Merge git://git.denx.de/u-boot-dm

71 files changed, 2495 insertions, 130 deletions

diff --git a/Makefile b/Makefile
index 7eaa392839..7ce933c72a 100644
--- a/Makefile
+++ b/Makefile
@@ -802,7 +802,7 @@ quiet_cmd_pad_cat = CAT     $@
 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
 all:		$(ALL-y)
-ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
 	@echo "===================== WARNING ======================"
 	@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
 	@echo "(possibly in a subsequent patch in your series)"
@@ -1319,7 +1319,8 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
 
 spl/u-boot-spl.bin: spl/u-boot-spl
 	@:
-spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
+spl/u-boot-spl: tools prepare \
+		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
 	$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
 
 spl/sunxi-spl.bin: spl/u-boot-spl
diff --git a/README b/README
index 26d5ad273e..e906253fa2 100644
--- a/README
+++ b/README
@@ -3835,9 +3835,6 @@ Configuration Settings:
 		The memory will be freed (or in fact just forgotten) when
 		U-Boot relocates itself.
 
-		Pre-relocation malloc() is only supported on ARM and sandbox
-		at present but is fairly easy to enable for other archs.
-
 - CONFIG_SYS_MALLOC_SIMPLE
 		Provides a simple and small malloc() and calloc() for those
 		boards which do not use the full malloc in SPL (which is
diff --git a/arch/arm/dts/rk3288-firefly.dts b/arch/arm/dts/rk3288-firefly.dts
index aed8d3a712..3176d5046b 100644
--- a/arch/arm/dts/rk3288-firefly.dts
+++ b/arch/arm/dts/rk3288-firefly.dts
@@ -30,7 +30,8 @@
 		0x5 0x0>;
 	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
 		0xa60 0x40 0x10 0x0>;
-	rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>;
+	/* Add a dummy value to cause of-platdata think this is bytes */
+	rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf 0xff>;
 	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
 };
 
diff --git a/arch/arm/include/asm/arch-rockchip/sdram.h b/arch/arm/include/asm/arch-rockchip/sdram.h
index d3de42d297..e08e28f4f0 100644
--- a/arch/arm/include/asm/arch-rockchip/sdram.h
+++ b/arch/arm/include/asm/arch-rockchip/sdram.h
@@ -24,6 +24,12 @@ struct rk3288_sdram_channel {
 	u8 row_3_4;
 	u8 cs0_row;
 	u8 cs1_row;
+	/*
+	 * For of-platdata, which would otherwise convert this into two
+	 * byte-swapped integers. With a size of 9 bytes, this struct will
+	 * appear in of-platdata as a byte array.
+	 */
+	u8 dummy;
 };
 
 struct rk3288_sdram_pctl_timing {
@@ -81,12 +87,4 @@ struct rk3288_base_params {
 	u32 odt;
 };
 
-struct rk3288_sdram_params {
-	struct rk3288_sdram_channel ch[2];
-	struct rk3288_sdram_pctl_timing pctl_timing;
-	struct rk3288_sdram_phy_timing phy_timing;
-	struct rk3288_base_params base;
-	int num_channels;
-};
-
 #endif
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 15f1266a7b..123f58b27f 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -29,6 +29,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 u32 spl_boot_device(void)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	const void *blob = gd->fdt_blob;
 	struct udevice *dev;
 	const char *bootdev;
@@ -63,6 +64,7 @@ u32 spl_boot_device(void)
 	}
 
 fallback:
+#endif
 	return BOOT_DEVICE_MMC1;
 }
 
@@ -114,7 +116,6 @@ static void configure_l2ctlr(void)
 #ifdef CONFIG_SPL_MMC_SUPPORT
 static int configure_emmc(struct udevice *pinctrl)
 {
-#if !defined(CONFIG_TARGET_ROCK2) && !defined(CONFIG_TARGET_FIREFLY_RK3288)
 	struct gpio_desc desc;
 	int ret;
 
@@ -144,7 +145,6 @@ static int configure_emmc(struct udevice *pinctrl)
 		debug("gpio value ret=%d\n", ret);
 		return ret;
 	}
-#endif
 
 	return 0;
 }
@@ -247,15 +247,18 @@ void spl_board_init(void)
 		goto err;
 	}
 #ifdef CONFIG_SPL_MMC_SUPPORT
-	ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
-	if (ret) {
-		debug("%s: Failed to set up SD card\n", __func__);
-		goto err;
-	}
-	ret = configure_emmc(pinctrl);
-	if (ret) {
-		debug("%s: Failed to set up eMMC\n", __func__);
-		goto err;
+	if (!IS_ENABLED(CONFIG_TARGET_ROCK2) &&
+	    !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288)) {
+		ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
+		if (ret) {
+			debug("%s: Failed to set up SD card\n", __func__);
+			goto err;
+		}
+		ret = configure_emmc(pinctrl);
+		if (ret) {
+			debug("%s: Failed to set up eMMC\n", __func__);
+			goto err;
+		}
 	}
 #endif
 
diff --git a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
index 55ac73e9d2..b36b6afcd9 100644
--- a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
+#include <dt-structs.h>
 #include <errno.h>
 #include <ram.h>
 #include <regmap.h>
@@ -41,6 +42,19 @@ struct dram_info {
 	struct rk3288_grf *grf;
 	struct rk3288_sgrf *sgrf;
 	struct rk3288_pmu *pmu;
+	bool is_veyron;
+};
+
+struct rk3288_sdram_params {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_rockchip_rk3288_dmc of_plat;
+#endif
+	struct rk3288_sdram_channel ch[2];
+	struct rk3288_sdram_pctl_timing pctl_timing;
+	struct rk3288_sdram_phy_timing phy_timing;
+	struct rk3288_base_params base;
+	int num_channels;
+	struct regmap *map;
 };
 
 #ifdef CONFIG_SPL_BUILD
@@ -703,7 +717,7 @@ static int sdram_init(struct dram_info *dram,
 
 	return 0;
 }
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 size_t sdram_size_mb(struct rk3288_pmu *pmu)
 {
@@ -779,18 +793,36 @@ static int veyron_init(struct dram_info *priv)
 static int setup_sdram(struct udevice *dev)
 {
 	struct dram_info *priv = dev_get_priv(dev);
-	struct rk3288_sdram_params params;
+	struct rk3288_sdram_params *params = dev_get_platdata(dev);
+
+# ifdef CONFIG_ROCKCHIP_FAST_SPL
+	if (priv->is_veyron) {
+		int ret;
+
+		ret = veyron_init(priv);
+		if (ret)
+			return ret;
+	}
+# endif
+
+	return sdram_init(priv, params);
+}
+
+static int rk3288_dmc_ofdata_to_platdata(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct rk3288_sdram_params *params = dev_get_platdata(dev);
 	const void *blob = gd->fdt_blob;
 	int node = dev->of_offset;
 	int i, ret;
 
-	params.num_channels = fdtdec_get_int(blob, node,
-					     "rockchip,num-channels", 1);
-	for (i = 0; i < params.num_channels; i++) {
+	params->num_channels = fdtdec_get_int(blob, node,
+					      "rockchip,num-channels", 1);
+	for (i = 0; i < params->num_channels; i++) {
 		ret = fdtdec_get_byte_array(blob, node,
 					    "rockchip,sdram-channel",
-					    (u8 *)&params.ch[i],
-					    sizeof(params.ch[i]));
+					    (u8 *)&params->ch[i],
+					    sizeof(params->ch[i]));
 		if (ret) {
 			debug("%s: Cannot read rockchip,sdram-channel\n",
 			      __func__);
@@ -798,46 +830,82 @@ static int setup_sdram(struct udevice *dev)
 		}
 	}
 	ret = fdtdec_get_int_array(blob, node, "rockchip,pctl-timing",
-				   (u32 *)&params.pctl_timing,
-				   sizeof(params.pctl_timing) / sizeof(u32));
+				   (u32 *)&params->pctl_timing,
+				   sizeof(params->pctl_timing) / sizeof(u32));
 	if (ret) {
 		debug("%s: Cannot read rockchip,pctl-timing\n", __func__);
 		return -EINVAL;
 	}
 	ret = fdtdec_get_int_array(blob, node, "rockchip,phy-timing",
-				   (u32 *)&params.phy_timing,
-				   sizeof(params.phy_timing) / sizeof(u32));
+				   (u32 *)&params->phy_timing,
+				   sizeof(params->phy_timing) / sizeof(u32));
 	if (ret) {
 		debug("%s: Cannot read rockchip,phy-timing\n", __func__);
 		return -EINVAL;
 	}
 	ret = fdtdec_get_int_array(blob, node, "rockchip,sdram-params",
-				   (u32 *)&params.base,
-				   sizeof(params.base) / sizeof(u32));
+				   (u32 *)&params->base,
+				   sizeof(params->base) / sizeof(u32));
 	if (ret) {
 		debug("%s: Cannot read rockchip,sdram-params\n", __func__);
 		return -EINVAL;
 	}
+#ifdef CONFIG_ROCKCHIP_FAST_SPL
+	struct dram_info *priv = dev_get_priv(dev);
 
-# ifdef CONFIG_ROCKCHIP_FAST_SPL
-	if (!fdt_node_check_compatible(blob, 0, "google,veyron")) {
-		ret = veyron_init(priv);
-		if (ret)
-			return ret;
+	priv->is_veyron = !fdt_node_check_compatible(blob, 0, "google,veyron");
+#endif
+	ret = regmap_init_mem(dev, &params->map);
+	if (ret)
+		return ret;
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SPL_BUILD */
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int conv_of_platdata(struct udevice *dev)
+{
+	struct rk3288_sdram_params *plat = dev_get_platdata(dev);
+	struct dtd_rockchip_rk3288_dmc *of_plat = &plat->of_plat;
+	int i, ret;
+
+	for (i = 0; i < 2; i++) {
+		memcpy(&plat->ch[i], of_plat->rockchip_sdram_channel,
+		       sizeof(plat->ch[i]));
 	}
-# endif
+	memcpy(&plat->pctl_timing, of_plat->rockchip_pctl_timing,
+	       sizeof(plat->pctl_timing));
+	memcpy(&plat->phy_timing, of_plat->rockchip_phy_timing,
+	       sizeof(plat->phy_timing));
+	memcpy(&plat->base, of_plat->rockchip_sdram_params, sizeof(plat->base));
+	plat->num_channels = of_plat->rockchip_num_channels;
+	ret = regmap_init_mem_platdata(dev, of_plat->reg,
+				       ARRAY_SIZE(of_plat->reg) / 2,
+				       &plat->map);
+	if (ret)
+		return ret;
 
-	return sdram_init(priv, &params);
+	return 0;
 }
 #endif
 
 static int rk3288_dmc_probe(struct udevice *dev)
 {
+#ifdef CONFIG_SPL_BUILD
+	struct rk3288_sdram_params *plat = dev_get_platdata(dev);
+#endif
 	struct dram_info *priv = dev_get_priv(dev);
 	struct regmap *map;
 	int ret;
 	struct udevice *dev_clk;
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	ret = conv_of_platdata(dev);
+	if (ret)
+		return ret;
+#endif
 	map = syscon_get_regmap_by_driver_data(ROCKCHIP_SYSCON_NOC);
 	if (IS_ERR(map))
 		return PTR_ERR(map);
@@ -849,14 +917,12 @@ static int rk3288_dmc_probe(struct udevice *dev)
 	priv->sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
 	priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
 
-	ret = regmap_init_mem(dev, &map);
-	if (ret)
-		return ret;
-	priv->chan[0].pctl = regmap_get_range(map, 0);
-	priv->chan[0].publ = regmap_get_range(map, 1);
-	priv->chan[1].pctl = regmap_get_range(map, 2);
-	priv->chan[1].publ = regmap_get_range(map, 3);
-
+#ifdef CONFIG_SPL_BUILD
+	priv->chan[0].pctl = regmap_get_range(plat->map, 0);
+	priv->chan[0].publ = regmap_get_range(plat->map, 1);
+	priv->chan[1].pctl = regmap_get_range(plat->map, 2);
+	priv->chan[1].publ = regmap_get_range(plat->map, 3);
+#endif
 	ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
 	if (ret)
 		return ret;
@@ -898,10 +964,16 @@ static const struct udevice_id rk3288_dmc_ids[] = {
 };
 
 U_BOOT_DRIVER(dmc_rk3288) = {
-	.name = "rk3288_dmc",
+	.name = "rockchip_rk3288_dmc",
 	.id = UCLASS_RAM,
 	.of_match = rk3288_dmc_ids,
 	.ops = &rk3288_dmc_ops,
+#ifdef CONFIG_SPL_BUILD
+	.ofdata_to_platdata = rk3288_dmc_ofdata_to_platdata,
+#endif
 	.probe = rk3288_dmc_probe,
 	.priv_auto_alloc_size = sizeof(struct dram_info),
+#ifdef CONFIG_SPL_BUILD
+	.platdata_auto_alloc_size = sizeof(struct rk3288_sdram_params),
+#endif
 };
diff --git a/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c b/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c
index c9f7c4e32f..be4b2b00c3 100644
--- a/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/syscon_rk3288.c
@@ -23,3 +23,41 @@ U_BOOT_DRIVER(syscon_rk3288) = {
 	.id = UCLASS_SYSCON,
 	.of_match = rk3288_syscon_ids,
 };
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+static int rk3288_syscon_bind_of_platdata(struct udevice *dev)
+{
+	dev->driver_data = dev->driver->of_match->data;
+	debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(rockchip_rk3288_noc) = {
+	.name = "rockchip_rk3288_noc",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids,
+	.bind = rk3288_syscon_bind_of_platdata,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_grf) = {
+	.name = "rockchip_rk3288_grf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 1,
+	.bind = rk3288_syscon_bind_of_platdata,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_sgrf) = {
+	.name = "rockchip_rk3288_sgrf",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 2,
+	.bind = rk3288_syscon_bind_of_platdata,
+};
+
+U_BOOT_DRIVER(rockchip_rk3288_pmu) = {
+	.name = "rockchip_rk3288_pmu",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3288_syscon_ids + 3,
+	.bind = rk3288_syscon_bind_of_platdata,
+};
+#endif
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index a8a90cb7a4..d4c1ee0662 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -10,8 +10,13 @@ config SYS_BOARD
 config SYS_CPU
 	default "sandbox"
 
