dev, register, data, length)
+#define I2C_WRITE(dev, register, data, length) \
+	dm_i2c_write(dev, register, data, length)
+#else
+#define DEVICE_HANDLE_T int
+
+/* If DM is not in use, I2C addresses are passed directly */
+static int vid_get_device(int address, DEVICE_HANDLE_T *dev)
+{
+	*dev = address;
+	return 0;
+}
+
+#define I2C_READ(dev, register, data, length) \
+	i2c_read(dev, register, 1, data, length)
+#define I2C_WRITE(dev, register, data, length) \
+	i2c_write(dev, register, 1, data, length)
+#endif
+
 #if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
 	defined(CONFIG_VOL_MONITOR_IR36021_READ)
 /*
@@ -60,30 +150,22 @@ int __weak board_adjust_vdd(int vdd)
  */
 static int find_ir_chip_on_i2c(void)
 {
-	int i2caddress;
-	int ret;
-	u8 byte;
-	int i;
+	int i2caddress, ret, i;
+	u8 mfrID;
 	const int ir_i2c_addr[] = {0x38, 0x08, 0x09};
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *dev;
-#endif
+	DEVICE_HANDLE_T dev;
 
 	/* Check all the address */
 	for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) {
 		i2caddress = ir_i2c_addr[i];
-#if !CONFIG_IS_ENABLED(DM_I2C)
-		ret = i2c_read(i2caddress,
-			       IR36021_MFR_ID_OFFSET, 1, (void *)&byte,
-			       sizeof(byte));
-#else
-		ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
-		if (!ret)
-			ret = dm_i2c_read(dev, IR36021_MFR_ID_OFFSET,
-					  (void *)&byte, sizeof(byte));
-#endif
-		if ((ret >= 0) && (byte == IR36021_MFR_ID))
-			return i2caddress;
+		ret = vid_get_device(i2caddress, &dev);
+		if (!ret) {
+			ret = I2C_READ(dev, IR36021_MFR_ID_OFFSET,
+				       (void *)&mfrID, sizeof(mfrID));
+			/* If manufacturer ID matches the IR36021 */
+			if (!ret && mfrID == IR36021_MFR_ID)
+				return i2caddress;
+		}
 	}
 	return -1;
 }
@@ -117,35 +199,33 @@ static int read_voltage_from_INA220(int i2caddress)
 	int i, ret, voltage_read = 0;
 	u16 vol_mon;
 	u8 buf[2];
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *dev;
-#endif
+	DEVICE_HANDLE_T dev;
+
+	/* Open device handle */
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < NUM_READINGS; i++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
-		ret = i2c_read(I2C_VOL_MONITOR_ADDR,
-			       I2C_VOL_MONITOR_BUS_V_OFFSET, 1,
-			       (void *)&buf, 2);
-#else
-		ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
-		if (!ret)
-			ret = dm_i2c_read(dev, I2C_VOL_MONITOR_BUS_V_OFFSET,
-					  (void *)&buf, 2);
-#endif
+		ret = I2C_READ(dev, I2C_VOL_MONITOR_BUS_V_OFFSET,
+			       (void *)&buf[0], sizeof(buf));
 		if (ret) {
 			printf("VID: failed to read core voltage\n");
 			return ret;
 		}
+
 		vol_mon = (buf[0] << 8) | buf[1];
 		if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
 			printf("VID: Core voltage sensor error\n");
 			return -1;
 		}
+
 		debug("VID: bus voltage reads 0x%04x\n", vol_mon);
 		/* LSB = 4mv */
 		voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
 		udelay(WAIT_FOR_ADC);
 	}
+
 	/* calculate the average */
 	voltage_read /= NUM_READINGS;
 
@@ -153,30 +233,25 @@ static int read_voltage_from_INA220(int i2caddress)
 }
 #endif
 
-/* read voltage from IR */
 #ifdef CONFIG_VOL_MONITOR_IR36021_READ
+/* read voltage from IR */
 static int read_voltage_from_IR(int i2caddress)
 {
 	int i, ret, voltage_read = 0;
 	u16 vol_mon;
 	u8 buf;
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *dev;
-#endif
+	DEVICE_HANDLE_T dev;
+
+	/* Open device handle */
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < NUM_READINGS; i++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
-		ret = i2c_read(i2caddress,
-			       IR36021_LOOP1_VOUT_OFFSET,
-			       1, (void *)&buf, 1);
-#else
-		ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
-		if (!ret)
-			ret = dm_i2c_read(dev, IR36021_LOOP1_VOUT_OFFSET,
-					  (void *)&buf, 1);
-#endif
+		ret = I2C_READ(dev, IR36021_LOOP1_VOUT_OFFSET, (void *)&buf,
+			       sizeof(buf));
 		if (ret) {
-			printf("VID: failed to read vcpu\n");
+			printf("VID: failed to read core voltage\n");
 			return ret;
 		}
 		vol_mon = buf;
@@ -188,7 +263,7 @@ static int read_voltage_from_IR(int i2caddress)
 		/* Resolution is 1/128V. We scale up here to get 1/128mV
 		 * and divide at the end
 		 */
-		voltage_read += vol_mon * 1000;
+		voltage_read += vol_mon * MV_PER_V;
 		udelay(WAIT_FOR_ADC);
 	}
 	/* Scale down to the real mV as IR resolution is 1/128V, rounding up */
@@ -206,49 +281,94 @@ static int read_voltage_from_IR(int i2caddress)
 }
 #endif
 
-#ifdef CONFIG_VOL_MONITOR_LTC3882_READ
-/* read the current value of the LTC Regulator Voltage */
-static int read_voltage_from_LTC(int i2caddress)
-{
-	int  ret, vcode = 0;
-	u8 chan = PWM_CHANNEL0;
+#if defined(CONFIG_VOL_MONITOR_ISL68233_READ) || \
+	defined(CONFIG_VOL_MONITOR_LTC3882_READ) || \
+	defined(CONFIG_VOL_MONITOR_ISL68233_SET) || \
+	defined(CONFIG_VOL_MONITOR_LTC3882_SET)
 
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	/* select the PAGE 0 using PMBus commands PAGE for VDD*/
-	ret = i2c_write(I2C_VOL_MONITOR_ADDR,
-			PMBUS_CMD_PAGE, 1, &chan, 1);
-#else
-	struct udevice *dev;
+/*
+ * The message displayed if the VOUT exponent causes a resolution
+ * worse than 1.0 V (if exponent is >= 0).
+ */
+#define VOUT_WARNING "VID: VOUT_MODE exponent has resolution worse than 1 V!\n"
 
-	ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE, &chan, 1);
-#endif
+/* Checks the PMBus voltage monitor for the format used for voltage values */
+static int get_pmbus_multiplier(DEVICE_HANDLE_T dev)
+{
+	u8 mode;
+	int exponent, multiplier, ret;
+
+	ret = I2C_READ(dev, PMBUS_CMD_VOUT_MODE, &mode, sizeof(mode));
 	if (ret) {
-		printf("VID: failed to select VDD Page 0\n");
+		printf("VID: unable to determine voltage multiplier\n");
+		return 1;
+	}
+
+	/* Upper 3 bits is mode, lower 5 bits is exponent */
+	exponent = (int)mode & 0x1F;
+	mode >>= 5;
+	switch (mode) {
+	case 0:
+		/* Linear, 5 bit twos component exponent */
+		if (exponent & 0x10) {
+			multiplier = 1 << (16 - (exponent & 0xF));
+		} else {
+			/* If exponent is >= 0, then resolution is 1 V! */
+			printf(VOUT_WARNING);
+			multiplier = 1;
+		}
+		break;
+	case 1:
+		/* VID code identifier */
+		printf("VID: custom VID codes are not supported\n");
+		multiplier = MV_PER_V;
+		break;
+	default:
+		/* Direct, in mV */
+		multiplier = MV_PER_V;
+		break;
+	}
+
+	debug("VID: calculated multiplier is %d\n", multiplier);
+	return multiplier;
+}
+#endif
+
+#if defined(CONFIG_VOL_MONITOR_ISL68233_READ) || \
+	defined(CONFIG_VOL_MONITOR_LTC3882_READ)
+static int read_voltage_from_pmbus(int i2caddress)
+{
+	int ret, multiplier, vout;
+	u8 channel = PWM_CHANNEL0;
+	u16 vcode;
+	DEVICE_HANDLE_T dev;
+
+	/* Open device handle */
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
 		return ret;
-	}
 
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	/*read the output voltage using PMBus command READ_VOUT*/
-	ret = i2c_read(I2C_VOL_MONITOR_ADDR,
-		       PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2);
-#else
-	ret = dm_i2c_read(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, 2);
+	/* Select the right page */
+	ret = I2C_WRITE(dev, PMBUS_CMD_PAGE, &channel, sizeof(channel));
 	if (ret) {
-		printf("VID: failed to read the volatge\n");
+		printf("VID: failed to select VDD page %d\n", channel);
 		return ret;
 	}
-#endif
+
+	/* VOUT is little endian */
+	ret = I2C_READ(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, sizeof(vcode));
 	if (ret) {
-		printf("VID: failed to read the volatge\n");
+		printf("VID: failed to read core voltage\n");
 		return ret;
 	}
 
-	/* Scale down to the real mV as LTC resolution is 1/4096V,rounding up */
-	vcode = DIV_ROUND_UP(vcode * 1000, 4096);
-
-	return vcode;
+	/* Scale down to the real mV */
+	multiplier = get_pmbus_multiplier(dev);
+	vout = (int)vcode;
+	/* Multiplier 1000 (direct mode) requires no change to convert */
+	if (multiplier != MV_PER_V)
+		vout = DIV_ROUND_UP(vout * MV_PER_V, multiplier);
+	return vout - board_vdd_drop_compensation();
 }
 #endif
 
@@ -256,13 +376,14 @@ static int read_voltage(int i2caddress)
 {
 	int voltage_read;
 #ifdef CONFIG_VOL_MONITOR_INA220
-	voltage_read = read_voltage_from_INA220(i2caddress);
+	voltage_read = read_voltage_from_INA220(I2C_VOL_MONITOR_ADDR);
 #elif defined CONFIG_VOL_MONITOR_IR36021_READ
 	voltage_read = read_voltage_from_IR(i2caddress);
-#elif defined CONFIG_VOL_MONITOR_LTC3882_READ
-	voltage_read = read_voltage_from_LTC(i2caddress);
+#elif defined(CONFIG_VOL_MONITOR_ISL68233_READ) || \
+	  defined(CONFIG_VOL_MONITOR_LTC3882_READ)
+	voltage_read = read_voltage_from_pmbus(i2caddress);
 #else
-	return -1;
+	voltage_read = -1;
 #endif
 	return voltage_read;
 }
@@ -300,7 +421,7 @@ static int wait_for_new_voltage(int vdd, int i2caddress)
 }
 
 /*
- * this function keeps reading the voltage until it is stable or until the
+ * Blocks and reads the VID voltage until it stabilizes, or the
  * timeout expires
  */
 static int wait_for_voltage_stable(int i2caddress)
@@ -310,9 +431,9 @@ static int wait_for_voltage_stable(int i2caddress)
 	vdd = read_voltage(i2caddress);
 	udelay(NUM_READINGS * WAIT_FOR_ADC);
 
-	/* wait until voltage is stable */
 	vdd_current = read_voltage(i2caddress);
-	/* The maximum timeout is
+	/*
+	 * The maximum timeout is
 	 * MAX_LOOP_WAIT_VOL_STABLE * NUM_READINGS * WAIT_FOR_ADC
 	 */
 	for (timeout = MAX_LOOP_WAIT_VOL_STABLE;
@@ -327,12 +448,18 @@ static int wait_for_voltage_stable(int i2caddress)
 	return vdd_current;
 }
 
-/* Set the voltage to the IR chip */
+/* Sets the VID voltage using the IR36021 */
 static int set_voltage_to_IR(int i2caddress, int vdd)
 {
 	int wait, vdd_last;
 	int ret;
 	u8 vid;
+	DEVICE_HANDLE_T dev;
+
+	/* Open device handle */
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
+		return ret;
 
 	/* Compensate for a board specific voltage drop between regulator and
 	 * SoC before converting into an IR VID value
@@ -344,20 +471,10 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
 	vid = DIV_ROUND_UP(vdd - 245, 5);
 #endif
 
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET,
-			1, (void *)&vid, sizeof(vid));
-#else
-	struct udevice *dev;
-
-	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_write(dev, IR36021_LOOP1_MANUAL_ID_OFFSET,
-				   (void *)&vid, sizeof(vid));
-
-#endif
+	ret = I2C_WRITE(dev, IR36021_LOOP1_MANUAL_ID_OFFSET, (void *)&vid,
+			sizeof(vid));
 	if (ret) {
-		printf("VID: failed to write VID\n");
+		printf("VID: failed to write new voltage\n");
 		return -1;
 	}
 	wait = wait_for_new_voltage(vdd, i2caddress);
@@ -371,81 +488,59 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
 	debug("VID: Current voltage is %d mV\n", vdd_last);
 	return vdd_last;
 }
-
 #endif
 
-#ifdef CONFIG_VOL_MONITOR_LTC3882_SET
-/* this function sets the VDD and returns the value set */
-static int set_voltage_to_LTC(int i2caddress, int vdd)
+#if defined(CONFIG_VOL_MONITOR_ISL68233_SET) || \
+	defined(CONFIG_VOL_MONITOR_LTC3882_SET)
+static int set_voltage_to_pmbus(int i2caddress, int vdd)
 {
 	int ret, vdd_last, vdd_target = vdd;
-	int count = 100, temp = 0;
+	int count = MAX_LOOP_WAIT_NEW_VOL, temp = 0, multiplier;
 	unsigned char value;
 
-	/* Scale up to the LTC resolution is 1/4096V */
-	vdd = (vdd * 4096) / 1000;
+	/* The data to be sent with the PMBus command PAGE_PLUS_WRITE */
+	u8 buffer[5] = { 0x04, PWM_CHANNEL0, PMBUS_CMD_VOUT_COMMAND, 0, 0 };
+	DEVICE_HANDLE_T dev;
 
-	/* 5-byte buffer which needs to be sent following the
-	 * PMBus command PAGE_PLUS_WRITE.
-	 */
-	u8 buff[5] = {0x04, PWM_CHANNEL0, PMBUS_CMD_VOUT_COMMAND,
-			vdd & 0xFF, (vdd & 0xFF00) >> 8};
+	/* Open device handle */
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
+		return ret;
+
+	/* Scale up to the proper value for the VOUT command, little endian */
+	multiplier = get_pmbus_multiplier(dev);
+	vdd += board_vdd_drop_compensation();
+	if (multiplier != MV_PER_V)
+		vdd = DIV_ROUND_UP(vdd * multiplier, MV_PER_V);
+	buffer[3] = vdd & 0xFF;
+	buffer[4] = (vdd & 0xFF00) >> 8;
 
-	/* Write the desired voltage code to the regulator */
-#if !CONFIG_IS_ENABLED(DM_I2C)
 	/* Check write protect state */
-	ret = i2c_read(I2C_VOL_MONITOR_ADDR,
-		       PMBUS_CMD_WRITE_PROTECT, 1,
-		       (void *)&value, sizeof(value));
+	ret = I2C_READ(dev, PMBUS_CMD_WRITE_PROTECT, (void *)&value,
+		       sizeof(value));
 	if (ret)
 		goto exit;
 
 	if (value != EN_WRITE_ALL_CMD) {
 		value = EN_WRITE_ALL_CMD;
-		ret = i2c_write(I2C_VOL_MONITOR_ADDR,
-				PMBUS_CMD_WRITE_PROTECT, 1,
+		ret = I2C_WRITE(dev, PMBUS_CMD_WRITE_PROTECT,
 				(void *)&value, sizeof(value));
 		if (ret)
 			goto exit;
 	}
 
-	ret = i2c_write(I2C_VOL_MONITOR_ADDR,
-			PMBUS_CMD_PAGE_PLUS_WRITE, 1,
-			(void *)&buff, sizeof(buff));
-#else
-	struct udevice *dev;
-
-	ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
-	if (!ret) {
-		/* Check write protect state */
-		ret = dm_i2c_read(dev,
-				  PMBUS_CMD_WRITE_PROTECT,
-				  (void *)&value, sizeof(value));
-		if (ret)
-			goto exit;
-
-		if (value != EN_WRITE_ALL_CMD) {
-			value = EN_WRITE_ALL_CMD;
-			ret = dm_i2c_write(dev,
-					   PMBUS_CMD_WRITE_PROTECT,
-					   (void *)&value, sizeof(value));
-			if (ret)
-				goto exit;
-		}
-
-		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE_PLUS_WRITE,
-				   (void *)&buff, sizeof(buff));
-	}
-#endif
-exit:
+	/* Write the desired voltage code to the regulator */
+	ret = I2C_WRITE(dev, PMBUS_CMD_PAGE_PLUS_WRITE, (void *)&buffer[0],
+			sizeof(buffer));
 	if (ret) {
-		printf("VID: I2C failed to write to the volatge regulator\n");
+		printf("VID: I2C failed to write to the voltage regulator\n");
 		return -1;
 	}
 
-	/* Wait for the volatge to get to the desired value */
+exit:
+	/* Wait for the voltage to get to the desired value */
 	do {
-		vdd_last = read_voltage_from_LTC(i2caddress);
+		vdd_last = read_voltage_from_pmbus(i2caddress);
 		if (vdd_last < 0) {
 			printf("VID: Couldn't read sensor abort VID adjust\n");
 			return -1;
@@ -464,325 +559,80 @@ static int set_voltage(int i2caddress, int vdd)
 
 #ifdef CONFIG_VOL_MONITOR_IR36021_SET
 	vdd_last = set_voltage_to_IR(i2caddress, vdd);
-#elif defined CONFIG_VOL_MONITOR_LTC3882_SET
-	vdd_last = set_voltage_to_LTC(i2caddress, vdd);
+#elif defined(CONFIG_VOL_MONITOR_ISL68233_SET) || \
+	  defined(CONFIG_VOL_MONITOR_LTC3882_SET)
+	vdd_last = set_voltage_to_pmbus(i2caddress, vdd);
 #else
 	#error Specific voltage monitor must be defined
 #endif
 	return vdd_last;
 }
 
-#ifdef CONFIG_FSL_LSCH3
 int adjust_vdd(ulong vdd_override)
 {
 	int re_enable = disable_interrupts();
+#if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3)
 	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-	u32 fusesr;
-#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
-	defined(CONFIG_VOL_MONITOR_IR36021_READ)
-	u8 vid, buf;
 #else
-	u8 vid;
+	ccsr_gur_t __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
-	int vdd_target, vdd_current, vdd_last;
-	int ret, i2caddress = 0;
+	u8 vid;
+	u32 fusesr;
+	int vdd_current, vdd_last, vdd_target;
+	int ret, i2caddress = I2C_VOL_MONITOR_ADDR;
 	unsigned long vdd_string_override;
 	char *vdd_string;
-#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
-	static const u16 vdd[32] = {
-		8250,
-		7875,
-		7750,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		8000,
-		8125,
-		8250,
-		0,      /* reserved */
-		8500,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-	};
-#else
-#ifdef CONFIG_ARCH_LS1088A
-	static const uint16_t vdd[32] = {
-		10250,
-		9875,
-		9750,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		9000,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		10000,  /* 1.0000V */
-		10125,
-		10250,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-	};
 