+config SANDBOX_SPL
+	bool "Enable SPL for sandbox"
+	select SUPPORT_SPL
+
 config SYS_CONFIG_NAME
-	default "sandbox"
+	default "sandbox_spl" if SANDBOX_SPL
+	default "sandbox" if !SANDBOX_SPL
 
 config PCI
 	bool "PCI support"
diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk
index 16fd6d508a..6d62abb035 100644
--- a/arch/sandbox/config.mk
+++ b/arch/sandbox/config.mk
@@ -20,4 +20,9 @@ cmd_u-boot__ = $(CC) -o $@ -Wl,-T u-boot.lds \
 	-Wl,--start-group $(u-boot-main) -Wl,--end-group \
 	$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map
 
+cmd_u-boot-spl = (cd $(obj) && $(CC) -o $(SPL_BIN) -Wl,-T u-boot-spl.lds \
+	-Wl,--start-group $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
+	$(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) -Wl,--end-group \
+	$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot-spl.map -Wl,--gc-sections)
+
 CONFIG_ARCH_DEVICE_TREE := sandbox
diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile
index 1b42fee141..db4363358a 100644
--- a/arch/sandbox/cpu/Makefile
+++ b/arch/sandbox/cpu/Makefile
@@ -8,6 +8,7 @@
 #
 
 obj-y	:= cpu.o os.o start.o state.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
 obj-$(CONFIG_ETH_SANDBOX_RAW)	+= eth-raw-os.o
 obj-$(CONFIG_SANDBOX_SDL)	+= sdl.o
 
diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c
index 196f3e1191..2def72212d 100644
--- a/arch/sandbox/cpu/cpu.c
+++ b/arch/sandbox/cpu/cpu.c
@@ -4,10 +4,12 @@
  */
 #define DEBUG
 #include <common.h>
-#include <dm/root.h>
+#include <errno.h>
+#include <libfdt.h>
 #include <os.h>
 #include <asm/io.h>
 #include <asm/state.h>
+#include <dm/root.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -55,7 +57,7 @@ int cleanup_before_linux_select(int flags)
 
 void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) && !defined(CONFIG_SPL_BUILD)
 	unsigned long plen = len;
 	void *ptr;
 
diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c
index 8a4d719835..2d63dd88f1 100644
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
@@ -541,6 +541,57 @@ int os_jump_to_image(const void *dest, int size)
 	return unlink(fname);
 }
 
+int os_find_u_boot(char *fname, int maxlen)
+{
+	struct sandbox_state *state = state_get_current();
+	const char *progname = state->argv[0];
+	int len = strlen(progname);
+	char *p;
+	int fd;
+
+	if (len >= maxlen || len < 4)
+		return -ENOSPC;
+
+	/* Look for 'u-boot' in the same directory as 'u-boot-spl' */
+	strcpy(fname, progname);
+	if (!strcmp(fname + len - 4, "-spl")) {
+		fname[len - 4] = '\0';
+		fd = os_open(fname, O_RDONLY);
+		if (fd >= 0) {
+			close(fd);
+			return 0;
+		}
+	}
+
+	/* Look for 'u-boot' in the parent directory of spl/ */
+	p = strstr(fname, "/spl/");
+	if (p) {
+		strcpy(p, p + 4);
+		fd = os_open(fname, O_RDONLY);
+		if (fd >= 0) {
+			close(fd);
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+int os_spl_to_uboot(const char *fname)
+{
+	struct sandbox_state *state = state_get_current();
+	char *argv[state->argc + 1];
+	int ret;
+
+	memcpy(argv, state->argv, sizeof(char *) * (state->argc + 1));
+	argv[0] = (char *)fname;
+	ret = execv(fname, argv);
+	if (ret)
+		return ret;
+
+	return unlink(fname);
+}
+
 void os_localtime(struct rtc_time *rt)
 {
 	time_t t = time(NULL);
diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c
new file mode 100644
index 0000000000..e8349c0b93
--- /dev/null
+++ b/arch/sandbox/cpu/spl.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <os.h>
+#include <spl.h>
+#include <asm/spl.h>
+#include <asm/state.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong flag)
+{
+	struct sandbox_state *state = state_get_current();
+
+	gd->arch.ram_buf = state->ram_buf;
+	gd->ram_size = state->ram_size;
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_BOARD;
+}
+
+void spl_board_announce_boot_device(void)
+{
+	char fname[256];
+	int ret;
+
+	ret = os_find_u_boot(fname, sizeof(fname));
+	if (ret) {
+		printf("(%s not found, error %d)\n", fname, ret);
+		return;
+	}
+	printf("%s\n", fname);
+}
+
+int spl_board_load_image(void)
+{
+	char fname[256];
+	int ret;
+
+	ret = os_find_u_boot(fname, sizeof(fname));
+	if (ret)
+		return ret;
+
+	/* Hopefully this will not return */
+	return os_spl_to_uboot(fname);
+}
+
+void spl_board_init(void)
+{
+	struct udevice *dev;
+
+	preloader_console_init();
+
+	/*
+	* Scan all the devices so that we can output their platform data. See
+	* sandbox_spl_probe().
+	*/
+	for (uclass_first_device(UCLASS_MISC, &dev);
+	dev;
+	uclass_next_device(&dev))
+		;
+}
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index 969618ef87..6e4ec017cc 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -73,6 +73,7 @@ static int sandbox_cmdline_cb_help(struct sandbox_state *state, const char *arg)
 }
 SANDBOX_CMDLINE_OPT_SHORT(help, 'h', 0, "Display help");
 
+#ifndef CONFIG_SPL_BUILD
 int sandbox_main_loop_init(void)
 {
 	struct sandbox_state *state = state_get_current();
@@ -97,6 +98,7 @@ int sandbox_main_loop_init(void)
 
 	return 0;
 }
+#endif
 
 static int sandbox_cmdline_cb_boot(struct sandbox_state *state,
 				      const char *arg)
diff --git a/arch/sandbox/cpu/u-boot-spl.lds b/arch/sandbox/cpu/u-boot-spl.lds
new file mode 100644
index 0000000000..7e92b4ac66
--- /dev/null
+++ b/arch/sandbox/cpu/u-boot-spl.lds
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011-2012 The Chromium OS Authors.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+SECTIONS
+{
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	__u_boot_sandbox_option_start = .;
+	_u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) }
+	__u_boot_sandbox_option_end = .;
+
+	__bss_start = .;
+}
+
+INSERT BEFORE .data;
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 2ae40148b0..e6d336f16a 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -172,6 +172,37 @@
 		};
 	};
 
+	spl-test {
+		u-boot,dm-pre-reloc;
+		compatible = "sandbox,spl-test";
+		boolval;
+		intval = <1>;
+		intarray = <2 3 4>;
+		byteval = [05];
+		bytearray = [06];
+		longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
+		stringval = "message";
+		stringarray = "multi-word", "message";
+	};
+
+	spl-test2 {
+		u-boot,dm-pre-reloc;
+		compatible = "sandbox,spl-test";
+		intval = <3>;
+		intarray = <5>;
+		byteval = [08];
+		bytearray = [01 23 34];
+		longbytearray = [09 0a 0b 0c];
+		stringval = "message2";
+		stringarray = "another", "multi-word", "message";
+	};
+
+	spl-test3 {
+		u-boot,dm-pre-reloc;
+		compatible = "sandbox,spl-test";
+		stringarray = "one";
+	};
+
 	square {
 		compatible = "demo-shape";
 		colour = "blue";
diff --git a/arch/sandbox/include/asm/spl.h b/arch/sandbox/include/asm/spl.h
new file mode 100644
index 0000000000..59f2401170
--- /dev/null
+++ b/arch/sandbox/include/asm/spl.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __asm_spl_h
+#define __asm_spl_h
+
+#define CONFIG_SPL_BOARD_LOAD_IMAGE
+
+/**
+ * Board-specific load method for boards that have a special way of loading
+ * U-Boot, which does not fit with the existing SPL code.
+ *
+ * @return 0 on success, negative errno value on failure.
+ */
+int spl_board_load_image(void);
+
+enum {
+	BOOT_DEVICE_BOARD,
+};
+
+#endif
diff --git a/arch/sandbox/lib/Makefile b/arch/sandbox/lib/Makefile
index 96761e27f7..7820c55c85 100644
--- a/arch/sandbox/lib/Makefile
+++ b/arch/sandbox/lib/Makefile
@@ -8,5 +8,7 @@
 #
 