-#else
-	static const uint16_t vdd[32] = {
-		10500,
-		0,      /* reserved */
-		9750,
-		0,      /* reserved */
-		9500,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		9000,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		10000,  /* 1.0000V */
-		0,      /* reserved */
-		10250,
-		0,      /* reserved */
-		10500,
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-		0,      /* reserved */
-	};
-#endif
-#endif
-	struct vdd_drive {
-		u8 vid;
-		unsigned voltage;
-	};
-
-	ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
-	if (ret) {
-		debug("VID: I2C failed to switch channel\n");
-		ret = -1;
-		goto exit;
-	}
 #if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
 	defined(CONFIG_VOL_MONITOR_IR36021_READ)
-	ret = find_ir_chip_on_i2c();
-	if (ret < 0) {
-		printf("VID: Could not find voltage regulator on I2C.\n");
-		ret = -1;
-		goto exit;
-	} else {
-		i2caddress = ret;
-		debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
-	}
-
-	/* check IR chip work on Intel mode*/
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_read(i2caddress,
-		       IR36021_INTEL_MODE_OOFSET,
-		       1, (void *)&buf, 1);
-#else
-	struct udevice *dev;
-
-	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_read(dev, IR36021_INTEL_MODE_OOFSET,
-				  (void *)&buf, 1);
-#endif
-	if (ret) {
-		printf("VID: failed to read IR chip mode.\n");
-		ret = -1;
-		goto exit;
-	}
-
-	if ((buf & IR36021_MODE_MASK) != IR36021_INTEL_MODE) {
-		printf("VID: IR Chip is not used in Intel mode.\n");
-		ret = -1;
-		goto exit;
-	}
+	u8 buf;
+	DEVICE_HANDLE_T dev;
 #endif
 
-	/* get the voltage ID from fuse status register */
+	/*
+	 * VID is used according to the table below
+	 *                ---------------------------------------
+	 *                |                DA_V                 |
+	 *                |-------------------------------------|
+	 *                | 5b00000 | 5b00001-5b11110 | 5b11111 |
+	 * ---------------+---------+-----------------+---------|
+	 * | D | 5b00000  | NO VID  | VID = DA_V      | NO VID  |
+	 * | A |----------+---------+-----------------+---------|
+	 * | _ | 5b00001  |VID =    | VID =           |VID =    |
+	 * | V |   ~      | DA_V_ALT|   DA_V_ALT      | DA_A_VLT|
+	 * | _ | 5b11110  |         |                 |         |
+	 * | A |----------+---------+-----------------+---------|
+	 * | L | 5b11111  | No VID  | VID = DA_V      | NO VID  |
+	 * | T |          |         |                 |         |
+	 * ------------------------------------------------------
+	 */
+#if defined(CONFIG_FSL_LSCH3)
 	fusesr = in_le32(&gur->dcfg_fusesr);
 	vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
-		FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
-	if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
+	       FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
+	if (vid == 0 || vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK) {
 		vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
-			FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
-	}
-	vdd_target = vdd[vid];
-
-	/* check override variable for overriding VDD */
-	vdd_string = env_get(CONFIG_VID_FLS_ENV);
-	if (vdd_override == 0 && vdd_string &&
-	    !strict_strtoul(vdd_string, 10, &vdd_string_override))
-		vdd_override = vdd_string_override;
-
-	if (vdd_override >= VDD_MV_MIN && vdd_override <= VDD_MV_MAX) {
-		vdd_target = vdd_override * 10; /* convert to 1/10 mV */
-		debug("VDD override is %lu\n", vdd_override);
-	} else if (vdd_override != 0) {
-		printf("Invalid value.\n");
+		       FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
 	}
-
-	/* divide and round up by 10 to get a value in mV */
-	vdd_target = DIV_ROUND_UP(vdd_target, 10);
-	if (vdd_target == 0) {
-		debug("VID: VID not used\n");
-		ret = 0;
-		goto exit;
-	} else if (vdd_target < VDD_MV_MIN || vdd_target > VDD_MV_MAX) {
-		/* Check vdd_target is in valid range */
-		printf("VID: Target VID %d mV is not in range.\n",
-		       vdd_target);
-		ret = -1;
-		goto exit;
-	} else {
-		debug("VID: vid = %d mV\n", vdd_target);
-	}
-
-	/*
-	 * Read voltage monitor to check real voltage.
-	 */
-	vdd_last = read_voltage(i2caddress);
-	if (vdd_last < 0) {
-		printf("VID: Couldn't read sensor abort VID adjustment\n");
-		ret = -1;
-		goto exit;
+#elif defined(CONFIG_FSL_LSCH2)
+	fusesr = in_be32(&gur->dcfg_fusesr);
+	vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
+	       FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
+	if (vid == 0 || vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK) {
+		vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
+		       FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
 	}
-	vdd_current = vdd_last;
-	debug("VID: Core voltage is currently at %d mV\n", vdd_last);
-
-#ifdef CONFIG_VOL_MONITOR_LTC3882_SET
-	/* Set the target voltage */
-	vdd_last = vdd_current = set_voltage(i2caddress, vdd_target);
 #else
-	/*
-	  * Adjust voltage to at or one step above target.
-	  * As measurements are less precise than setting the values
-	  * we may run through dummy steps that cancel each other
-	  * when stepping up and then down.
-	  */
-	while (vdd_last > 0 &&
-	       vdd_last < vdd_target) {
-		vdd_current += IR_VDD_STEP_UP;
-		vdd_last = set_voltage(i2caddress, vdd_current);
-	}
-	while (vdd_last > 0 &&
-	       vdd_last > vdd_target + (IR_VDD_STEP_DOWN - 1)) {
-		vdd_current -= IR_VDD_STEP_DOWN;
-		vdd_last = set_voltage(i2caddress, vdd_current);
+	fusesr = in_be32(&gur->dcfg_fusesr);
+	vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+	       FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+	if (vid == 0 || vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK) {
+		vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+		       FSL_CORENET_DCFG_FUSESR_VID_MASK;
 	}
-
 #endif
-	if (board_adjust_vdd(vdd_target) < 0) {
-		ret = -1;
-		goto exit;
-	}
-
-	if (vdd_last > 0)
-		printf("VID: Core voltage after adjustment is at %d mV\n",
-		       vdd_last);
-	else
-		ret = -1;
-exit:
-	if (re_enable)
-		enable_interrupts();
-	i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT);
-	return ret;
-}
-#else /* !CONFIG_FSL_LSCH3 */
-int adjust_vdd(ulong vdd_override)
-{
-	int re_enable = disable_interrupts();
-#if defined(CONFIG_FSL_LSCH2)
-	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-#else
-	ccsr_gur_t __iomem *gur =
-		(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-	u32 fusesr;
-	u8 vid, buf;
-	int vdd_target, vdd_current, vdd_last;
-	int ret, i2caddress;
-	unsigned long vdd_string_override;
-	char *vdd_string;
-	static const uint16_t vdd[32] = {
-		0,      /* unused */
-		9875,   /* 0.9875V */
-		9750,
-		9625,
-		9500,
-		9375,
-		9250,
-		9125,
-		9000,
-		8875,
-		8750,
-		8625,
-		8500,
-		8375,
-		8250,
-		8125,
-		10000,  /* 1.0000V */
-		10125,
-		10250,
-		10375,
-		10500,
-		10625,
-		10750,
-		10875,
-		11000,
-		0,      /* reserved */
-	};
-	struct vdd_drive {
-		u8 vid;
-		unsigned voltage;
-	};
+	vdd_target = soc_get_fuse_vid((int)vid);
 
 	ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
 	if (ret) {
@@ -790,6 +640,7 @@ int adjust_vdd(ulong vdd_override)
 		ret = -1;
 		goto exit;
 	}
+
 #if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
 	defined(CONFIG_VOL_MONITOR_IR36021_READ)
 	ret = find_ir_chip_on_i2c();
@@ -802,19 +653,13 @@ int adjust_vdd(ulong vdd_override)
 		debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
 	}
 
-	/* check IR chip work on Intel mode*/
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_read(i2caddress,
-		       IR36021_INTEL_MODE_OOFSET,
-		       1, (void *)&buf, 1);
-#else
-	struct udevice *dev;
+	ret = vid_get_device(i2caddress, &dev);
+	if (ret)
+		return ret;
 
-	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_read(dev, IR36021_INTEL_MODE_OOFSET,
-				  (void *)&buf, 1);
-#endif
+	/* check IR chip work on Intel mode */
+	ret = I2C_READ(dev, IR36021_INTEL_MODE_OFFSET, (void *)&buf,
+		       sizeof(buf));
 	if (ret) {
 		printf("VID: failed to read IR chip mode.\n");
 		ret = -1;
@@ -827,52 +672,18 @@ int adjust_vdd(ulong vdd_override)
 	}
 #endif
 