 obj-y	+= interrupts.o
+ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_PCI)	+= pci_io.o
+endif
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
diff --git a/board/sandbox/MAINTAINERS b/board/sandbox/MAINTAINERS
index f5db773a47..4dcbf4ba03 100644
--- a/board/sandbox/MAINTAINERS
+++ b/board/sandbox/MAINTAINERS
@@ -11,3 +11,10 @@ S:	Maintained
 F:	board/sandbox/
 F:	include/configs/sandbox.h
 F:	configs/sandbox_noblk_defconfig
+
+SANDBOX SPL BOARD
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/sandbox/
+F:	include/configs/sandbox_spl.h
+F:	configs/sandbox_spl_defconfig
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 840910a684..12aed02935 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -13,7 +13,6 @@
 #include <nand.h>
 #include <fat.h>
 #include <version.h>
-#include <i2c.h>
 #include <image.h>
 #include <malloc.h>
 #include <dm/root.h>
@@ -203,7 +202,7 @@ int spl_init(void)
 	gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
 	gd->malloc_ptr = 0;
 #endif
-	if (CONFIG_IS_ENABLED(OF_CONTROL)) {
+	if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
 		ret = fdtdec_setup();
 		if (ret) {
 			debug("fdtdec_setup() returned error %d\n", ret);
@@ -211,7 +210,8 @@ int spl_init(void)
 		}
 	}
 	if (IS_ENABLED(CONFIG_SPL_DM)) {
-		ret = dm_init_and_scan(true);
+		/* With CONFIG_OF_PLATDATA, bring in all devices */
+		ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA));
 		if (ret) {
 			debug("dm_init_and_scan() returned error %d\n", ret);
 			return ret;
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index 4af91206dc..bdafc716aa 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -69,3 +69,6 @@ CONFIG_USE_PRIVATE_LIBGCC=y
 CONFIG_USE_TINY_PRINTF=y
 CONFIG_CMD_DHRYSTONE=y
 CONFIG_ERRNO_STR=y
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_SPL_OF_LIBFDT is not set
+CONFIG_ROCKCHIP_SERIAL=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
new file mode 100644
index 0000000000..0f6dda8c7e
--- /dev/null
+++ b/configs/sandbox_spl_defconfig
@@ -0,0 +1,183 @@
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_MMC=y
+CONFIG_SANDBOX_SPL=y
+CONFIG_PCI=y
+CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_I8042_KEYB=y
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_BOOTSTAGE_USER_COUNT=0x20
+CONFIG_BOOTSTAGE_FDT=y
+CONFIG_BOOTSTAGE_STASH=y
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
+CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
+CONFIG_CONSOLE_RECORD=y
+CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+CONFIG_LOOPW=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_DEMO=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SOUND=y
+CONFIG_CMD_QFW=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_TPM_TEST=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_HOSTFILE=y
+CONFIG_SPL_OF_PLATDATA=y
+CONFIG_NETCONSOLE=y
+CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DEVRES=y
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_ADC=y
+CONFIG_ADC_SANDBOX=y
+CONFIG_BLK=y
+CONFIG_CLK=y
+CONFIG_CPU=y
+CONFIG_DM_DEMO=y
+CONFIG_DM_DEMO_SIMPLE=y
+CONFIG_DM_DEMO_SHAPE=y
+CONFIG_PM8916_GPIO=y
+CONFIG_SANDBOX_GPIO=y
+CONFIG_DM_I2C_COMPAT=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_I2C_CROS_EC_LDO=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_SANDBOX=y
+CONFIG_I2C_MUX=y
+CONFIG_SPL_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_SANDBOX_MBOX=y
+CONFIG_MISC=y
+CONFIG_CMD_CROS_EC=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_I2C=y
+CONFIG_CROS_EC_LPC=y
+CONFIG_CROS_EC_SANDBOX=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_PWRSEQ=y
+CONFIG_SPL_PWRSEQ=y
+CONFIG_SYSRESET=y
+CONFIG_DM_MMC_OPS=y
+CONFIG_SANDBOX_MMC=y
+CONFIG_SPI_FLASH_SANDBOX=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_SANDBOX=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_ROCKCHIP_PINCTRL=y
+CONFIG_ROCKCHIP_3036_PINCTRL=y
+CONFIG_PINCTRL_SANDBOX=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_ACT8846=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_PMIC_MAX77686=y
+CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_RK808=y
+CONFIG_PMIC_S2MPS11=y
+CONFIG_DM_PMIC_SANDBOX=y
+CONFIG_PMIC_S5M8767=y
+CONFIG_PMIC_TPS65090=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_MAX77686=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_S5M8767=y
+CONFIG_DM_REGULATOR_SANDBOX=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_RAM=y
+CONFIG_REMOTEPROC_SANDBOX=y
+CONFIG_DM_RESET=y
+CONFIG_SANDBOX_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_SANDBOX_SERIAL=y
+CONFIG_SOUND=y
+CONFIG_SOUND_SANDBOX=y
+CONFIG_SANDBOX_SPI=y
+CONFIG_SPMI=y
+CONFIG_SPMI_SANDBOX=y
+CONFIG_TIMER=y
+CONFIG_TIMER_EARLY=y
+CONFIG_SANDBOX_TIMER=y
+CONFIG_TPM_TIS_SANDBOX=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EMUL=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL=y
+CONFIG_DM_VIDEO=y
+CONFIG_CONSOLE_ROTATION=y
+CONFIG_CONSOLE_TRUETYPE=y
+CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
+CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_TPM=y
+CONFIG_LZ4=y
+CONFIG_ERRNO_STR=y
+CONFIG_UNIT_TEST=y
+CONFIG_UT_TIME=y
+CONFIG_UT_DM=y
+CONFIG_UT_ENV=y
diff --git a/doc/driver-model/of-plat.txt b/doc/driver-model/of-plat.txt
new file mode 100644
index 0000000000..86e5e25300
--- /dev/null
+++ b/doc/driver-model/of-plat.txt
@@ -0,0 +1,310 @@
+Driver Model Compiled-in Device Tree / Platform Data
+====================================================
+
+
+Introduction
+------------
+
+Device tree is the standard configuration method in U-Boot. It is used to
+define what devices are in the system and provide configuration information
+to these devices.
+
+The overhead of adding device tree access to U-Boot is fairly modest,
+approximately 3KB on Thumb 2 (plus the size of the DT itself). This means
+that in most cases it is best to use device tree for configuration.
+
+However there are some very constrained environments where U-Boot needs to
+work. These include SPL with severe memory limitations. For example, some
+SoCs require a 16KB SPL image which must include a full MMC stack. In this
+case the overhead of device tree access may be too great.
+
+It is possible to create platform data manually by defining C structures
+for it, and reference that data in a U_BOOT_DEVICE() declaration. This
+bypasses the use of device tree completely, effectively creating a parallel
+configuration mechanism. But it is an available option for SPL.
+
+As an alternative, a new 'of-platdata' feature is provided. This converts the
+device tree contents into C code which can be compiled into the SPL binary.
+This saves the 3KB of code overhead and perhaps a few hundred more bytes due
+to more efficient storage of the data.
+
+Note: Quite a bit of thought has gone into the design of this feature.
+However it still has many rough edges and comments and suggestions are
+strongly encouraged! Quite possibly there is a much better approach.
+
+
+Caveats
+-------
+
+There are many problems with this features. It should only be used when
+strictly necessary. Notable problems include:
+
+   - Device tree does not describe data types. But the C code must define a
+        type for each property. These are guessed using heuristics which
+        are wrong in several fairly common cases. For example an 8-byte value
+        is considered to be a 2-item integer array, and is byte-swapped. A
+        boolean value that is not present means 'false', but cannot be
+        included in the structures since there is generally no mention of it
+        in the device tree file.
+
+   - Naming of nodes and properties is automatic. This means that they follow
+        the naming in the device tree, which may result in C identifiers that
+        look a bit strange.
+
+   - It is not possible to find a value given a property name. Code must use
+        the associated C member variable directly in the code. This makes
+        the code less robust in the face of device-tree changes. It also
+        makes it very unlikely that your driver code will be useful for more
+        than one SoC. Even if the code is common, each SoC will end up with
+        a different C struct name, and a likely a different format for the
+        platform data.
+
+   - The platform data is provided to drivers as a C structure. The driver
+        must use the same structure to access the data. Since a driver
+        normally also supports device tree it must use #ifdef to separate
+        out this code, since the structures are only available in SPL.
+
+
+How it works
+------------
+
+The feature is enabled by CONFIG SPL_OF_PLATDATA. This is only available
+in SPL and should be tested with:
+
+        #if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
+
+A new tool called 'dtoc' converts a device tree file either into a set of
+struct declarations, one for each compatible node, or a set of
+U_BOOT_DEVICE() declarations along with the actual platform data for each
+device. As an example, consider this MMC node:
+
+        sdmmc: dwmmc@ff0c0000 {
+                compatible = "rockchip,rk3288-dw-mshc";
+                clock-freq-min-max = <400000 150000000>;
+                clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+                         <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+                clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+                fifo-depth = <0x100>;
+                interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+                reg = <0xff0c0000 0x4000>;
+                bus-width = <4>;
+                cap-mmc-highspeed;
+                cap-sd-highspeed;
+                card-detect-delay = <200>;
+                disable-wp;
+                num-slots = <1>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+                vmmc-supply = <&vcc_sd>;
+                status = "okay";
+                u-boot,dm-pre-reloc;
+        };
+
+
+Some of these properties are dropped by U-Boot under control of the
+CONFIG_OF_SPL_REMOVE_PROPS option. The rest are processed. This will produce
+the following C struct declaration:
+
+struct dtd_rockchip_rk3288_dw_mshc {
+        fdt32_t         bus_width;
+        bool            cap_mmc_highspeed;
+        bool            cap_sd_highspeed;
+        fdt32_t         card_detect_delay;
+        fdt32_t         clock_freq_min_max[2];
+        struct phandle_2_cell clocks[4];
+        bool            disable_wp;
+        fdt32_t         fifo_depth;
+        fdt32_t         interrupts[3];
+        fdt32_t         num_slots;
+        fdt32_t         reg[2];
+        fdt32_t         vmmc_supply;
+};
+
+and the following device declaration:
+
+static struct dtd_rockchip_rk3288_dw_mshc dtv_dwmmc_at_ff0c0000 = {
+        .fifo_depth             = 0x100,
+        .cap_sd_highspeed       = true,
+        .interrupts             = {0x0, 0x20, 0x4},
+        .clock_freq_min_max     = {0x61a80, 0x8f0d180},
+        .vmmc_supply            = 0xb,
+        .num_slots              = 0x1,
+        .clocks                 = {{&dtv_clock_controller_at_ff760000, 456},
+                                   {&dtv_clock_controller_at_ff760000, 68},
+                                   {&dtv_clock_controller_at_ff760000, 114},
+                                   {&dtv_clock_controller_at_ff760000, 118}},
+        .cap_mmc_highspeed      = true,
+        .disable_wp             = true,
+        .bus_width              = 0x4,
+        .u_boot_dm_pre_reloc    = true,
+        .reg                    = {0xff0c0000, 0x4000},
+        .card_detect_delay      = 0xc8,
+};
+U_BOOT_DEVICE(dwmmc_at_ff0c0000) = {
+        .name           = "rockchip_rk3288_dw_mshc",
+        .platdata       = &dtv_dwmmc_at_ff0c0000,
+        .platdata_size  = sizeof(dtv_dwmmc_at_ff0c0000),
+};
+
+The device is then instantiated at run-time and the platform data can be
+accessed using:
+
+        struct udevice *dev;
+        struct dtd_rockchip_rk3288_dw_mshc *plat = dev_get_platdata(dev);
+
+This avoids the code overhead of converting the device tree data to
+platform data in the driver. The ofdata_to_platdata() method should
+therefore do nothing in such a driver.
+
+
+Converting of-platdata to a useful form
+---------------------------------------
+
+Of course it would be possible use the of-platdata directly in your driver
+whenever configuration information is required. However this meands that the
+driver will not be able to support device tree, since the of-platdata
+structure is not available when device tree is used. It would make no sense
+to use this structure if device tree were available, since the structure has
+all the limitations metioned in caveats above.
+
+Therefore it is recommended that the of-platdata structure should be used
+only in the probe() method of your driver. It cannot be used in the
+ofdata_to_platdata() method since this is not called when platform data is
+already present.
+
+
+How to structure your driver
+----------------------------
+
+Drivers should always support device tree as an option. The of-platdata
+feature is intended as a add-on to existing drivers.
+
+Your driver should convert the platdata struct in its probe() method. The
+existing device tree decoding logic should be kept in the
+ofdata_to_platdata() method and wrapped with #if.
+
+For example:
+
+    #include <dt-structs.h>
+
+    struct mmc_platdata {
+    #if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
+            /* Put this first since driver model will copy the data here */
+            struct dtd_mmc dtplat;
+    #endif
+            /*
+             * Other fields can go here, to be filled in by decoding from
+             * the device tree (or the C structures when of-platdata is used).
+             */
+            int fifo_depth;
+    };
+
+    static int mmc_ofdata_to_platdata(struct udevice *dev)
+    {
+    #if !CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
+            /* Decode the device tree data */
+            struct mmc_platdata *plat = dev_get_platdata(dev);
+            const void *blob = gd->fdt_blob;
+            int node = dev->of_offset;
+
+            plat->fifo_depth = fdtdec_get_int(blob, node, "fifo-depth", 0);
+    #endif
+
+            return 0;
+    }
+
+    static int mmc_probe(struct udevice *dev)
+    {
+            struct mmc_platdata *plat = dev_get_platdata(dev);
+
+    #if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
+            /* Decode the of-platdata from the C structures */
+            struct dtd_mmc *dtplat = &plat->dtplat;
+
+            plat->fifo_depth = dtplat->fifo_depth;
+    #endif
+            /* Set up the device from the plat data */
+            writel(plat->fifo_depth, ...)
+    }
+
+    static const struct udevice_id mmc_ids[] = {
+            { .compatible = "vendor,mmc" },
+            { }
+    };
+
+    U_BOOT_DRIVER(mmc_drv) = {
+            .name           = "mmc",
+            .id             = UCLASS_MMC,
+            .of_match       = mmc_ids,
+            .ofdata_to_platdata = mmc_ofdata_to_platdata,
+            .probe          = mmc_probe,
+            .priv_auto_alloc_size = sizeof(struct mmc_priv),
+            .platdata_auto_alloc_size = sizeof(struct mmc_platdata),
+    };
+
+
+In the case where SPL_OF_PLATDATA is enabled, platdata_auto_alloc_size is
+still used to allocate space for the platform data. This is different from
+the normal behaviour and is triggered by the use of of-platdata (strictly
+speaking it is a non-zero platdata_size which triggers this).
+
+The of-platdata struct contents is copied from the C structure data to the
+start of the newly allocated area. In the case where device tree is used,
+the platform data is allocated, and starts zeroed. In this case the
+ofdata_to_platdata() method should still set up the platform data (and the
+of-platdata struct will not be present).
+
+SPL must use either of-platdata or device tree. Drivers cannot use both at
+the same time, but they must support device tree. Supporting of-platdata is
+optional.
+
+The device tree becomes in accessible when CONFIG_SPL_OF_PLATDATA is enabled,
+since the device-tree access code is not compiled in. A corollary is that
+a board can only move to using of-platdata if all the drivers it uses support
+it. There would be little point in having some drivers require the device
+tree data, since then libfdt would still be needed for those drivers and
+there would be no code-size benefit.
+
+Internals
+---------
+
+The dt-structs.h file includes the generated file
+(include/generated//dt-structs.h) if CONFIG_SPL_OF_PLATDATA is enabled.
+Otherwise (such as in U-Boot proper) these structs are not available. This
+prevents them being used inadvertently. All usage must be bracketed with
+#if CONFIG_IS_ENABLED(SPL_OF_PLATDATA).
+
+The dt-platdata.c file contains the device declarations and is is built in
+spl/dt-platdata.c.
+
+Some phandles (thsoe that are recognised as such) are converted into
+points to platform data. This pointer can potentially be used to access the
+referenced device (by searching for the pointer value). This feature is not
+yet implemented, however.
+
+The beginnings of a libfdt Python module are provided. So far this only
+implements a subset of the features.
+
+The 'swig' tool is needed to build the libfdt Python module. If this is not
+found then the Python model is not used and a fallback is used instead, which
+makes use of fdtget.
+
+
+Credits
+-------
+
+This is an implementation of an idea by Tom Rini <trini@konsulko.com>.
+
+
+Future work
+-----------
+- Consider programmatically reading binding files instead of device tree
+     contents
+- Complete the phandle feature
+- Move to using a full Python libfdt module
+
+--
+Simon Glass <sjg@chromium.org>
+Google, Inc
+6/6/16
+Updated Independence Day 2016
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 6e4d67220a..e0f85677e3 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -10,6 +10,7 @@
 #include <clk.h>
 #include <clk-uclass.h>
 #include <dm.h>
+#include <dt-structs.h>
 #include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -21,6 +22,22 @@ static inline struct clk_ops *clk_dev_ops(struct udevice *dev)
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 #ifdef CONFIG_SPL_BUILD
+# if CONFIG_IS_ENABLED(OF_PLATDATA)
+int clk_get_by_index_platdata(struct udevice *dev, int index,
+			      struct phandle_2_cell *cells, struct clk *clk)
+{
+	int ret;
+
+	if (index != 0)
+		return -ENOSYS;
+	ret = uclass_get_device(UCLASS_CLK, 0, &clk->dev);
+	if (ret)
+		return ret;
+	clk->id = cells[0].id;
+
+	return 0;
+}
+# else
 int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)
 {
 	int ret;
@@ -39,6 +56,7 @@ int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)
 	clk->id = cell[1];
 	return 0;
 }
+# endif /* OF_PLATDATA */
 