-	/* get the voltage ID from fuse status register */
-	fusesr = in_be32(&gur->dcfg_fusesr);
-	/*
-	 * VID is used according to the table below
-	 *                ---------------------------------------
-	 *                |                DA_V                 |
-	 *                |-------------------------------------|
-	 *                | 5b00000 | 5b00001-5b11110 | 5b11111 |
-	 * ---------------+---------+-----------------+---------|
-	 * | D | 5b00000  | NO VID  | VID = DA_V      | NO VID  |
-	 * | A |----------+---------+-----------------+---------|
-	 * | _ | 5b00001  |VID =    | VID =           |VID =    |
-	 * | V |   ~      | DA_V_ALT|   DA_V_ALT      | DA_A_VLT|
-	 * | _ | 5b11110  |         |                 |         |
-	 * | A |----------+---------+-----------------+---------|
-	 * | L | 5b11111  | No VID  | VID = DA_V      | NO VID  |
-	 * | T |          |         |                 |         |
-	 * ------------------------------------------------------
-	 */
-#ifdef CONFIG_FSL_LSCH2
-	vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
-		FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
-	if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) {
-		vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
-			FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
-	}
-#else
-	vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
-		FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
-	if ((vid == 0) || (vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK)) {
-		vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
-			FSL_CORENET_DCFG_FUSESR_VID_MASK;
-	}
-#endif
-	vdd_target = vdd[vid];
-
 	/* check override variable for overriding VDD */
 	vdd_string = env_get(CONFIG_VID_FLS_ENV);
+	debug("VID: Initial VDD value is %d mV\n",
+	      DIV_ROUND_UP(vdd_target, 10));
 	if (vdd_override == 0 && vdd_string &&
 	    !strict_strtoul(vdd_string, 10, &vdd_string_override))
 		vdd_override = vdd_string_override;
 	if (vdd_override >= VDD_MV_MIN && vdd_override <= VDD_MV_MAX) {
 		vdd_target = vdd_override * 10; /* convert to 1/10 mV */
-		debug("VDD override is %lu\n", vdd_override);
+		debug("VID: VDD override is %lu\n", vdd_override);
 	} else if (vdd_override != 0) {
-		printf("Invalid value.\n");
+		printf("VID: Invalid VDD value.\n");
 	}
 	if (vdd_target == 0) {
 		debug("VID: VID not used\n");
@@ -895,6 +706,13 @@ int adjust_vdd(ulong vdd_override)
 	}
 	vdd_current = vdd_last;
 	debug("VID: Core voltage is currently at %d mV\n", vdd_last);
+
+#if defined(CONFIG_VOL_MONITOR_LTC3882_SET) || \
+	defined(CONFIG_VOL_MONITOR_ISL68233_SET)
+	/* Set the target voltage */
+	vdd_current = set_voltage(i2caddress, vdd_target);
+	vdd_last = vdd_current;
+#else
 	/*
 	  * Adjust voltage to at or one step above target.
 	  * As measurements are less precise than setting the values
@@ -911,6 +729,13 @@ int adjust_vdd(ulong vdd_override)
 		vdd_current -= IR_VDD_STEP_DOWN;
 		vdd_last = set_voltage(i2caddress, vdd_current);
 	}
+#endif
+
+	/* Board specific adjustments */
+	if (board_adjust_vdd(vdd_target) < 0) {
+		ret = -1;
+		goto exit;
+	}
 
 	if (vdd_last > 0)
 		printf("VID: Core voltage after adjustment is at %d mV\n",
@@ -925,11 +750,10 @@ exit:
 
 	return ret;
 }
-#endif
 
 static int print_vdd(void)
 {
-	int vdd_last, ret, i2caddress = 0;
+	int vdd_last, ret, i2caddress = I2C_VOL_MONITOR_ADDR;
 
 	ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
 	if (ret) {
diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h
index 5bbaecace4..b34c080b4b 100644
--- a/board/freescale/common/vid.h
+++ b/board/freescale/common/vid.h
@@ -7,16 +7,17 @@
 #ifndef __VID_H_
 #define __VID_H_
 
+/* IR36021 command codes */
 #define IR36021_LOOP1_MANUAL_ID_OFFSET	0x6A
 #define IR36021_LOOP1_VOUT_OFFSET	0x9A
 #define IR36021_MFR_ID_OFFSET		0x92
 #define IR36021_MFR_ID			0x43
-#define IR36021_INTEL_MODE_OOFSET	0x14
+#define IR36021_INTEL_MODE_OFFSET	0x14
 #define IR36021_MODE_MASK		0x20
 #define IR36021_INTEL_MODE		0x00
 #define IR36021_AMD_MODE		0x20
 
-/* step the IR regulator in 5mV increments */
+/* Step the IR regulator in 5mV increments */
 #define IR_VDD_STEP_DOWN		5
 #define IR_VDD_STEP_UP			5
 
@@ -50,15 +51,16 @@
 #define VDD_MV_MAX			925
 #endif
 
-#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
-defined(CONFIG_TARGET_LX2160ARDB)
 /* PM Bus commands code for LTC3882*/
 #define PWM_CHANNEL0                    0x0
 #define PMBUS_CMD_PAGE                  0x0
 #define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_VOUT_MODE			0x20
 #define PMBUS_CMD_VOUT_COMMAND          0x21
 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
+defined(CONFIG_TARGET_LX2160ARDB)
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
 #define I2C_VOL_MONITOR_BUS_V_OVF	0x1
@@ -68,5 +70,6 @@ defined(CONFIG_TARGET_LX2160ARDB)
 #endif
 
 int adjust_vdd(ulong vdd_override);
+u16 soc_get_fuse_vid(int vid_index);
 
 #endif  /* __VID_H_ */
diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS
index e22cf703b7..f0da86a34c 100644
--- a/board/freescale/corenet_ds/MAINTAINERS
+++ b/board/freescale/corenet_ds/MAINTAINERS
@@ -19,9 +19,3 @@ F:	configs/P5040DS_NAND_defconfig
 F:	configs/P5040DS_SDCARD_defconfig
 F:	configs/P5040DS_SPIFLASH_defconfig
 F:	configs/P5040DS_SECURE_BOOT_defconfig
-
-CORENET_DS_SECURE_BOOT BOARD
-M:	Ruchika Gupta <ruchika.gupta@nxp.com>
-S:	Maintained
-F:	configs/P3041DS_NAND_SECURE_BOOT_defconfig
-F:	configs/P5040DS_NAND_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS
index 480b6bb325..5fc7e93850 100644
--- a/board/freescale/ls1012afrdm/MAINTAINERS
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -1,5 +1,4 @@
 LS1012AFRDM BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:	Maintained
 F:	board/freescale/ls1012afrdm/
@@ -10,12 +9,9 @@ F:	configs/ls1012afrwy_tfa_defconfig
 F:	configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
 
 LS1012AFRWY BOARD
-M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+M:	Pramod Kumar <pramod.kumar_1@nxp.com>
 S:      Maintained
 F:      board/freescale/ls1012afrwy/
 F:      include/configs/ls1012afrwy.h
 F:      configs/ls1012afrwy_qspi_defconfig
-
-M:	Vinitha V Pillai <vinitha.pillai@nxp.com>
-S:	Maintained
 F:	configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS
index dbd4670c3b..c1bb8d5150 100644
--- a/board/freescale/ls1012aqds/MAINTAINERS
+++ b/board/freescale/ls1012aqds/MAINTAINERS
@@ -1,6 +1,6 @@
 LS1012AQDS BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
+M:	Pramod Kumar <pramod.kumar_1@nxp.com>
 S:	Maintained
 F:	board/freescale/ls1012aqds/
 F:	include/configs/ls1012aqds.h
diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS
index 60e184d10f..b0c008b5fc 100644
--- a/board/freescale/ls1012ardb/MAINTAINERS
+++ b/board/freescale/ls1012ardb/MAINTAINERS
@@ -1,6 +1,6 @@
 LS1012ARDB BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
+M:	Pramod Kumar <pramod.kumar_1@nxp.com>
 S:	Maintained
 F:	board/freescale/ls1012ardb/
 F:	include/configs/ls1012ardb.h
@@ -8,13 +8,10 @@ F:	configs/ls1012ardb_qspi_defconfig
 F:	configs/ls1012ardb_tfa_defconfig
 F:	configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
 F:	configs/ls1012a2g5rdb_tfa_defconfig
-
-M:	Sumit Garg <sumit.garg@nxp.com>
-S:	Maintained
 F:	configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
 
 LS1012A2G5RDB BOARD
-M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+M:	Pramod Kumar <pramod.kumar_1@nxp.com>
 S:      Maintained
 F:      board/freescale/ls1012ardb/
 F:      include/configs/ls1012a2g5rdb.h
diff --git a/board/freescale/ls1021aiot/MAINTAINERS b/board/freescale/ls1021aiot/MAINTAINERS
index 2dab7988ee..65f21bee34 100644
--- a/board/freescale/ls1021aiot/MAINTAINERS
+++ b/board/freescale/ls1021aiot/MAINTAINERS
@@ -1,5 +1,5 @@
 LS1021AIOT BOARD
-M:	Feng Li <feng.li_2@nxp.com>
+M:	Alison Wang <alison.wang@nxp.com>
 S:	Maintained
 F:	board/freescale/ls1021aiot/
 F:	include/configs/ls1021aiot.h
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index c8b93c6469..7ab8347e9e 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -9,7 +9,4 @@ F:	configs/ls1021atwr_nor_lpuart_defconfig
 F:	configs/ls1021atwr_sdcard_ifc_defconfig
 F:	configs/ls1021atwr_sdcard_qspi_defconfig
 F:	configs/ls1021atwr_qspi_defconfig
-
-M:	Sumit Garg <sumit.garg@nxp.com>
-S:	Maintained
 F:	configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS
index 5b7a8db2fa..9e7b0697ff 100644
--- a/board/freescale/ls1028a/MAINTAINERS
+++ b/board/freescale/ls1028a/MAINTAINERS
@@ -1,6 +1,4 @@
 LS1028AQDS BOARD
-M:	Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
-M:	Rai Harninder <harninder.rai@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 M:	Tang Yuantian <andy.tang@nxp.com>
 S:	Maintained
@@ -11,8 +9,6 @@ F:	configs/ls1028aqds_tfa_defconfig
 F:	configs/ls1028aqds_tfa_lpuart_defconfig
 