 int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk)
 {
@@ -117,8 +135,8 @@ int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk)
 
 	return clk_get_by_index(dev, index, clk);
 }
-#endif
-#endif
+#endif /* CONFIG_SPL_BUILD */
+#endif /* OF_CONTROL */
 
 int clk_request(struct udevice *dev, struct clk *clk)
 {
diff --git a/drivers/clk/clk_fixed_rate.c b/drivers/clk/clk_fixed_rate.c
index 797e537907..9c4d2b322f 100644
--- a/drivers/clk/clk_fixed_rate.c
+++ b/drivers/clk/clk_fixed_rate.c
@@ -30,9 +30,11 @@ const struct clk_ops clk_fixed_rate_ops = {
 
 static int clk_fixed_rate_ofdata_to_platdata(struct udevice *dev)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	to_clk_fixed_rate(dev)->fixed_rate =
 				fdtdec_get_int(gd->fdt_blob, dev->of_offset,
 					       "clock-frequency", 0);
+#endif
 
 	return 0;
 }
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
index 2285453e8d..679f010bb7 100644
--- a/drivers/clk/clk_rk3288.c
+++ b/drivers/clk/clk_rk3288.c
@@ -7,7 +7,9 @@
 #include <common.h>
 #include <clk-uclass.h>
 #include <dm.h>
+#include <dt-structs.h>
 #include <errno.h>
+#include <mapmem.h>
 #include <syscon.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -21,6 +23,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+struct rk3288_clk_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_rockchip_rk3288_cru dtd;
+#endif
+};
+
 struct rk3288_clk_priv {
 	struct rk3288_grf *grf;
 	struct rk3288_cru *cru;
@@ -783,13 +791,30 @@ static struct clk_ops rk3288_clk_ops = {
 	.set_rate	= rk3288_clk_set_rate,
 };
 
-static int rk3288_clk_probe(struct udevice *dev)
+static int rk3288_clk_ofdata_to_platdata(struct udevice *dev)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct rk3288_clk_priv *priv = dev_get_priv(dev);
 
 	priv->cru = (struct rk3288_cru *)dev_get_addr(dev);
+#endif
+
+	return 0;
+}
+
+static int rk3288_clk_probe(struct udevice *dev)
+{
+	struct rk3288_clk_priv *priv = dev_get_priv(dev);
+
 	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	if (IS_ERR(priv->grf))
+		return PTR_ERR(priv->grf);
 #ifdef CONFIG_SPL_BUILD
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct rk3288_clk_plat *plat = dev_get_platdata(dev);
+
+	priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
+#endif
 	rkclk_init(priv->cru, priv->grf);
 #endif
 
@@ -813,12 +838,14 @@ static const struct udevice_id rk3288_clk_ids[] = {
 	{ }
 };
 
-U_BOOT_DRIVER(clk_rk3288) = {
-	.name		= "clk_rk3288",
+U_BOOT_DRIVER(rockchip_rk3288_cru) = {
+	.name		= "rockchip_rk3288_cru",
 	.id		= UCLASS_CLK,
 	.of_match	= rk3288_clk_ids,
 	.priv_auto_alloc_size = sizeof(struct rk3288_clk_priv),
+	.platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat),
 	.ops		= &rk3288_clk_ops,
 	.bind		= rk3288_clk_bind,
+	.ofdata_to_platdata	= rk3288_clk_ofdata_to_platdata,
 	.probe		= rk3288_clk_probe,
 };
diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c
index 0e56b23fbb..a7f77b4a21 100644
--- a/drivers/core/device-remove.c
+++ b/drivers/core/device-remove.c
@@ -112,7 +112,7 @@ int device_unbind(struct udevice *dev)
 
 	devres_release_all(dev);
 
-	if (dev->flags & DM_NAME_ALLOCED)
+	if (dev->flags & DM_FLAG_NAME_ALLOCED)
 		free((char *)dev->name);
 	free(dev);
 
diff --git a/drivers/core/device.c b/drivers/core/device.c
index f7fb0cc0fa..5bb1d7793d 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static int device_bind_common(struct udevice *parent, const struct driver *drv,
 			      const char *name, void *platdata,
 			      ulong driver_data, int of_offset,
-			      struct udevice **devp)
+			      uint of_platdata_size, struct udevice **devp)
 {
 	struct udevice *dev;
 	struct uclass *uc;
@@ -84,12 +84,29 @@ static int device_bind_common(struct udevice *parent, const struct driver *drv,
 		}
 	}
 
-	if (!dev->platdata && drv->platdata_auto_alloc_size) {
-		dev->flags |= DM_FLAG_ALLOC_PDATA;
-		dev->platdata = calloc(1, drv->platdata_auto_alloc_size);
-		if (!dev->platdata) {
-			ret = -ENOMEM;
-			goto fail_alloc1;
+	if (drv->platdata_auto_alloc_size) {
+		bool alloc = !platdata;
+
+		if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
+			if (of_platdata_size) {
+				dev->flags |= DM_FLAG_OF_PLATDATA;
+				if (of_platdata_size <
+						drv->platdata_auto_alloc_size)
+					alloc = true;
+			}
+		}
+		if (alloc) {
+			dev->flags |= DM_FLAG_ALLOC_PDATA;
+			dev->platdata = calloc(1,
+					       drv->platdata_auto_alloc_size);
+			if (!dev->platdata) {
+				ret = -ENOMEM;
+				goto fail_alloc1;
+			}
+			if (CONFIG_IS_ENABLED(OF_PLATDATA) && platdata) {
+				memcpy(dev->platdata, platdata,
+				       of_platdata_size);
+			}
 		}
 	}
 
@@ -202,14 +219,14 @@ int device_bind_with_driver_data(struct udevice *parent,
 				 struct udevice **devp)
 {
 	return device_bind_common(parent, drv, name, NULL, driver_data,
-				  of_offset, devp);
+				  of_offset, 0, devp);
 }
 
 int device_bind(struct udevice *parent, const struct driver *drv,
 		const char *name, void *platdata, int of_offset,
 		struct udevice **devp)
 {
-	return device_bind_common(parent, drv, name, platdata, 0, of_offset,
+	return device_bind_common(parent, drv, name, platdata, 0, of_offset, 0,
 				  devp);
 }
 
@@ -217,6 +234,7 @@ int device_bind_by_name(struct udevice *parent, bool pre_reloc_only,
 			const struct driver_info *info, struct udevice **devp)
 {
 	struct driver *drv;
+	uint platdata_size = 0;
 
 	drv = lists_driver_lookup_name(info->name);
 	if (!drv)
@@ -224,8 +242,11 @@ int device_bind_by_name(struct udevice *parent, bool pre_reloc_only,
 	if (pre_reloc_only && !(drv->flags & DM_FLAG_PRE_RELOC))
 		return -EPERM;
 
-	return device_bind(parent, drv, info->name, (void *)info->platdata,
-			   -1, devp);
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	platdata_size = info->platdata_size;
+#endif
+	return device_bind_common(parent, drv, info->name,
+			(void *)info->platdata, 0, -1, platdata_size, devp);
 }
 
 static void *alloc_priv(int size, uint flags)
@@ -608,7 +629,7 @@ const char *dev_get_uclass_name(struct udevice *dev)
 
 fdt_addr_t dev_get_addr_index(struct udevice *dev, int index)
 {
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 	fdt_addr_t addr;
 
 	if (CONFIG_IS_ENABLED(OF_TRANSLATE)) {
@@ -738,7 +759,7 @@ bool device_is_last_sibling(struct udevice *dev)
 
 void device_set_name_alloced(struct udevice *dev)
 {
-	dev->flags |= DM_NAME_ALLOCED;
+	dev->flags |= DM_FLAG_NAME_ALLOCED;
 }
 
 int device_set_name(struct udevice *dev, const char *name)
diff --git a/drivers/core/lists.c b/drivers/core/lists.c
index 0c27717790..6a634e6951 100644
--- a/drivers/core/lists.c
+++ b/drivers/core/lists.c
@@ -99,7 +99,7 @@ int device_bind_driver_to_node(struct udevice *parent, const char *drv_name,
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 /**
  * driver_check_compatible() - Check if a driver is compatible with this node
  *
diff --git a/drivers/core/regmap.c b/drivers/core/regmap.c
index 519832f173..0299ff0879 100644
--- a/drivers/core/regmap.c
+++ b/drivers/core/regmap.c
@@ -15,6 +15,49 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static struct regmap *regmap_alloc_count(int count)
+{
+	struct regmap *map;
+
+	map = malloc(sizeof(struct regmap));
+	if (!map)
+		return NULL;
+	if (count <= 1) {
+		map->range = &map->base_range;
+	} else {
+		map->range = malloc(count * sizeof(struct regmap_range));
+		if (!map->range) {
+			free(map);
+			return NULL;
+		}
+	}
+	map->range_count = count;
+
+	return map;
+}
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+int regmap_init_mem_platdata(struct udevice *dev, u32 *reg, int count,
+			     struct regmap **mapp)
+{
+	struct regmap_range *range;
+	struct regmap *map;
+
+	map = regmap_alloc_count(count);
+	if (!map)
+		return -ENOMEM;
+
+	map->base = *reg;
+	for (range = map->range; count > 0; reg += 2, range++, count--) {
+		range->start = *reg;
+		range->size = reg[1];
+	}
+
+	*mapp = map;
+
+	return 0;
+}
+#else
 int regmap_init_mem(struct udevice *dev, struct regmap **mapp)
 {
 	const void *blob = gd->fdt_blob;
@@ -37,22 +80,11 @@ int regmap_init_mem(struct udevice *dev, struct regmap **mapp)
 	if (!cell || !count)
 		return -EINVAL;
 
-	map = malloc(sizeof(struct regmap));
+	map = regmap_alloc_count(count);
 	if (!map)
 		return -ENOMEM;
 
-	if (count <= 1) {
-		map->range = &map->base_range;
-	} else {
-		map->range = malloc(count * sizeof(struct regmap_range));
-		if (!map->range) {
-			free(map);
-			return -ENOMEM;
-		}
-	}
-
 	map->base = fdtdec_get_number(cell, addr_len);
-	map->range_count = count;
 
 	for (range = map->range; count > 0;
 	     count--, cell += both_len, range++) {
@@ -64,6 +96,7 @@ int regmap_init_mem(struct udevice *dev, struct regmap **mapp)
 
 	return 0;
 }
+#endif
 
 void *regmap_get_range(struct regmap *map, unsigned int range_num)
 {
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 95886add23..158702406e 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -188,7 +188,7 @@ int dm_scan_platdata(bool pre_reloc_only)
 	return ret;
 }
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 int dm_scan_fdt_node(struct udevice *parent, const void *blob, int offset,
 		     bool pre_reloc_only)
 {
@@ -244,7 +244,7 @@ int dm_init_and_scan(bool pre_reloc_only)
 		return ret;
 	}
 
-	if (CONFIG_IS_ENABLED(OF_CONTROL)) {
+	if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
 		ret = dm_scan_fdt(gd->fdt_blob, pre_reloc_only);
 		if (ret) {
 			debug("dm_scan_fdt() failed: %d\n", ret);
diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c
index e03f46af57..01bd9683a7 100644
--- a/drivers/core/syscon-uclass.c
+++ b/drivers/core/syscon-uclass.c
@@ -29,7 +29,20 @@ static int syscon_pre_probe(struct udevice *dev)
 {
 	struct syscon_uc_info *priv = dev_get_uclass_priv(dev);
 