 LS1028ARDB BOARD
-M:	Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
-M:	Rai Harninder <harninder.rai@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 M:	Tang Yuantian <andy.tang@nxp.com>
 S:	Maintained
diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS
index ed62396760..36e7331538 100644
--- a/board/freescale/ls1043ardb/MAINTAINERS
+++ b/board/freescale/ls1043ardb/MAINTAINERS
@@ -10,10 +10,6 @@ F:	configs/ls1043ardb_nand_defconfig
 F:	configs/ls1043ardb_sdcard_defconfig
 F:	configs/ls1043ardb_tfa_defconfig
 F:	configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
-
-LS1043A_SECURE_BOOT BOARD
-M:	Ruchika Gupta <ruchika.gupta@nxp.com>
-S:	Maintained
 F:	configs/ls1043ardb_SECURE_BOOT_defconfig
 F:	configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
 F:	configs/ls1043ardb_nand_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046aqds/MAINTAINERS b/board/freescale/ls1046aqds/MAINTAINERS
index 39a48da95a..72c4253fcf 100644
--- a/board/freescale/ls1046aqds/MAINTAINERS
+++ b/board/freescale/ls1046aqds/MAINTAINERS
@@ -12,7 +12,4 @@ F:	configs/ls1046aqds_qspi_defconfig
 F:	configs/ls1046aqds_lpuart_defconfig
 F:	configs/ls1046aqds_tfa_defconfig
 F:	configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
-
-M:	Sumit Garg <sumit.garg@nxp.com>
-S:	Maintained
 F:	configs/ls1046aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS
index 8b4b45e9ed..efdea22bde 100644
--- a/board/freescale/ls1046ardb/MAINTAINERS
+++ b/board/freescale/ls1046ardb/MAINTAINERS
@@ -11,13 +11,6 @@ F:	configs/ls1046ardb_sdcard_defconfig
 F:	configs/ls1046ardb_emmc_defconfig
 F:	configs/ls1046ardb_tfa_defconfig
 F:	configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
-
-LS1046A_SECURE_BOOT BOARD
-M:	Ruchika Gupta <ruchika.gupta@nxp.com>
-S:	Maintained
 F:	configs/ls1046ardb_SECURE_BOOT_defconfig
 F:	configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
-
-M:	Sumit Garg <sumit.garg@nxp.com>
-S:	Maintained
 F:	configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 98ecb88e3b..5c7925a95f 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -1,5 +1,4 @@
 LS1088ARDB BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Ashish Kumar <Ashish.Kumar@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:	Maintained
@@ -11,7 +10,6 @@ F:	configs/ls1088ardb_tfa_defconfig
 F:	configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
 
 LS1088AQDS BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Ashish Kumar <Ashish.Kumar@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:	Maintained
@@ -25,17 +23,15 @@ F:	configs/ls1088aqds_tfa_defconfig
 
 LS1088AQDS_QSPI_SECURE_BOOT BOARD
 M:	Udit Agarwal <udit.agarwal@nxp.com>
-M:	Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
 S:	Maintained
 F:	configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
 
 LS1088ARDB_QSPI_SECURE_BOOT BOARD
 M:	Udit Agarwal <udit.agarwal@nxp.com>
-M:	Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
 S:	Maintained
 F:	configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
 
 LS1088ARDB_SD_SECURE_BOOT BOARD
-M:	Sumit Garg <sumit.garg@nxp.com>
+M:	Udit Agarwal <udit.agarwal@nxp.com>
 S:	Maintained
 F:	configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index e76ea01914..f5dc449d89 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -186,6 +186,46 @@ int init_func_vid(void)
 
 	return 0;
 }
+
+u16 soc_get_fuse_vid(int vid_index)
+{
+	static const u16 vdd[32] = {
+		10250,
+		9875,
+		9750,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		9000,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		10000,  /* 1.0000V */
+		10125,
+		10250,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+	};
+
+	return vdd[vid_index];
+};
 #endif
 
 int is_pb_board(void)
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index e3d7635476..84735dce28 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
+M:	Priyanka Jain <priyanka.jain@nxp.com>
 M:	Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080aqds/
@@ -10,8 +10,4 @@ F:	configs/ls2080aqds_nand_defconfig
 F:	configs/ls2080aqds_qspi_defconfig
 F:	configs/ls2080aqds_sdcard_defconfig
 F:	configs/ls2088aqds_tfa_defconfig
-
-LS2080A_SECURE_BOOT BOARD
-#M:	Saksham Jain <saksham.jain@nxp.freescale.com>
-S:	Orphan (since 2018-05)
 F:	configs/ls2080aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 113b7ab3fd..6e25b82db5 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
+M:	Priyanka Jain <priyanka.jain@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080ardb/
 F:	board/freescale/ls2080a/ls2080ardb.c
@@ -21,8 +21,8 @@ S:	Maintained
 F:	configs/ls2081ardb_defconfig
 
 LS2080A_SECURE_BOOT BOARD
-#M:	Saksham Jain <saksham.jain@nxp.freescale.com>
-S:	Orphan (since 2018-05)
+M:	Udit Agarwal <udit.agarwal@nxp.com>
+S:	Maintained
 F:	configs/ls2080ardb_SECURE_BOOT_defconfig
 
 LS2088A_QSPI_SECURE_BOOT BOARD
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index c5ae02bc93..3a026b0827 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -43,6 +43,48 @@ enum {
 	MUX_TYPE_DSPI,
 };
 
+#ifdef CONFIG_VID
+u16 soc_get_fuse_vid(int vid_index)
+{
+	static const u16 vdd[32] = {
+		10500,
+		0,      /* reserved */
+		9750,
+		0,      /* reserved */
+		9500,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		9000,   /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		10000,  /* 1.0000V */
+		0,      /* reserved */
+		10250,
+		0,      /* reserved */
+		10500,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+	};
+
+	return vdd[vid_index];
+};
+#endif
+
 unsigned long long get_qixis_addr(void)
 {
 	unsigned long long addr;
diff --git a/board/freescale/lx2160a/MAINTAINERS b/board/freescale/lx2160a/MAINTAINERS
index c627417cf7..cc69de2970 100644
--- a/board/freescale/lx2160a/MAINTAINERS
+++ b/board/freescale/lx2160a/MAINTAINERS
@@ -16,7 +16,6 @@ F:	configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
 
 LX2160AQDS BOARD
 M:	Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
-M:	Pankaj Bansal <pankaj.bansal@nxp.com>
 S:	Maintained
 F:	board/freescale/lx2160a/eth_lx2160aqds.h
 F:	include/configs/lx2160aqds.h
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index b32e487e76..47a7024f33 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -649,6 +649,48 @@ int misc_init_r(void)
 }
 #endif
 
+#ifdef CONFIG_VID
+u16 soc_get_fuse_vid(int vid_index)
+{
+	static const u16 vdd[32] = {
+		8250,
+		7875,
+		7750,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		8000,
+		8125,
+		8250,
+		0,      /* reserved */
+		8500,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+	};
+
+	return vdd[vid_index];
+};
+#endif
+
 #ifdef CONFIG_FSL_MC_ENET
 extern int fdt_fixup_board_phy(void *fdt);
 
diff --git a/board/freescale/qemu-ppce500/MAINTAINERS b/board/freescale/qemu-ppce500/MAINTAINERS
deleted file mode 100644
index 77d0a4a13c..0000000000
--- a/board/freescale/qemu-ppce500/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-QEMU-PPCE500 BOARD
-M:	Alexander Graf <agraf@suse.de>
-S:	Maintained
-F:	board/freescale/qemu-ppce500/
-F:	include/configs/qemu-ppce500.h
-F:	configs/qemu-ppce500_defconfig
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 4defbd9cf9..eff238cb38 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -97,6 +97,13 @@ config CMD_ACPI
 	  between the firmware and OS, and is particularly useful when you
 	  want to make hardware changes without the OS needing to be adjusted.
 
+config CMD_ADDRMAP
+	bool "addrmap"
+	depends on ADDR_MAP
+	default y
+	help
+	  List non-identity virtual-physical memory mappings for 32-bit CPUs.
+
 config CMD_BDI
 	bool "bdinfo"
 	default y
@@ -1338,6 +1345,7 @@ config CMD_PVBLOCK
 config CMD_VIRTIO
 	bool "virtio"
 	depends on VIRTIO
+	depends on HAVE_BLOCK_DEVICE
 	default y if VIRTIO
 	help
 	  VirtIO block device support
diff --git a/cmd/Makefile b/cmd/Makefile
index 176bf925fd..567e2b79d2 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -13,6 +13,7 @@ obj-y += version.o
 
 # command
 obj-$(CONFIG_CMD_ACPI) += acpi.o
+obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
 obj-$(CONFIG_CMD_AES) += aes.o
 obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
 obj-$(CONFIG_CMD_ADC) += adc.o
diff --git a/cmd/addrmap.c b/cmd/addrmap.c
new file mode 100644
index 0000000000..bd23549f3a
--- /dev/null
+++ b/cmd/addrmap.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <addr_map.h>
+
+static int do_addrmap(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	int i;
+
+	printf("           vaddr            paddr             size\n");
+	printf("================ ================ ================\n");
+
+	for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++) {
+		if (address_map[i].size == 0)
+			continue;
+
+		printf("%16.8lx %16.8llx %16.8llx\n",
+		       address_map[i].vaddr,
+		       (unsigned long long)address_map[i].paddr,
+		       (unsigned long long)address_map[i].size);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	addrmap,	1,	1,	do_addrmap,
+	"List non-identity virtual-physical memory mappings for 32-bit CPUs",
+	""
+);
diff --git a/common/board_r.c b/common/board_r.c
index 9793439adf..c835ff8e26 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -626,6 +626,9 @@ static init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_DM
 	initr_dm,
 #endif
+#ifdef CONFIG_ADDR_MAP
+	initr_addr_map,
+#endif
 #if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || defined(CONFIG_RISCV) || \
 	defined(CONFIG_SANDBOX)
 	board_init,	/* Setup chipselects */
@@ -661,9 +664,6 @@ static init_fnc_t init_sequence_r[] = {
 	initr_manual_reloc_cmdtable,
 #endif
 	arch_initr_trap,
-#ifdef CONFIG_ADDR_MAP
-	initr_addr_map,
-#endif
 #if defined(CONFIG_BOARD_EARLY_INIT_R)
 	board_early_init_r,
 #endif
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 08d540bfc8..e624bbdf40 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -1668,22 +1668,36 @@ u64 fdt_get_base_address(const void *fdt, int node)
 }
 
 /*
- * Read a property of size <prop_len>. Currently only supports 1 or 2 cells.
+ * Read a property of size <prop_len>. Currently only supports 1 or 2 cells,
+ * or 3 cells specially for a PCI address.
  */
 static int fdt_read_prop(const fdt32_t *prop, int prop_len, int cell_off,
 			 uint64_t *val, int cells)
 {
-	const fdt32_t *prop32 = &prop[cell_off];
-	const unaligned_fdt64_t *prop64 = (const fdt64_t *)&prop[cell_off];
+	const fdt32_t *prop32;
+	const unaligned_fdt64_t *prop64;
 
 	if ((cell_off + cells) > prop_len)
 		return -FDT_ERR_NOSPACE;
 
+	prop32 = &prop[cell_off];
+
+	/*
+	 * Special handling for PCI address in PCI bus <ranges>
+	 *
+	 * PCI child address is made up of 3 cells. Advance the cell offset
+	 * by 1 so that the PCI child address can be correctly read.
+	 */
+	if (cells == 3)
+		cell_off += 1;
+	prop64 = (const fdt64_t *)&prop[cell_off];
+
 	switch (cells) {
 	case 1:
 		*val = fdt32_to_cpu(*prop32);
 		break;
 	case 2:
+	case 3:
 		*val = fdt64_to_cpu(*prop64);
 		break;
 	default:
diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig
index d17c556dba..536fe7d6e1 100644
--- a/configs/qemu-ppce500_defconfig
+++ b/configs/qemu-ppce500_defconfig
@@ -6,28 +6,47 @@ CONFIG_MPC85xx=y
 CONFIG_TARGET_QEMU_PPCE500=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=1
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_LAST_STAGE_INIT=y
-# CONFIG_MISC_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_REGINFO=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_DOS_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_BLK=y
+CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_FSL=y
 # CONFIG_MMC is not set
+CONFIG_DM_ETH=y
 CONFIG_E1000=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_MPC85XX=y
+CONFIG_DM_RTC=y
+CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+# CONFIG_SYSRESET_CMD_RESET is not set
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_POWEROFF_GPIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_ADDR_MAP=y
 CONFIG_PANIC_HANG=y
-CONFIG_OF_LIBFDT=y
diff --git a/doc/board/emulation/index.rst b/doc/board/emulation/index.rst
index a09ead1c35..be66b6bb67 100644
--- a/doc/board/emulation/index.rst
+++ b/doc/board/emulation/index.rst
@@ -8,6 +8,7 @@ Emulation
 
    qemu-arm
    qemu-mips
+   qemu-ppce500
    qemu-riscv
    qemu-x86
    qemu_capsule_update
diff --git a/doc/board/emulation/qemu-ppce500.rst b/doc/board/emulation/qemu-ppce500.rst
new file mode 100644
index 0000000000..0a5c86c61a
--- /dev/null
+++ b/doc/board/emulation/qemu-ppce500.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright (C) 2021, Bin Meng <bmeng.cn@gmail.com>
+
+QEMU PPC E500
+=============
+
+QEMU for PPC supports a special 'ppce500' machine designed for emulation and
+virtualization purposes. This document describes how to run U-Boot under it.
+
+The QEMU ppce500 machine models a generic PowerPC E500 virtual machine with
+support for the VirtIO standard networking device connected to the built-in
+PCI host controller. Some common devices in the CCSBAR space are modeled,
+including MPIC, 16550A UART devices, GPIO, I2C and PCI host controller with
+MSI delivery to MPIC. It uses device-tree to pass configuration information
+to guest software.
+
+Building U-Boot
+---------------
+Set the CROSS_COMPILE environment variable as usual, and run::
+
+    $ make qemu-ppce500_defconfig
+    $ make
+
+Running U-Boot
+--------------
+The minimal QEMU command line to get U-Boot up and running is::
+
+    $ qemu-system-ppc -nographic -machine ppce500 -bios u-boot
+
+You can also run U-Boot using 'qemu-system-ppc64'::
+
+    $ qemu-system-ppc64 -nographic -machine ppce500 -bios u-boot
+
+The commands above create a target with 128 MiB memory by default. A freely
+configurable amount of RAM can be created via the '-m' parameter. For example,
+'-m 2G' creates 2 GiB memory for the target, and the memory node in the
+embedded DTB created by QEMU reflects the new setting.
+
+Both qemu-system-ppc and qemu-system-ppc64 provide emulation for the following
+32-bit PowerPC CPUs:
+
+* e500v2
+* e500mc
+
+Additionally qemu-system-ppc64 provides support for the following 64-bit CPUs:
+
+* e5500
+* e6500
+
+The CPU type can be specified via the '-cpu' command line. If not specified,
+it creates a machine with e500v2 core. The following example shows an e6500
+based machine creation::
+
+    $ qemu-system-ppc64 -nographic -machine ppce500 -cpu e6500 -bios u-boot
+
+When U-Boot boots, you will notice the following::
+
+    CPU:   Unknown, Version: 0.0, (0x00000000)
+    Core:  e6500, Version: 2.0, (0x80400020)
+
+This is because we only specified a core name to QEMU and it does not have a
+meaningful SVR value which represents an actual SoC that integrates such core.
+You can specify a real world SoC device that QEMU has built-in support but all
+these SoCs are e500v2 based MPC85xx series, hence you cannot test anything
+built for P4080 (e500mc), P5020 (e5500) and T2080 (e6500).
+
+By default a VirtIO standard PCI networking device is connected as an ethernet
+interface at PCI address 0.1.0, but we can switch that to an e1000 NIC by::
+
+    $ qemu-system-ppc -nographic -machine ppce500 -bios u-boot \
+                      -nic tap,ifname=tap0,script=no,downscript=no,model=e1000
+
+VirtIO BLK driver is also enabled to support booting from a disk image where
+a kernel image is stored. Append the following to QEMU::
+
+    -drive file=disk.img,format=raw,id=disk0 -device virtio-blk-pci,drive=disk0
+
+Pericom pt7c4338 RTC is supported so we can use the 'date' command::
+
+    => date
+    Date: 2021-02-18 (Thursday)    Time: 15:33:20
+
+Additionally, 'poweroff' command is supported to shut down the QEMU session::
+
+    => poweroff
+    poweroff ...
+
+These have been tested in QEMU 5.2.0.
diff --git a/doc/usage/addrmap.rst b/doc/usage/addrmap.rst
new file mode 100644
index 0000000000..472fd547f3
--- /dev/null
+++ b/doc/usage/addrmap.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+addrmap command
+===============
+
+Synopsis
+--------
+
+::
+
+    addrmap
+
+Description
+-----------
+
+The addrmap command is used to display non-identity virtual-physical memory
+mappings for 32-bit CPUs.
+
+The output may look like:
+
+::
+
+    => addrmap
+               vaddr            paddr             size
+    ================ ================ ================
+            e0000000        fe0000000         00100000
+            00000000         00000000         04000000
+            04000000         04000000         04000000
+            80000000        c00000000         10000000
+            90000000        c10000000         10000000
+            a0000000        fe1000000         00010000
+
+The first column indicates the virtual address.
+The second column indicates the physical address.
+The third column indicates the mapped size.
+
+Configuration
+-------------
+
+To use the addrmap command you must specify CONFIG_CMD_ADDRMAP=y.
+It is automatically turned on when CONFIG_ADDR_MAP is set.
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index 09372d4a96..9169fff0be 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -14,6 +14,7 @@ Shell commands
 .. toctree::
    :maxdepth: 1
 
+   addrmap
    base
    bootefi
    booti
diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c
index c733603289..f7ffd8926a 100644
--- a/drivers/gpio/mpc8xxx_gpio.c
+++ b/drivers/gpio/mpc8xxx_gpio.c
@@ -20,7 +20,7 @@ struct mpc8xxx_gpio_data {
 	/* The bank's register base in memory */
 	struct ccsr_gpio __iomem *base;
 	/* The address of the registers; used to identify the bank */
-	ulong addr;
+	phys_addr_t addr;
 	/* The GPIO count of the bank */
 	uint gpio_count;
 	/* The GPDAT register cannot be used to determine the value of output
@@ -181,7 +181,7 @@ static int mpc8xxx_gpio_of_to_plat(struct udevice *dev)
 	if (dev_read_bool(dev, "little-endian"))
 		data->little_endian = true;
 
-	plat->addr = (ulong)dev_read_addr_size_index(dev, 0, (fdt_size_t *)&plat->size);
+	plat->addr = dev_read_addr_size_index(dev, 0, (fdt_size_t *)&plat->size);
 	plat->ngpios = dev_read_u32_default(dev, "ngpios", 32);
 
 	return 0;
@@ -220,7 +220,8 @@ static int mpc8xxx_gpio_probe(struct udevice *dev)
 
 	mpc8xxx_gpio_plat_to_priv(dev);
 