+	/*
+	 * With OF_PLATDATA we really have no way of knowing the format of
+	 * the device-specific platform data. So we assume that it starts with
+	 * a 'reg' member, and this holds a single address and size. Drivers
+	 * using OF_PLATDATA will need to ensure that this is true.
+	 */
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct syscon_base_platdata *plat = dev_get_platdata(dev);
+
+	return regmap_init_mem_platdata(dev, plat->reg, ARRAY_SIZE(plat->reg),
+					&priv->regmap);
+#else
 	return regmap_init_mem(dev, &priv->regmap);
+#endif
 }
 
 int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp)
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 066639ba1f..fff6f0cdf9 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -29,12 +29,19 @@ obj-$(CONFIG_PDSP188x) += pdsp188x.o
 obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
 obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
 ifdef CONFIG_DM_I2C
+ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
 endif
+endif
 obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
 obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o
 obj-$(CONFIG_STATUS_LED) += status_led.o
 obj-$(CONFIG_SANDBOX) += swap_case.o
+ifdef CONFIG_SPL_OF_PLATDATA
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SANDBOX) += spltest_sandbox.o
+endif
+endif
 obj-$(CONFIG_SANDBOX) += syscon_sandbox.o
 obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
 obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
diff --git a/drivers/misc/spltest_sandbox.c b/drivers/misc/spltest_sandbox.c
new file mode 100644
index 0000000000..1fef8252ab
--- /dev/null
+++ b/drivers/misc/spltest_sandbox.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int sandbox_spl_probe(struct udevice *dev)
+{
+	struct dtd_sandbox_spl_test *plat = dev_get_platdata(dev);
+	int i;
+
+	printf("of-platdata probe:\n");
+	printf("bool %d\n", plat->boolval);
+
+	printf("byte %02x\n", plat->byteval);
+	printf("bytearray");
+	for (i = 0; i < sizeof(plat->bytearray); i++)
+		printf(" %02x", plat->bytearray[i]);
+	printf("\n");
+
+	printf("int %d\n", plat->intval);
+	printf("intarray");
+	for (i = 0; i < ARRAY_SIZE(plat->intarray); i++)
+		printf(" %d", plat->intarray[i]);
+	printf("\n");
+
+	printf("longbytearray");
+	for (i = 0; i < sizeof(plat->longbytearray); i++)
+		printf(" %02x", plat->longbytearray[i]);
+	printf("\n");
+
+	printf("string %s\n", plat->stringval);
+	printf("stringarray");
+	for (i = 0; i < ARRAY_SIZE(plat->stringarray); i++)
+		printf(" \"%s\"", plat->stringarray[i]);
+	printf("\n");
+
+	return 0;
+}
+
+U_BOOT_DRIVER(sandbox_spl_test) = {
+	.name	= "sandbox_spl_test",
+	.id	= UCLASS_MISC,
+	.flags	= DM_FLAG_PRE_RELOC,
+	.probe	= sandbox_spl_probe,
+};
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index 691a51557d..020a59b921 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -7,8 +7,10 @@
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
+#include <dt-structs.h>
 #include <dwmmc.h>
 #include <errno.h>
+#include <mapmem.h>
 #include <pwrseq.h>
 #include <syscon.h>
 #include <asm/gpio.h>
@@ -19,6 +21,9 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct rockchip_mmc_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_rockchip_rk3288_dw_mshc dtplat;
+#endif
 	struct mmc_config cfg;
 	struct mmc mmc;
 };
@@ -26,6 +31,9 @@ struct rockchip_mmc_plat {
 struct rockchip_dwmmc_priv {
 	struct clk clk;
 	struct dwmci_host host;
+	int fifo_depth;
+	bool fifo_mode;
+	u32 minmax[2];
 };
 
 static uint rockchip_dwmmc_get_mmc_clk(struct dwmci_host *host, uint freq)
@@ -45,6 +53,7 @@ static uint rockchip_dwmmc_get_mmc_clk(struct dwmci_host *host, uint freq)
 
 static int rockchip_dwmmc_ofdata_to_platdata(struct udevice *dev)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct rockchip_dwmmc_priv *priv = dev_get_priv(dev);
 	struct dwmci_host *host = &priv->host;
 
@@ -61,6 +70,16 @@ static int rockchip_dwmmc_ofdata_to_platdata(struct udevice *dev)
 	else
 		host->dev_index = 1;
 
+	priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+				    "fifo-depth", 0);
+	if (priv->fifo_depth < 0)
+		return -EINVAL;
+	priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev->of_offset,
+					  "fifo-mode");
+	if (fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
+				 "clock-freq-min-max", priv->minmax, 2))
+		return -EINVAL;
+#endif
 	return 0;
 }
 
@@ -71,28 +90,34 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 	struct rockchip_dwmmc_priv *priv = dev_get_priv(dev);
 	struct dwmci_host *host = &priv->host;
 	struct udevice *pwr_dev __maybe_unused;
-	u32 minmax[2];
 	int ret;
-	int fifo_depth;
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_rockchip_rk3288_dw_mshc *dtplat = &plat->dtplat;
+
+	host->name = dev->name;
+	host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+	host->buswidth = dtplat->bus_width;
+	host->get_mmc_clk = rockchip_dwmmc_get_mmc_clk;
+	host->priv = dev;
+	host->dev_index = 0;
+	priv->fifo_depth = dtplat->fifo_depth;
+	priv->fifo_mode = 0;
+	memcpy(priv->minmax, dtplat->clock_freq_min_max, sizeof(priv->minmax));
+
+	ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
+	if (ret < 0)
+		return ret;
+#else
 	ret = clk_get_by_index(dev, 0, &priv->clk);
 	if (ret < 0)
 		return ret;
-
-	if (fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
-				 "clock-freq-min-max", minmax, 2))
-		return -EINVAL;
-
-	fifo_depth = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-				    "fifo-depth", 0);
-	if (fifo_depth < 0)
-		return -EINVAL;
-
+#endif
 	host->fifoth_val = MSIZE(0x2) |
-		RX_WMARK(fifo_depth / 2 - 1) | TX_WMARK(fifo_depth / 2);
+		RX_WMARK(priv->fifo_depth / 2 - 1) |
+		TX_WMARK(priv->fifo_depth / 2);
 
-	if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset, "fifo-mode"))
-		host->fifo_mode = true;
+	host->fifo_mode = priv->fifo_mode;
 
 #ifdef CONFIG_PWRSEQ
 	/* Enable power if needed */
@@ -105,7 +130,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 	}
 #endif
 	dwmci_setup_cfg(&plat->cfg, dev->name, host->buswidth, host->caps,
-			minmax[1], minmax[0]);
+			priv->minmax[1], priv->minmax[0]);
 	host->mmc = &plat->mmc;
 	host->mmc->priv = &priv->host;
 	host->mmc->dev = dev;
@@ -132,7 +157,7 @@ static const struct udevice_id rockchip_dwmmc_ids[] = {
 };
 
 U_BOOT_DRIVER(rockchip_dwmmc_drv) = {
-	.name		= "rockchip_dwmmc",
+	.name		= "rockchip_rk3288_dw_mshc",
 	.id		= UCLASS_MMC,
 	.of_match	= rockchip_dwmmc_ids,
 	.ofdata_to_platdata = rockchip_dwmmc_ofdata_to_platdata,
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
index 1fa1daa939..8cb3b8228e 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
@@ -476,6 +476,7 @@ static int rk3288_pinctrl_request(struct udevice *dev, int func, int flags)
 static int rk3288_pinctrl_get_periph_id(struct udevice *dev,
 					struct udevice *periph)
 {
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	u32 cell[3];
 	int ret;
 
@@ -506,6 +507,7 @@ static int rk3288_pinctrl_get_periph_id(struct udevice *dev,
 	case 103:
 		return PERIPH_ID_HDMI;
 	}
+#endif
 
 	return -ENOENT;
 }
@@ -664,8 +666,12 @@ static struct pinctrl_ops rk3288_pinctrl_ops = {
 
 static int rk3288_pinctrl_bind(struct udevice *dev)
 {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	return 0;
+#else
 	/* scan child GPIO banks */
 	return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+#endif
 }
 
 #ifndef CONFIG_SPL_BUILD
@@ -719,7 +725,7 @@ static const struct udevice_id rk3288_pinctrl_ids[] = {
 };
 
 U_BOOT_DRIVER(pinctrl_rk3288) = {
-	.name		= "pinctrl_rk3288",
+	.name		= "rockchip_rk3288_pinctrl",
 	.id		= UCLASS_PINCTRL,
 	.of_match	= rk3288_pinctrl_ids,
 	.priv_auto_alloc_size = sizeof(struct rk3288_pinctrl_priv),
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0e3890391b..9ff7234d61 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -312,6 +312,15 @@ config SYS_NS16550
 	  be used. It can be a constant or a function to get clock, eg,
 	  get_serial_clock().
 
+config ROCKCHIP_SERIAL
+	bool "Rockchip on-chip UART support"
+	depends on DM_SERIAL && SPL_OF_PLATDATA
+	help
+	  Select this to enable a debug UART for Rockchip devices when using
+	  CONFIG_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
+	  This uses the ns16550 driver, converting the platdata from of-platdata
+	  to the ns16550 format.
+
 config SANDBOX_SERIAL
 	bool "Sandbox UART support"
 	depends on SANDBOX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 92cbea5913..6986d659ab 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_S5P) += serial_s5p.o
 obj-$(CONFIG_MXC_UART) += serial_mxc.o
 obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
 obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
+endif
 obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o
 obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index c6cb3eb500..88fca15357 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -347,7 +347,7 @@ int ns16550_serial_probe(struct udevice *dev)
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct ns16550_platdata *plat = dev->platdata;
@@ -416,6 +416,7 @@ const struct dm_serial_ops ns16550_serial_ops = {
 	.setbrg = ns16550_serial_setbrg,
 };
 
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 /*
  * Please consider existing compatible strings before adding a new
@@ -452,4 +453,5 @@ U_BOOT_DRIVER(ns16550_serial) = {
 	.flags	= DM_FLAG_PRE_RELOC,
 };
 #endif
+#endif /* !OF_PLATDATA */
 #endif /* CONFIG_DM_SERIAL */
diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c
index 58f882b22a..bcc3465312 100644
--- a/drivers/serial/sandbox.c
+++ b/drivers/serial/sandbox.c
@@ -115,7 +115,9 @@ static int sandbox_serial_pending(struct udevice *dev, bool input)
 		return 0;
 
 	os_usleep(100);
+#ifndef CONFIG_SPL_BUILD
 	video_sync_all();
+#endif
 	if (next_index == serial_buf_read)
 		return 1;	/* buffer full */
 
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 0ce5c44f33..19f38e162e 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -33,7 +33,13 @@ static void serial_find_console_or_panic(void)
 	struct udevice *dev;
 	int node;
 
-	if (CONFIG_IS_ENABLED(OF_CONTROL) && blob) {
+	if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
+		uclass_first_device(UCLASS_SERIAL, &dev);
+		if (dev) {
+			gd->cur_serial_dev = dev;
+			return;
+		}
+	} else if (CONFIG_IS_ENABLED(OF_CONTROL) && blob) {
 		/* Check for a chosen console */
 		node = fdtdec_get_chosen_node(blob, "stdout-path");
 		if (node < 0) {
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
new file mode 100644
index 0000000000..6bac95a414
--- /dev/null
+++ b/drivers/serial/serial_rockchip.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <asm/arch/clock.h>
+
+struct rockchip_uart_platdata {
+	struct dtd_rockchip_rk3288_uart dtplat;
+	struct ns16550_platdata plat;
+};
+
+struct dtd_rockchip_rk3288_uart *dtplat, s_dtplat;
+
+static int rockchip_serial_probe(struct udevice *dev)
+{
+	struct rockchip_uart_platdata *plat = dev_get_platdata(dev);
+
+	/* Create some new platform data for the standard driver */
+	plat->plat.base = plat->dtplat.reg[0];
+	plat->plat.reg_shift = plat->dtplat.reg_shift;
+	plat->plat.clock = plat->dtplat.clock_frequency;
+	dev->platdata = &plat->plat;
+
+	return ns16550_serial_probe(dev);
+}
+
+U_BOOT_DRIVER(rockchip_rk3288_uart) = {
+	.name	= "rockchip_rk3288_uart",
+	.id	= UCLASS_SERIAL,
+	.priv_auto_alloc_size = sizeof(struct NS16550),
+	.platdata_auto_alloc_size = sizeof(struct rockchip_uart_platdata),
+	.probe	= rockchip_serial_probe,
+	.ops	= &ns16550_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+};
diff --git a/dts/Kconfig b/dts/Kconfig
index c56c1299c0..4b7d8b15cc 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -85,4 +85,25 @@ config OF_SPL_REMOVE_PROPS
 	  can be discarded. This option defines the list of properties to
 	  discard.
 
+config SPL_OF_PLATDATA
+	bool "Generate platform data for use in SPL"
+	depends on SPL_OF_CONTROL
+	help
+	  For very constrained SPL environments the overhead of decoding
+	  device tree nodes and converting their contents into platform data
+	  is too large. This overhead includes libfdt code as well as the
+	  device tree contents itself. The latter is fairly compact, but the
+	  former can add 3KB or more to a Thumb 2 Image.
+
+	  This option enables generation of platform data from the device
+	  tree as C code. This code creates devices using U_BOOT_DEVICE()
+	  declarations. The benefit is that it allows driver code to access
+	  the platform data directly in C structures, avoidin the libfdt
+	  overhead.
+
+	  This option works by generating C structure declarations for each
+	  compatible string, then adding platform data and U_BOOT_DEVICE
+	  declarations for each node. See README.platdata for more
+	  information.
+
 endmenu
diff --git a/include/clk.h b/include/clk.h
index 2f31cf70e3..161bc2825f 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -60,6 +60,10 @@ struct clk {
 };
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
+struct phandle_2_cell;
+int clk_get_by_index_platdata(struct udevice *dev, int index,
+			      struct phandle_2_cell *cells, struct clk *clk);
+
 /**
  * clock_get_by_index - Get/request a clock by integer index.
  *
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 23a0c40ca5..4de89f8879 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -16,8 +16,10 @@
 
 #endif
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_IO_TRACE
 #define CONFIG_CMD_IOTRACE
+#endif
 
 #ifndef CONFIG_TIMER
 #define CONFIG_SYS_TIMER_RATE		1000000
@@ -192,6 +194,7 @@
 #define CONFIG_CMD_LZMADEC
 #define CONFIG_CMD_DATE
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_CMD_IDE
 #define CONFIG_SYS_IDE_MAXBUS		1
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0
@@ -201,6 +204,7 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	1
 #define CONFIG_SYS_ATA_ALT_OFFSET	2
 #define CONFIG_SYS_ATA_STRIDE		4
+#endif
 