-	snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
+	snprintf(name, sizeof(name), "MPC@%.8llx",
+		 (unsigned long long)data->addr);
 	str = strdup(name);
 
 	if (!str)
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index e72a60c131..fc3327ec53 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -32,6 +32,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <asm/io.h>
 #include <asm/fsl_pci.h>
 
+#define MAX_PCI_REGIONS 7
+
 #ifndef CONFIG_SYS_PCI_MEMORY_BUS
 #define CONFIG_SYS_PCI_MEMORY_BUS 0
 #endif
@@ -80,6 +82,9 @@ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
 	/* Reset hose to make sure its in a clean state */
 	memset(hose, 0, sizeof(struct pci_controller));
 
+	hose->regions = (struct pci_region *)
+		calloc(1, MAX_PCI_REGIONS * sizeof(struct pci_region));
+
 	pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
 
 	return fsl_is_pci_agent(hose);
diff --git a/drivers/pci/pci_mpc85xx.c b/drivers/pci/pci_mpc85xx.c
index ab6ff45a51..574cb784a8 100644
--- a/drivers/pci/pci_mpc85xx.c
+++ b/drivers/pci/pci_mpc85xx.c
@@ -46,6 +46,7 @@ static int mpc85xx_pci_dm_write_config(struct udevice *dev, pci_dev_t bdf,
 	return 0;
 }
 
+#ifdef CONFIG_FSL_LAW
 static int
 mpc85xx_pci_dm_setup_laws(struct pci_region *io, struct pci_region *mem,
 			  struct pci_region *pre)
@@ -68,6 +69,7 @@ mpc85xx_pci_dm_setup_laws(struct pci_region *io, struct pci_region *mem,
 
 	return 0;
 }
+#endif
 
 static int mpc85xx_pci_dm_probe(struct udevice *dev)
 {
@@ -85,22 +87,24 @@ static int mpc85xx_pci_dm_probe(struct udevice *dev)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_FSL_LAW
 	mpc85xx_pci_dm_setup_laws(io, mem, pre);
+#endif
 
 	pcix = priv->cfg_addr;
 	/* BAR 1: memory */
-	out_be32(&pcix->potar1, (mem->bus_start >> 12) & 0x000fffff);
-	out_be32(&pcix->potear1, 0);
-	out_be32(&pcix->powbar1, (mem->phys_start >> 12) & 0x000fffff);
-	out_be32(&pcix->powbear1, 0);
+	out_be32(&pcix->potar1, mem->bus_start >> 12);
+	out_be32(&pcix->potear1, (u64)mem->bus_start >> 44);
+	out_be32(&pcix->powbar1, mem->phys_start >> 12);
+	out_be32(&pcix->powbear1, (u64)mem->phys_start >> 44);
 	out_be32(&pcix->powar1, (POWAR_EN | POWAR_MEM_READ |
 		 POWAR_MEM_WRITE | (__ilog2(mem->size) - 1)));
 
 	/* BAR 1: IO */
-	out_be32(&pcix->potar2, (io->bus_start >> 12) & 0x000fffff);
-	out_be32(&pcix->potear2, 0);
-	out_be32(&pcix->powbar2, (io->phys_start >> 12) & 0x000fffff);
-	out_be32(&pcix->powbear2, 0);
+	out_be32(&pcix->potar2, io->bus_start >> 12);
+	out_be32(&pcix->potear2, (u64)io->bus_start >> 44);
+	out_be32(&pcix->powbar2, io->phys_start >> 12);
+	out_be32(&pcix->powbear2, (u64)io->phys_start >> 44);
 	out_be32(&pcix->powar2, (POWAR_EN | POWAR_IO_READ |
 		 POWAR_IO_WRITE | (__ilog2(io->size) - 1)));
 
@@ -130,9 +134,8 @@ static int mpc85xx_pci_of_to_plat(struct udevice *dev)
 	addr = devfdt_get_addr_index(dev, 0);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
-	priv->cfg_addr = (void __iomem *)addr;
-	addr += 4;
-	priv->cfg_data = (void __iomem *)addr;
+	priv->cfg_addr = (void __iomem *)map_physmem(addr, 0, MAP_NOCACHE);
+	priv->cfg_data = (void __iomem *)((ulong)priv->cfg_addr + 4);
 
 	return 0;
 }
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 0e5c7c9971..968dfa4831 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -33,6 +33,12 @@ config TPL_SYSRESET
 
 if SYSRESET
 
+config SYSRESET_CMD_RESET
+	bool "sysreset implementation of the reset command"
+	default y
+	help
+	  Enable sysreset implementation of the reset command.
+
 if CMD_POWEROFF
 
 config SYSRESET_CMD_POWEROFF
diff --git a/drivers/sysreset/sysreset-uclass.c b/drivers/sysreset/sysreset-uclass.c
index a9908ebf79..6c9dc7a384 100644
--- a/drivers/sysreset/sysreset-uclass.c
+++ b/drivers/sysreset/sysreset-uclass.c
@@ -119,6 +119,7 @@ void reset_cpu(ulong addr)
 }
 
 
+#if IS_ENABLED(CONFIG_SYSRESET_CMD_RESET)
 int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	printf("resetting ...\n");
@@ -128,6 +129,7 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 
 	return 0;
 }
+#endif
 
 #if IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF)
 int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index e800720657..1835607083 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -55,6 +55,7 @@ config VIRTIO_NET
 config VIRTIO_BLK
 	bool "virtio block driver"
 	depends on VIRTIO
+	depends on BLK
 	help
 	  This is the virtual block driver for virtio. It can be used with
 	  QEMU based targets.
diff --git a/include/addr_map.h b/include/addr_map.h
index d322dd222a..55d3a6a165 100644
--- a/include/addr_map.h
+++ b/include/addr_map.h
@@ -8,9 +8,17 @@
 
 #include <asm/types.h>
 
-extern phys_addr_t addrmap_virt_to_phys(void *vaddr);
-extern void *addrmap_phys_to_virt(phys_addr_t paddr);
-extern void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
-				phys_size_t size, int idx);
+struct addrmap {
+	phys_addr_t paddr;
+	phys_size_t size;
+	unsigned long vaddr;
+};
+
+extern struct addrmap address_map[CONFIG_SYS_NUM_ADDR_MAP];
+
+phys_addr_t addrmap_virt_to_phys(void *vaddr);
+void *addrmap_phys_to_virt(phys_addr_t paddr);
+void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
+		       phys_size_t size, int idx);
 
 #endif
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index b1c8917f21..ea4da6a5fe 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -18,8 +18,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 0605f70ffc..9f83931bed 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -23,8 +23,6 @@
 
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 #include <linux/stringify.h>
 extern unsigned long get_clock_freq(void);
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 88999ef2b8..79e309c95c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -18,8 +18,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 0dcf844303..4d04833c50 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -326,12 +326,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index f59a9f5574..6f36dd417a 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -203,7 +203,7 @@
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
-#define I2C_MUX_CH_VOL_MONITOR          0xA
+#define I2C_MUX_CH_VOL_MONITOR         0xA
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_ADDR           0x63
 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
@@ -221,12 +221,6 @@
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index ee6ef18224..b2e1204e0f 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -13,8 +13,6 @@
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI1		1	/* PCI controller 1 */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -35,7 +33,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START	0x80000000
-#define CONFIG_SYS_PCI_MAP_END		0xe8000000
+#define CONFIG_SYS_PCI_MAP_END		0xe0000000
 
 /* Virtual address to a temporary map if we need it (max 128MB) */
 #define CONFIG_SYS_TMPVIRT		0xe8000000
@@ -73,29 +71,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 #define CONFIG_LBA48
 
+/* RTC */
+#define CONFIG_RTC_PT7C4338
+
 /*
  * Environment
  */
@@ -126,6 +106,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_LOADADDR		1000000
 
 #define CONFIG_BOOTCOMMAND		\
-	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
+	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0"
 
 #endif	/* __QEMU_PPCE500_H */
diff --git a/include/test/suites.h b/include/test/suites.h
index 52e8fc8155..f5d8e139ce 100644
--- a/include/test/suites.h
+++ b/include/test/suites.h
@@ -26,6 +26,8 @@ int cmd_ut_category(const char *name, const char *prefix,
 		    struct unit_test *tests, int n_ents,
 		    int argc, char *const argv[]);
 
+int do_ut_addrmap(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[]);
 int do_ut_bootm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 int do_ut_bloblist(struct cmd_tbl *cmdtp, int flag, int argc,
 		   char *const argv[]);
diff --git a/lib/Kconfig b/lib/Kconfig
index 7f4c30ec0d..7288340614 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -6,6 +6,8 @@ config ADDR_MAP
 	  Enables helper code for implementing non-identity virtual-physical
 	  memory mappings for 32bit CPUs.
 