 #define CONFIG_SCSI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/sandbox_spl.h b/include/configs/sandbox_spl.h
new file mode 100644
index 0000000000..ffc309867a
--- /dev/null
+++ b/include/configs/sandbox_spl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SANDBOX_SPL_CONFIG_H
+#define __SANDBOX_SPL_CONFIG_H
+
+#include <configs/sandbox.h>
+
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#endif
diff --git a/include/dm/device.h b/include/dm/device.h
index 1bfcf3bcbc..c825d47236 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -42,7 +42,9 @@ struct driver_info;
 #define DM_FLAG_BOUND			(1 << 6)
 
 /* Device name is allocated and should be freed on unbind() */
-#define DM_NAME_ALLOCED			(1 << 7)
+#define DM_FLAG_NAME_ALLOCED		(1 << 7)
+
+#define DM_FLAG_OF_PLATDATA		(1 << 8)
 
 /**
  * struct udevice - An instance of a driver
@@ -553,7 +555,7 @@ int device_set_name(struct udevice *dev, const char *name);
 /**
  * device_set_name_alloced() - note that a device name is allocated
  *
- * This sets the DM_NAME_ALLOCED flag for the device, so that when it is
+ * This sets the DM_FLAG_NAME_ALLOCED flag for the device, so that when it is
  * unbound the name will be freed. This avoids memory leaks.
  *
  * @dev:	Device to update
diff --git a/include/dm/platdata.h b/include/dm/platdata.h
index 6f4f00140e..488b2ab0ae 100644
--- a/include/dm/platdata.h
+++ b/include/dm/platdata.h
@@ -22,10 +22,15 @@
  *
  * @name:	Driver name
  * @platdata:	Driver-specific platform data
+ * @platdata_size: Size of platform data structure
+ * @flags:	Platform data flags (DM_FLAG_...)
  */
 struct driver_info {
 	const char *name;
 	const void *platdata;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	uint platdata_size;
+#endif
 };
 
 /**
diff --git a/include/dt-structs.h b/include/dt-structs.h
new file mode 100644
index 0000000000..e13afa6608
--- /dev/null
+++ b/include/dt-structs.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DT_STTUCTS
+#define __DT_STTUCTS
+
+/* These structures may only be used in SPL */
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+struct phandle_2_cell {
+	const void *node;
+	int id;
+};
+#include <generated/dt-structs.h>
+#endif
+
+#endif
diff --git a/include/os.h b/include/os.h
index 954a48c991..1782e50e77 100644
--- a/include/os.h
+++ b/include/os.h
@@ -287,6 +287,31 @@ int os_read_ram_buf(const char *fname);
 int os_jump_to_image(const void *dest, int size);
 
 /**
+ * os_find_u_boot() - Determine the path to U-Boot proper
+ *
+ * This function is intended to be called from within sandbox SPL. It uses
+ * a few heuristics to find U-Boot proper. Normally it is either in the same
+ * directory, or the directory above (since u-boot-spl is normally in an
+ * spl/ subdirectory when built).
+ *
+ * @fname:	Place to put full path to U-Boot
+ * @maxlen:	Maximum size of @fname
+ * @return 0 if OK, -NOSPC if the filename is too large, -ENOENT if not found
+ */
+int os_find_u_boot(char *fname, int maxlen);
+
+/**
+ * os_spl_to_uboot() - Run U-Boot proper
+ *
+ * When called from SPL, this runs U-Boot proper. The filename is obtained by
+ * calling os_find_u_boot().
+ *
+ * @fname:	Full pathname to U-Boot executable
+ * @return 0 if OK, -ve on error
+ */
+int os_spl_to_uboot(const char *fname);
+
+/**
  * Read the current system time
  *
  * This reads the current Local Time and places it into the provided
diff --git a/include/regmap.h b/include/regmap.h
index eccf7707f4..1eed94e47a 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -57,6 +57,22 @@ int regmap_read(struct regmap *map, uint offset, uint *valp);
 int regmap_init_mem(struct udevice *dev, struct regmap **mapp);
 
 /**
+ * regmap_init_mem_platdata() - Set up a new memory register map for of-platdata
+ *
+ * This creates a new regmap with a list of regions passed in, rather than
+ * using the device tree. It only supports 32-bit machines.
+ *
+ * Use regmap_uninit() to free it.
+ *
+ * @dev:	Device that uses this map
+ * @reg:	List of address, size pairs
+ * @count:	Number of pairs (e.g. 1 if the regmap has a single entry)
+ * @mapp:	Returns allocated map
+ */
+int regmap_init_mem_platdata(struct udevice *dev, u32 *reg, int count,
+			     struct regmap **mapp);
+
+/**
  * regmap_get_range() - Obtain the base memory address of a regmap range
  *
  * @map:	Regmap to query
diff --git a/include/syscon.h b/include/syscon.h
index 4593b6e3eb..34842aa470 100644
--- a/include/syscon.h
+++ b/include/syscon.h
@@ -23,6 +23,17 @@ struct syscon_ops {
 
 #define syscon_get_ops(dev)        ((struct syscon_ops *)(dev)->driver->ops)
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+/*
+ * We don't support 64-bit machines. If they are so resource-contrained that
+ * they need to use OF_PLATDATA, something is horribly wrong with the
+ * education of our hardware engineers.
+ */
+struct syscon_base_platdata {
+	u32 reg[2];
+};
+#endif
+
 /**
  * syscon_get_regmap() - Get access to a register map
  *
diff --git a/lib/Makefile b/lib/Makefile
index f48d90103d..f6a8ba1227 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -48,11 +48,10 @@ obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
 obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
 
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/
-ifdef CONFIG_SPL_OF_CONTROL
-obj-$(CONFIG_OF_LIBFDT) += libfdt/
-endif
+ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy)
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o
+endif
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
diff --git a/lib/libfdt/libfdt.swig b/lib/libfdt/libfdt.swig
new file mode 100644
index 0000000000..14f583dfbe
--- /dev/null
+++ b/lib/libfdt/libfdt.swig
@@ -0,0 +1,89 @@
+/* File: libfdt.i */
+%module libfdt
+
+%{
+#define SWIG_FILE_WITH_INIT
+#include "libfdt.h"
+%}
+
+%pythoncode %{
+def Raise(errnum):
+    raise ValueError('Error %s' % fdt_strerror(errnum))
+
+def Name(fdt, offset):
+    name, len = fdt_get_name(fdt, offset)
+    return name
+
+def String(fdt, offset):
+    offset = fdt32_to_cpu(offset)
+    name = fdt_string(fdt, offset)
+    return name
+
+def swap32(x):
+    return (((x << 24) & 0xFF000000) |
+            ((x <<  8) & 0x00FF0000) |
+            ((x >>  8) & 0x0000FF00) |
+            ((x >> 24) & 0x000000FF))
+
+def fdt32_to_cpu(x):
+    return swap32(x)
+
+def Data(prop):
+    set_prop(prop)
+    return get_prop_data()
+%}
+
+%include "typemaps.i"
+%include "cstring.i"
+
+%typemap(in) void* = char*;
+
+typedef int fdt32_t;
+
+struct fdt_property {
+        fdt32_t tag;
+        fdt32_t len;
+        fdt32_t nameoff;
+        char data[0];
+};
+
+/*
+ * This is a work-around since I'm not sure of a better way to copy out the
+ * contents of a string. This is used in dtoc/GetProps(). The intent is to
+ * pass in a pointer to a property and access the data field at the end of
+ * it. Ideally the Data() function above would be able to do this directly,
+ * but I'm not sure how to do that.
+ */
+#pragma SWIG nowarn=454
+%inline %{
+    static struct fdt_property *cur_prop;
+
+    void set_prop(struct fdt_property *prop) {
+        cur_prop = prop;
+    }
+%}
+
+%cstring_output_allocate_size(char **s, int *sz, free(*$1));
+%inline %{
+    void get_prop_data(char **s, int *sz) {
+        *sz = fdt32_to_cpu(cur_prop->len);
+        *s = (char *)malloc(*sz);
+        if (!*s)
+            *sz = 0;
+        else
+            memcpy(*s, cur_prop + 1, *sz);
+    }
+%}
+
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
+int fdt_path_offset(const void *fdt, const char *path);
+int fdt_first_property_offset(const void *fdt, int nodeoffset);
+int fdt_next_property_offset(const void *fdt, int offset);
+const char *fdt_strerror(int errval);
+const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
+                                                      int offset,
+                                                      int *OUTPUT);
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *OUTPUT);
+const char *fdt_string(const void *fdt, int stroffset);
+int fdt_first_subnode(const void *fdt, int offset);
+int fdt_next_subnode(const void *fdt, int offset);
diff --git a/lib/libfdt/setup.py b/lib/libfdt/setup.py
new file mode 100644
index 0000000000..62e7bcc1ac
--- /dev/null
+++ b/lib/libfdt/setup.py
@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+"""
+setup.py file for SWIG libfdt
+"""
+
+from distutils.core import setup, Extension
+import os
+import sys
+
+# Don't cross-compile - always use the host compiler.
+del os.environ['CROSS_COMPILE']
+del os.environ['CC']
+
+progname = sys.argv[0]
+cflags = sys.argv[1]
+files = sys.argv[2:]
+
+if cflags:
+    cflags = [flag for flag in cflags.split(' ') if flag]
+else:
+    cflags = None
+
+libfdt_module = Extension(
+    '_libfdt',
+    sources = files,
+    extra_compile_args =  cflags
+)
+
+sys.argv = [progname, '--quiet', 'build_ext', '--inplace']
+
+setup (name = 'libfdt',
+       version = '0.1',
+       author      = "SWIG Docs",
+       description = """Simple swig libfdt from docs""",
+       ext_modules = [libfdt_module],
+       py_modules = ["libfdt"],
+       )
diff --git a/lib/libfdt/test_libfdt.py b/lib/libfdt/test_libfdt.py
new file mode 100644
index 0000000000..14d0da4fb3
--- /dev/null
+++ b/lib/libfdt/test_libfdt.py
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+import os
+import sys
+
+our_path = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(our_path, '../../b/sandbox_spl/tools'))
+
+import libfdt
+
+with open('b/sandbox_spl/u-boot.dtb') as fd:
+    fdt = fd.read()
+
+print libfdt.fdt_path_offset(fdt, "/aliases")
diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c
index b334f053cc..1aa43aba44 100644
--- a/lib/tiny-printf.c
+++ b/lib/tiny-printf.c
@@ -185,3 +185,12 @@ int snprintf(char *buf, size_t size, const char *fmt, ...)
 
 	return ret;
 }
+
+void __assert_fail(const char *assertion, const char *file, unsigned line,
+		   const char *function)
+{
+	/* This will not return */
+	printf("%s:%u: %s: Assertion `%s' failed.", file, line, function,
+	       assertion);
+	hang();
+}
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index bff8b5bc61..763a699c4c 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -28,12 +28,16 @@ __hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
 # C code
 # Executables compiled from a single .c file
 host-csingle	:= $(foreach m,$(__hostprogs), \
-			$(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
+			$(if $($(m)-objs)$($(m)-cxxobjs)$($(m)-sharedobjs),,$(m)))
 
 # C executables linked based on several .o files
 host-cmulti	:= $(foreach m,$(__hostprogs),\
 		   $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
 
+# Shared object libraries
+host-shared	:= $(foreach m,$(__hostprogs),\
+		   $(if $($(m)-sharedobjs),$(m))))
+
 # Object (.o) files compiled from .c files
 host-cobjs	:= $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
 
@@ -59,6 +63,7 @@ host-cmulti	:= $(addprefix $(obj)/,$(host-cmulti))
 host-cobjs	:= $(addprefix $(obj)/,$(host-cobjs))
 host-cxxmulti	:= $(addprefix $(obj)/,$(host-cxxmulti))
 host-cxxobjs	:= $(addprefix $(obj)/,$(host-cxxobjs))
+host-shared	:= $(addprefix $(obj)/,$(host-shared))
 host-objdirs    := $(addprefix $(obj)/,$(host-objdirs))
 
 obj-dirs += $(host-objdirs)
@@ -128,4 +133,4 @@ $(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
 	$(call if_changed_dep,host-cxxobjs)
 
 targets += $(host-csingle)  $(host-cmulti) $(host-cobjs)\
-	   $(host-cxxmulti) $(host-cxxobjs)
+	   $(host-cxxmulti) $(host-cxxobjs) $(host-shared)
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 0997fd9fdd..3ba974226b 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -45,6 +45,7 @@ LDFLAGS_FINAL += --gc-sections
 # FIX ME
 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
 							$(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
 
@@ -76,6 +77,9 @@ endif
 
 u-boot-spl-init := $(head-y)
 u-boot-spl-main := $(libs-y)
+ifdef CONFIG_SPL_OF_PLATDATA
+u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
+endif
 
 # Linker Script
 ifdef CONFIG_SPL_LDSCRIPT
@@ -169,7 +173,7 @@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
-ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE),yy)
+ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy)
 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin $(obj)/$(SPL_BIN)-pad.bin \
 		$(obj)/$(SPL_BIN).dtb FORCE
 	$(call if_changed,cat)
@@ -207,6 +211,32 @@ cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 $(obj)/$(SPL_BIN).cfg:	include/config.h FORCE
 	$(call if_changed,cpp_cfg)
 