+	  This library only works in the post-relocation phase.
+
 config SYS_NUM_ADDR_MAP
 	int "Size of the address-map table"
 	depends on ADDR_MAP
diff --git a/lib/addr_map.c b/lib/addr_map.c
index 09771f3a5a..fb2ef40007 100644
--- a/lib/addr_map.c
+++ b/lib/addr_map.c
@@ -6,11 +6,7 @@
 #include <common.h>
 #include <addr_map.h>
 
-static struct {
-	phys_addr_t paddr;
-	phys_size_t size;
-	unsigned long vaddr;
-} address_map[CONFIG_SYS_NUM_ADDR_MAP];
+struct addrmap address_map[CONFIG_SYS_NUM_ADDR_MAP];
 
 phys_addr_t addrmap_virt_to_phys(void * vaddr)
 {
diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c
index 2ce9ddb90d..7ea1cb6949 100644
--- a/net/dsa-uclass.c
+++ b/net/dsa-uclass.c
@@ -28,8 +28,8 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom)
 {
 	struct dsa_priv *priv;
 
-	if (!dev || !dev_get_uclass_priv(dev))
-		return -ENODEV;
+	if (!dev)
+		return -EINVAL;
 
 	if (headroom + tailroom > DSA_MAX_OVR)
 		return -EINVAL;
@@ -47,11 +47,13 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom)
 /* returns the DSA master Ethernet device */
 struct udevice *dsa_get_master(struct udevice *dev)
 {
-	struct dsa_priv *priv = dev_get_uclass_priv(dev);
+	struct dsa_priv *priv;
 
-	if (!priv)
+	if (!dev)
 		return NULL;
 
+	priv = dev_get_uclass_priv(dev);
+
 	return priv->master_dev;
 }
 
@@ -67,14 +69,6 @@ static int dsa_port_start(struct udevice *pdev)
 	struct dsa_ops *ops = dsa_get_ops(dev);
 	int err;
 
-	if (!priv)
-		return -ENODEV;
-
-	if (!master) {
-		dev_err(pdev, "DSA master Ethernet device not found!\n");
-		return -EINVAL;
-	}
-
 	if (ops->port_enable) {
 		struct dsa_port_pdata *port_pdata;
 
@@ -101,9 +95,6 @@ static void dsa_port_stop(struct udevice *pdev)
 	struct udevice *master = dsa_get_master(dev);
 	struct dsa_ops *ops = dsa_get_ops(dev);
 
-	if (!priv)
-		return;
-
 	if (ops->port_disable) {
 		struct dsa_port_pdata *port_pdata;
 
@@ -112,13 +103,7 @@ static void dsa_port_stop(struct udevice *pdev)
 		ops->port_disable(dev, priv->cpu_port, NULL);
 	}
 
-	/*
-	 * stop master only if it's active, don't probe it otherwise.
-	 * Under normal usage it would be active because we're using it, but
-	 * during tear-down it may have been removed ahead of us.
-	 */
-	if (master && device_active(master))
-		eth_get_ops(master)->stop(master);
+	eth_get_ops(master)->stop(master);
 }
 
 /*
@@ -137,9 +122,6 @@ static int dsa_port_send(struct udevice *pdev, void *packet, int length)
 	struct dsa_port_pdata *port_pdata;
 	int err;
 
-	if (!master)
-		return -EINVAL;
-
 	if (length + head + tail > PKTSIZE_ALIGN)
 		return -EINVAL;
 
@@ -169,9 +151,6 @@ static int dsa_port_recv(struct udevice *pdev, int flags, uchar **packetp)
 	struct dsa_port_pdata *port_pdata;
 	int length, port_index, err;
 
-	if (!master)
-		return -EINVAL;
-
 	length = eth_get_ops(master)->recv(master, flags, packetp);
 	if (length <= 0)
 		return length;
@@ -205,9 +184,6 @@ static int dsa_port_free_pkt(struct udevice *pdev, uchar *packet, int length)
 	struct udevice *master = dsa_get_master(dev);
 	struct dsa_priv *priv;
 
-	if (!master)
-		return -EINVAL;
-
 	priv = dev_get_uclass_priv(dev);
 	if (eth_get_ops(master)->free_pkt) {
 		/* return the original pointer and length to master Eth */
@@ -272,6 +248,7 @@ static int dsa_port_probe(struct udevice *pdev)
 	struct dsa_port_pdata *port_pdata;
 	struct dsa_priv *dsa_priv;
 	struct udevice *master;
+	int ret;
 
 	port_pdata = dev_get_parent_plat(pdev);
 	dsa_priv = dev_get_uclass_priv(dev);
@@ -280,6 +257,21 @@ static int dsa_port_probe(struct udevice *pdev)
 	if (!port_pdata->phy)
 		return -ENODEV;
 
+	master = dsa_get_master(dev);
+	if (!master)
+		return -ENODEV;
+
+	/*
+	 * Probe the master device. We depend on the master device for proper
+	 * operation and we also need it for MAC inheritance below.
+	 *
+	 * TODO: we assume the master device is always there and doesn't get
+	 * removed during runtime.
+	 */
+	ret = device_probe(master);
+	if (ret)
+		return ret;
+
 	/*
 	 * Inherit port's hwaddr from the DSA master, unless the port already
 	 * has a unique MAC address specified in the environment.
@@ -288,10 +280,6 @@ static int dsa_port_probe(struct udevice *pdev)
 	if (!is_zero_ethaddr(env_enetaddr))
 		return 0;
 
-	master = dsa_get_master(dev);
-	if (!master)
-		return 0;
-
 	master_pdata = dev_get_plat(master);
 	eth_pdata = dev_get_plat(pdev);
 	memcpy(eth_pdata->enetaddr, master_pdata->enetaddr, ARP_HLEN);
@@ -338,7 +326,7 @@ static int dsa_post_bind(struct udevice *dev)
 	ofnode node = dev_ofnode(dev), pnode;
 	int i, err, first_err = 0;
 
-	if (!pdata || !ofnode_valid(node))
+	if (!ofnode_valid(node))
 		return -ENODEV;
 
 	pdata->master_node = ofnode_null();
@@ -450,9 +438,6 @@ static int dsa_pre_probe(struct udevice *dev)
 	struct dsa_pdata *pdata = dev_get_uclass_plat(dev);
 	struct dsa_priv *priv = dev_get_uclass_priv(dev);
 
-	if (!pdata || !priv)
-		return -ENODEV;
-
 	priv->num_ports = pdata->num_ports;
 	priv->cpu_port = pdata->cpu_port;
 	priv->cpu_port_fixed_phy = fixed_phy_create(pdata->cpu_port_node);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e98185c064..e793cd1169 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -551,7 +551,6 @@ CONFIG_FSL_SERDES2
 CONFIG_FSL_SGMII_RISER
 CONFIG_FSL_TBCLK_EXTRA_DIV
 CONFIG_FSL_TRUST_ARCH_v1
-CONFIG_FSL_VIA
 CONFIG_FSMC_NAND_BASE
 CONFIG_FSMTDBLK
 CONFIG_FSNOTIFY
@@ -2251,8 +2250,6 @@ CONFIG_SYS_FSL_AIOP1_SIZE
 CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 CONFIG_SYS_FSL_BMAN_ADDR
 CONFIG_SYS_FSL_BMAN_OFFSET
-CONFIG_SYS_FSL_BOOTROM_BASE
-CONFIG_SYS_FSL_BOOTROM_SIZE
 CONFIG_SYS_FSL_CCSR_BASE
 CONFIG_SYS_FSL_CCSR_GUR_BE
 CONFIG_SYS_FSL_CCSR_GUR_LE
diff --git a/test/cmd/Makefile b/test/cmd/Makefile
index c84df60395..2cfe43a6bd 100644
--- a/test/cmd/Makefile
+++ b/test/cmd/Makefile
@@ -6,6 +6,7 @@ ifdef CONFIG_HUSH_PARSER
 obj-$(CONFIG_CONSOLE_RECORD) += test_echo.o
 endif
 obj-y += mem.o
+obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
 obj-$(CONFIG_CMD_MEM_SEARCH) += mem_search.o
 obj-$(CONFIG_CMD_PWM) += pwm.o
 obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
diff --git a/test/cmd/addrmap.c b/test/cmd/addrmap.c
new file mode 100644
index 0000000000..fb744485bb
--- /dev/null
+++ b/test/cmd/addrmap.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Tests for addrmap command
+ *
+ * Copyright (C) 2021, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <console.h>
+#include <test/suites.h>
+#include <test/ut.h>
+
+/* Declare a new addrmap test */
+#define ADDRMAP_TEST(_name, _flags)	UNIT_TEST(_name, _flags, addrmap_test)
+
+/* Test 'addrmap' command output */
+static int addrmap_test_basic(struct unit_test_state *uts)
+{
+	ut_assertok(console_record_reset_enable());
+	ut_assertok(run_command("addrmap", 0));
+	ut_assert_nextline("           vaddr            paddr             size");
+	ut_assert_nextline("================ ================ ================");
+	/* There should be at least one entry */
+	ut_assertok(!ut_check_console_end(uts));
+
+	return 0;
+}
+ADDRMAP_TEST(addrmap_test_basic, UT_TESTF_CONSOLE_REC);
+
+int do_ut_addrmap(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	struct unit_test *tests = ll_entry_start(struct unit_test,
+						 addrmap_test);
+	const int n_ents = ll_entry_count(struct unit_test, addrmap_test);
+
+	return cmd_ut_category("cmd_addrmap", "cmd_addrmap_", tests, n_ents,
+			       argc, argv);
+}
diff --git a/test/cmd_ut.c b/test/cmd_ut.c
index 8f3089890e..8728cc8650 100644
--- a/test/cmd_ut.c
+++ b/test/cmd_ut.c
@@ -93,6 +93,9 @@ static struct cmd_tbl cmd_ut_sub[] = {
 	U_BOOT_CMD_MKENT(bootm, CONFIG_SYS_MAXARGS, 1, do_ut_bootm, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(str, CONFIG_SYS_MAXARGS, 1, do_ut_str, "", ""),
+#ifdef CONFIG_CMD_ADDRMAP
+	U_BOOT_CMD_MKENT(addrmap, CONFIG_SYS_MAXARGS, 1, do_ut_addrmap, "", ""),
+#endif
 };
 
 static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc,
@@ -168,6 +171,9 @@ static char ut_help_text[] =
 	!defined(CONFIG_SPL_BUILD) && !defined(API_BUILD)
 	"ut unicode [test-name] - test Unicode functions\n"
 #endif
+#ifdef CONFIG_CMD_ADDRMAP
+	"ut addrmap - Very basic test of addrmap command\n"
+#endif
 	;
 #endif /* CONFIG_SYS_LONGHELP */