+pythonpath = PYTHONPATH=tools
+
+quiet_cmd_dtocc = DTOC C  $@
+cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata
+
+quiet_cmd_dtoch = DTOC H  $@
+cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct
+
+quiet_cmd_plat = PLAT    $@
+cmd_plat = $(CC) $(c_flags) -c $< -o $@
+
+$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c include/generated/dt-structs.h
+	$(call if_changed,plat)
+
+PHONY += dts_dir
+dts_dir:
+	$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
+
+include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
+	$(call if_changed,dtoch)
+
+$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
+	$(call if_changed,dtocc)
+
+dtoc: #$(objtree)/tools/_libfdt.so
+
 ifdef CONFIG_SAMSUNG
 ifdef CONFIG_VAR_SIZE_SPL
 VAR_SIZE_PARAM = --vs
@@ -241,19 +271,24 @@ cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
 $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
 	$(call if_changed,mksunxiboot)
 
-quiet_cmd_u-boot-spl = LD      $@
-      cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+# Rule to link u-boot-spl
+# May be overridden by arch/$(ARCH)/config.mk
+quiet_cmd_u-boot-spl ?= LD      $@
+      cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
 		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
-		       $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
+		       $(patsubst $(obj)/%,%,$(u-boot-spl-main))  \
+		       $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
+		       --end-group \
 		       $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
 
-$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
+$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
+		$(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
 	$(call if_changed,u-boot-spl)
 
 $(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
 
 PHONY += $(u-boot-spl-dirs)
-$(u-boot-spl-dirs):
+$(u-boot-spl-dirs): $(u-boot-spl-platdata)
 	$(Q)$(MAKE) $(build)=$@
 
 quiet_cmd_cpp_lds = LDS     $@
diff --git a/test/py/conftest.py b/test/py/conftest.py
index 5b16456e6b..5b3a92316b 100644
--- a/test/py/conftest.py
+++ b/test/py/conftest.py
@@ -193,7 +193,7 @@ def pytest_configure(config):
     for v in env_vars:
         os.environ['U_BOOT_' + v.upper()] = getattr(ubconfig, v)
 
-    if board_type == 'sandbox':
+    if board_type.startswith('sandbox'):
         import u_boot_console_sandbox
         console = u_boot_console_sandbox.ConsoleSandbox(log, ubconfig)
     else:
diff --git a/test/py/tests/test_ofplatdata.py b/test/py/tests/test_ofplatdata.py
new file mode 100644
index 0000000000..c8b309e3d2
--- /dev/null
+++ b/test/py/tests/test_ofplatdata.py
@@ -0,0 +1,42 @@
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+import pytest
+
+OF_PLATDATA_OUTPUT = '''
+of-platdata probe:
+bool 1
+byte 05
+bytearray 06 00 00
+int 1
+intarray 2 3 4 0
+longbytearray 09 0a 0b 0c 0d 0e 0f 10 11
+string message
+stringarray "multi-word" "message" ""
+of-platdata probe:
+bool 0
+byte 08
+bytearray 01 23 34
+int 3
+intarray 5 0 0 0
+longbytearray 09 00 00 00 00 00 00 00 00
+string message2
+stringarray "another" "multi-word" "message"
+of-platdata probe:
+bool 0
+byte 00
+bytearray 00 00 00
+int 0
+intarray 0 0 0 0
+longbytearray 00 00 00 00 00 00 00 00 00
+string <NULL>
+stringarray "one" "" ""
+'''
+
+@pytest.mark.buildconfigspec('spl')
+def test_ofplatdata(u_boot_console):
+    """Test that of-platdata can be generated and used in sandbox"""
+    cons = u_boot_console
+    output = cons.get_spawn_output().replace('\r', '')
+    assert OF_PLATDATA_OUTPUT in output
diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py
index b5aad7cb94..4606ad48bf 100644
--- a/test/py/u_boot_console_base.py
+++ b/test/py/u_boot_console_base.py
@@ -345,7 +345,7 @@ class ConsoleBase(object):
                 m = self.p.expect([pattern_u_boot_spl_signon] +
                                   self.bad_patterns)
                 if m != 0:
-                    raise Exception('Bad pattern found on console: ' +
+                    raise Exception('Bad pattern found on SPL console: ' +
                                     self.bad_pattern_ids[m - 1])
             m = self.p.expect([pattern_u_boot_main_signon] + self.bad_patterns)
             if m != 0:
@@ -393,6 +393,16 @@ class ConsoleBase(object):
             pass
         self.p = None
 
+    def get_spawn_output(self):
+        """Return the start-up output from U-Boot
+
+        Returns:
+            The output produced by ensure_spawed(), as a string.
+        """
+        if self.p:
+            return self.p.get_expect_output()
+        return None
+
     def validate_version_string_in_text(self, text):
         """Assert that a command's output includes the U-Boot signon message.
 
diff --git a/test/py/u_boot_console_sandbox.py b/test/py/u_boot_console_sandbox.py
index b4404971c4..647e1f879f 100644
--- a/test/py/u_boot_console_sandbox.py
+++ b/test/py/u_boot_console_sandbox.py
@@ -39,11 +39,15 @@ class ConsoleSandbox(ConsoleBase):
             A u_boot_spawn.Spawn object that is attached to U-Boot.
         """
 
+        bcfg = self.config.buildconfig
+        config_spl = bcfg.get('config_spl', 'n') == 'y'
+        fname = '/spl/u-boot-spl' if config_spl else '/u-boot'
+        print fname
         cmd = []
         if self.config.gdbserver:
             cmd += ['gdbserver', self.config.gdbserver]
         cmd += [
-            self.config.build_dir + '/u-boot',
+            self.config.build_dir + fname,
             '-v',
             '-d',
             self.config.dtb
diff --git a/test/py/u_boot_spawn.py b/test/py/u_boot_spawn.py
index d15517389e..3a0fbfad90 100644
--- a/test/py/u_boot_spawn.py
+++ b/test/py/u_boot_spawn.py
@@ -18,6 +18,9 @@ class Timeout(Exception):
 class Spawn(object):
     """Represents the stdio of a freshly created sub-process. Commands may be
     sent to the process, and responses waited for.
+
+    Members:
+        output: accumulated output from expect()
     """
 
     def __init__(self, args, cwd=None):
@@ -34,6 +37,7 @@ class Spawn(object):
 
         self.waited = False
         self.buf = ''
+        self.output = ''
         self.logfile_read = None
         self.before = ''
         self.after = ''
@@ -154,6 +158,7 @@ class Spawn(object):
                     posafter = earliest_m.end()
                     self.before = self.buf[:pos]
                     self.after = self.buf[pos:posafter]
+                    self.output += self.buf[:posafter]
                     self.buf = self.buf[posafter:]
                     return earliest_pi
                 tnow_s = time.time()
@@ -198,3 +203,11 @@ class Spawn(object):
             if not self.isalive():
                 break
             time.sleep(0.1)
+
+    def get_expect_output(self):
+        """Return the output read by expect()
+
+        Returns:
+            The output processed by expect(), as a string.
+        """
+        return self.output
diff --git a/tools/Makefile b/tools/Makefile
index f72294a98a..421414bc15 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -107,6 +107,20 @@ mkimage-objs   := $(dumpimage-mkimage-objs) mkimage.o
 fit_info-objs   := $(dumpimage-mkimage-objs) fit_info.o
 fit_check_sign-objs   := $(dumpimage-mkimage-objs) fit_check_sign.o
 
+# Build a libfdt Python module if swig is available
+# Use 'sudo apt-get install swig libpython-dev' to enable this
+hostprogs-$(CONFIG_SPL_OF_PLATDATA) += \
+	$(if $(shell which swig),_libfdt.so)
+_libfdt.so-sharedobjs += $(LIBFDT_OBJS)
+libfdt:
+
+tools/_libfdt.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) tools/libfdt_wrap.c
+	python $(srctree)/lib/libfdt/setup.py "$(_hostc_flags)" $^
+	mv _libfdt.so $@
+
+tools/libfdt_wrap.c: $(srctree)/lib/libfdt/libfdt.swig
+	swig -python -o $@ $<
+
 # TODO(sjg@chromium.org): Is this correct on Mac OS?
 
 ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
diff --git a/tools/dtoc/.gitignore b/tools/dtoc/.gitignore
new file mode 100644
index 0000000000..0d20b6487c
--- /dev/null
+++ b/tools/dtoc/.gitignore
@@ -0,0 +1 @@
+*.pyc
diff --git a/tools/dtoc/dtoc b/tools/dtoc/dtoc
new file mode 120000
index 0000000000..896ca44e62
--- /dev/null
+++ b/tools/dtoc/dtoc
@@ -0,0 +1 @@
+dtoc.py
\ No newline at end of file
diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py
new file mode 100755
index 0000000000..ec80abe717
--- /dev/null
+++ b/tools/dtoc/dtoc.py
@@ -0,0 +1,394 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+import copy
+from optparse import OptionError, OptionParser
+import os
+import sys
+
+import fdt_util
+
+# Bring in the patman libraries
+our_path = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(our_path, '../patman'))
+
+# Bring in either the normal fdt library (which relies on libfdt) or the
+# fallback one (which uses fdtget and is slower). Both provide the same
+# interfface for this file to use.
+try:
+    from fdt import Fdt
+    import fdt
+    have_libfdt = True
+except ImportError:
+    have_libfdt = False
+    from fdt_fallback import Fdt
+    import fdt_fallback as fdt
+
+import struct
+
+# When we see these properties we ignore them - i.e. do not create a structure member
+PROP_IGNORE_LIST = [
+    '#address-cells',
+    '#gpio-cells',
+    '#size-cells',
+    'compatible',
+    'linux,phandle',
+    "status",
+    'phandle',
+    'u-boot,dm-pre-reloc',
+]
+
+# C type declarations for the tyues we support
+TYPE_NAMES = {
+    fdt_util.TYPE_INT: 'fdt32_t',
+    fdt_util.TYPE_BYTE: 'unsigned char',
+    fdt_util.TYPE_STRING: 'const char *',
+    fdt_util.TYPE_BOOL: 'bool',
+};
+
+STRUCT_PREFIX = 'dtd_'
+VAL_PREFIX = 'dtv_'
+
+def Conv_name_to_c(name):
+    """Convert a device-tree name to a C identifier
+
+    Args:
+        name:   Name to convert
+    Return:
+        String containing the C version of this name
+    """
+    str = name.replace('@', '_at_')
+    str = str.replace('-', '_')
+    str = str.replace(',', '_')
+    str = str.replace('/', '__')
+    return str
+
+def TabTo(num_tabs, str):
+    if len(str) >= num_tabs * 8:
+        return str + ' '
+    return str + '\t' * (num_tabs - len(str) / 8)
+
+class DtbPlatdata:
+    """Provide a means to convert device tree binary data to platform data
+
+    The output of this process is C structures which can be used in space-
+    constrained encvironments where the ~3KB code overhead of device tree
+    code is not affordable.
+
+    Properties:
+        fdt: Fdt object, referencing the device tree
+        _dtb_fname: Filename of the input device tree binary file
+        _valid_nodes: A list of Node object with compatible strings
+        _options: Command-line options
+        _phandle_node: A dict of nodes indexed by phandle number (1, 2...)
+        _outfile: The current output file (sys.stdout or a real file)
+        _lines: Stashed list of output lines for outputting in the future
+        _phandle_node: A dict of Nodes indexed by phandle (an integer)
+    """
+    def __init__(self, dtb_fname, options):
+        self._dtb_fname = dtb_fname
+        self._valid_nodes = None
+        self._options = options
+        self._phandle_node = {}
+        self._outfile = None
+        self._lines = []
+
+    def SetupOutput(self, fname):
+        """Set up the output destination
+
+        Once this is done, future calls to self.Out() will output to this
+        file.
+
+        Args:
+            fname: Filename to send output to, or '-' for stdout
+        """
+        if fname == '-':
+            self._outfile = sys.stdout
+        else:
+            self._outfile = open(fname, 'w')
+
+    def Out(self, str):
+        """Output a string to the output file
+
+        Args:
+            str: String to output
+        """
+        self._outfile.write(str)
+
+    def Buf(self, str):
+        """Buffer up a string to send later
+
+        Args:
+            str: String to add to our 'buffer' list
+        """
+        self._lines.append(str)
+
+    def GetBuf(self):
+        """Get the contents of the output buffer, and clear it
+
+        Returns:
+            The output buffer, which is then cleared for future use
+        """
+        lines = self._lines
+        self._lines = []
+        return lines
+
+    def GetValue(self, type, value):
+        """Get a value as a C expression
+
+        For integers this returns a byte-swapped (little-endian) hex string
+        For bytes this returns a hex string, e.g. 0x12
+        For strings this returns a literal string enclosed in quotes
+        For booleans this return 'true'
+
+        Args:
+            type: Data type (fdt_util)
+            value: Data value, as a string of bytes
+        """
+        if type == fdt_util.TYPE_INT:
+            return '%#x' % fdt_util.fdt32_to_cpu(value)
+        elif type == fdt_util.TYPE_BYTE:
+            return '%#x' % ord(value[0])
+        elif type == fdt_util.TYPE_STRING:
+            return '"%s"' % value
+        elif type == fdt_util.TYPE_BOOL:
+            return 'true'
+
+    def GetCompatName(self, node):
+        """Get a node's first compatible string as a C identifier
+
+        Args:
+            node: Node object to check
+        Return:
+            C identifier for the first compatible string
+        """
+        compat = node.props['compatible'].value
+        if type(compat) == list:
+            compat = compat[0]
+        return Conv_name_to_c(compat)
+
+    def ScanDtb(self):
+        """Scan the device tree to obtain a tree of notes and properties
+
+        Once this is done, self.fdt.GetRoot() can be called to obtain the
+        device tree root node, and progress from there.
+        """
+        self.fdt = Fdt(self._dtb_fname)
+        self.fdt.Scan()
+
+    def ScanTree(self):
+        """Scan the device tree for useful information
+
+        This fills in the following properties:
+            _phandle_node: A dict of Nodes indexed by phandle (an integer)
+            _valid_nodes: A list of nodes we wish to consider include in the
+                platform data
+        """
+        node_list = []
+        self._phandle_node = {}
+        for node in self.fdt.GetRoot().subnodes:
+            if 'compatible' in node.props:
+                status = node.props.get('status')
+                if (not options.include_disabled and not status or
+                    status.value != 'disabled'):
+                    node_list.append(node)
+                    phandle_prop = node.props.get('phandle')
+                    if phandle_prop:
+                        phandle = phandle_prop.GetPhandle()
+                        self._phandle_node[phandle] = node
+
+        self._valid_nodes = node_list
+
+    def IsPhandle(self, prop):
+        """Check if a node contains phandles
+
+        We have no reliable way of detecting whether a node uses a phandle
+        or not. As an interim measure, use a list of known property names.
+
+        Args:
+            prop: Prop object to check
+        Return:
+            True if the object value contains phandles, else False
+        """
+        if prop.name in ['clocks']:
+            return True
+        return False
+
+    def ScanStructs(self):
+        """Scan the device tree building up the C structures we will use.
+
+        Build a dict keyed by C struct name containing a dict of Prop
+        object for each struct field (keyed by property name). Where the
+        same struct appears multiple times, try to use the 'widest'
+        property, i.e. the one with a type which can express all others.
+
+        Once the widest property is determined, all other properties are
+        updated to match that width.
+        """
+        structs = {}
+        for node in self._valid_nodes:
+            node_name = self.GetCompatName(node)
+            fields = {}
+
+            # Get a list of all the valid properties in this node.
+            for name, prop in node.props.iteritems():
+                if name not in PROP_IGNORE_LIST and name[0] != '#':
+                    fields[name] = copy.deepcopy(prop)
+
+            # If we've seen this node_name before, update the existing struct.
+            if node_name in structs:
+                struct = structs[node_name]
+                for name, prop in fields.iteritems():
+                    oldprop = struct.get(name)
+                    if oldprop:
+                        oldprop.Widen(prop)
+                    else:
+                        struct[name] = prop
+
+            # Otherwise store this as a new struct.
+            else:
+                structs[node_name] = fields
+
+        upto = 0
+        for node in self._valid_nodes:
+            node_name = self.GetCompatName(node)
+            struct = structs[node_name]
+            for name, prop in node.props.iteritems():
+                if name not in PROP_IGNORE_LIST and name[0] != '#':
+                    prop.Widen(struct[name])
+            upto += 1
+        return structs
+
+    def GenerateStructs(self, structs):
+        """Generate struct defintions for the platform data
+
+        This writes out the body of a header file consisting of structure
+        definitions for node in self._valid_nodes. See the documentation in
+        README.of-plat for more information.
+        """
+        self.Out('#include <stdbool.h>\n')
+        self.Out('#include <libfdt.h>\n')
+
+        # Output the struct definition
+        for name in sorted(structs):
+            self.Out('struct %s%s {\n' % (STRUCT_PREFIX, name));
+            for pname in sorted(structs[name]):
+                prop = structs[name][pname]
+                if self.IsPhandle(prop):
+                    # For phandles, include a reference to the target
+                    self.Out('\t%s%s[%d]' % (TabTo(2, 'struct phandle_2_cell'),
+                                             Conv_name_to_c(prop.name),
+                                             len(prop.value) / 2))
+                else:
+                    ptype = TYPE_NAMES[prop.type]
+                    self.Out('\t%s%s' % (TabTo(2, ptype),
+                                         Conv_name_to_c(prop.name)))
+                    if type(prop.value) == list:
+                        self.Out('[%d]' % len(prop.value))
+                self.Out(';\n')
+            self.Out('};\n')
+
+    def GenerateTables(self):
+        """Generate device defintions for the platform data
+
+        This writes out C platform data initialisation data and
+        U_BOOT_DEVICE() declarations for each valid node. See the
+        documentation in README.of-plat for more information.
+        """
+        self.Out('#include <common.h>\n')
+        self.Out('#include <dm.h>\n')
+        self.Out('#include <dt-structs.h>\n')
+        self.Out('\n')
+        node_txt_list = []
+        for node in self._valid_nodes:
+            struct_name = self.GetCompatName(node)
+            var_name = Conv_name_to_c(node.name)
+            self.Buf('static struct %s%s %s%s = {\n' %
+                (STRUCT_PREFIX, struct_name, VAL_PREFIX, var_name))
+            for pname, prop in node.props.iteritems():
+                if pname in PROP_IGNORE_LIST or pname[0] == '#':
+                    continue
+                ptype = TYPE_NAMES[prop.type]
+                member_name = Conv_name_to_c(prop.name)
+                self.Buf('\t%s= ' % TabTo(3, '.' + member_name))
+
+                # Special handling for lists
+                if type(prop.value) == list:
+                    self.Buf('{')
+                    vals = []
+                    # For phandles, output a reference to the platform data
+                    # of the target node.
+                    if self.IsPhandle(prop):
+                        # Process the list as pairs of (phandle, id)
+                        it = iter(prop.value)
+                        for phandle_cell, id_cell in zip(it, it):
+                            phandle = fdt_util.fdt32_to_cpu(phandle_cell)
+                            id = fdt_util.fdt32_to_cpu(id_cell)
+                            target_node = self._phandle_node[phandle]
+                            name = Conv_name_to_c(target_node.name)
+                            vals.append('{&%s%s, %d}' % (VAL_PREFIX, name, id))
+                    else:
+                        for val in prop.value:
+                            vals.append(self.GetValue(prop.type, val))
+                    self.Buf(', '.join(vals))
+                    self.Buf('}')
+                else:
+                    self.Buf(self.GetValue(prop.type, prop.value))
+                self.Buf(',\n')
+            self.Buf('};\n')
+
+            # Add a device declaration
+            self.Buf('U_BOOT_DEVICE(%s) = {\n' % var_name)
+            self.Buf('\t.name\t\t= "%s",\n' % struct_name)
+            self.Buf('\t.platdata\t= &%s%s,\n' % (VAL_PREFIX, var_name))
+            self.Buf('\t.platdata_size\t= sizeof(%s%s),\n' %
+                     (VAL_PREFIX, var_name))
+            self.Buf('};\n')
+            self.Buf('\n')
+
+            # Output phandle target nodes first, since they may be referenced
+            # by others
+            if 'phandle' in node.props:
+                self.Out(''.join(self.GetBuf()))
+            else:
+                node_txt_list.append(self.GetBuf())
+
+        # Output all the nodes which are not phandle targets themselves, but
+        # may reference them. This avoids the need for forward declarations.
+        for node_txt in node_txt_list:
+            self.Out(''.join(node_txt))
+
+
+if __name__ != "__main__":
+    pass
+
+parser = OptionParser()
+parser.add_option('-d', '--dtb-file', action='store',
+                  help='Specify the .dtb input file')
+parser.add_option('--include-disabled', action='store_true',
+                  help='Include disabled nodes')
+parser.add_option('-o', '--output', action='store', default='-',
+                  help='Select output filename')
+(options, args) = parser.parse_args()
+
+if not args:
+    raise ValueError('Please specify a command: struct, platdata')
+
+plat = DtbPlatdata(options.dtb_file, options)
+plat.ScanDtb()
+plat.ScanTree()
+plat.SetupOutput(options.output)
+structs = plat.ScanStructs()
+
+for cmd in args[0].split(','):
+    if cmd == 'struct':
+        plat.GenerateStructs(structs)
+    elif cmd == 'platdata':
+        plat.GenerateTables()
+    else:
+        raise ValueError("Unknown command '%s': (use: struct, platdata)" % cmd)
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py
new file mode 100644
index 0000000000..1d913a925e
--- /dev/null
+++ b/tools/dtoc/fdt.py
@@ -0,0 +1,180 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+import fdt_util
+import libfdt
+import sys
+
+# This deals with a device tree, presenting it as a list of Node and Prop
+# objects, representing nodes and properties, respectively.
+#
+# This implementation uses a libfdt Python library to access the device tree,
+# so it is fairly efficient.
+
+class Prop:
+    """A device tree property
+
+    Properties:
+        name: Property name (as per the device tree)
+        value: Property value as a string of bytes, or a list of strings of
+            bytes
+        type: Value type
+    """
+    def __init__(self, name, bytes):
+        self.name = name
+        self.value = None
+        if not bytes:
+            self.type = fdt_util.TYPE_BOOL
+            self.value = True
+            return
+        self.type, self.value = fdt_util.BytesToValue(bytes)
+
+    def GetPhandle(self):
+        """Get a (single) phandle value from a property
+
+        Gets the phandle valuie from a property and returns it as an integer
+        """
+        return fdt_util.fdt32_to_cpu(self.value[:4])
+
+    def Widen(self, newprop):
+        """Figure out which property type is more general
+
+        Given a current property and a new property, this function returns the
+        one that is less specific as to type. The less specific property will
+        be ble to represent the data in the more specific property. This is
+        used for things like:
+
+            node1 {
+                compatible = "fred";
+                value = <1>;
+            };
+            node1 {
+                compatible = "fred";
+                value = <1 2>;
+            };
+
+        He we want to use an int array for 'value'. The first property
+        suggests that a single int is enough, but the second one shows that
+        it is not. Calling this function with these two propertes would
+        update the current property to be like the second, since it is less
+        specific.
+        """
+        if newprop.type < self.type:
+            self.type = newprop.type
+
+        if type(newprop.value) == list and type(self.value) != list:
+            self.value = [self.value]
+
+        if type(self.value) == list and len(newprop.value) > len(self.value):
+            val = fdt_util.GetEmpty(self.type)
+            while len(self.value) < len(newprop.value):
+                self.value.append(val)
+
+
+class Node:
+    """A device tree node
+
+    Properties:
+        offset: Integer offset in the device tree
+        name: Device tree node tname
+        path: Full path to node, along with the node name itself
+        _fdt: Device tree object
+        subnodes: A list of subnodes for this node, each a Node object
+        props: A dict of properties for this node, each a Prop object.
+            Keyed by property name
+    """
+    def __init__(self, fdt, offset, name, path):
+        self.offset = offset
+        self.name = name
+        self.path = path
+        self._fdt = fdt
+        self.subnodes = []
+        self.props = {}
+
+    def Scan(self):
+        """Scan a node's properties and subnodes
+
+        This fills in the props and subnodes properties, recursively
+        searching into subnodes so that the entire tree is built.
+        """
+        self.props = self._fdt.GetProps(self.path)
+
+        offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.offset)
+        while offset >= 0:
+            sep = '' if self.path[-1] == '/' else '/'
+            name = libfdt.Name(self._fdt.GetFdt(), offset)
+            path = self.path + sep + name
+            node = Node(self._fdt, offset, name, path)
+            self.subnodes.append(node)
+
+            node.Scan()
+            offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset)
+
+
+class Fdt:
+    """Provides simple access to a flat device tree blob.
+
+    Properties:
+      fname: Filename of fdt
+      _root: Root of device tree (a Node object)
+    """
+
+    def __init__(self, fname):
+        self.fname = fname
+        with open(fname) as fd:
+            self._fdt = fd.read()
+
+    def GetFdt(self):
+        """Get the contents of the FDT
+
+        Returns:
+            The FDT contents as a string of bytes
+        """
+        return self._fdt
+
+    def Scan(self):
+        """Scan a device tree, building up a tree of Node objects
+
+        This fills in the self._root property
+        """
+        self._root = Node(self, 0, '/', '/')
+        self._root.Scan()
+
+    def GetRoot(self):
+        """Get the root Node of the device tree
+
+        Returns:
+            The root Node object
+        """
+        return self._root
+
+    def GetProps(self, node):
+        """Get all properties from a node.
+
+        Args:
+            node: Full path to node name to look in.
+
+        Returns:
+            A dictionary containing all the properties, indexed by node name.
+            The entries are Prop objects.
+
+        Raises:
+            ValueError: if the node does not exist.
+        """
+        offset = libfdt.fdt_path_offset(self._fdt, node)
+        if offset < 0:
+            libfdt.Raise(offset)
+        props_dict = {}
+        poffset = libfdt.fdt_first_property_offset(self._fdt, offset)
+        while poffset >= 0:
+            dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, poffset)
+            prop = Prop(libfdt.String(self._fdt, dprop.nameoff), libfdt.Data(dprop))
+            props_dict[prop.name] = prop
+
+            poffset = libfdt.fdt_next_property_offset(self._fdt, poffset)
+        return props_dict
diff --git a/tools/dtoc/fdt_fallback.py b/tools/dtoc/fdt_fallback.py
new file mode 100644
index 0000000000..14decf394d
--- /dev/null
+++ b/tools/dtoc/fdt_fallback.py
@@ -0,0 +1,207 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+import command
+import fdt_util
+import sys
+
+# This deals with a device tree, presenting it as a list of Node and Prop
+# objects, representing nodes and properties, respectively.
+#
+# This implementation uses the fdtget tool to access the device tree, so it
+# is not very efficient for larger trees. The tool is called once for each
+# node and property in the tree.
+
+class Prop:
+    """A device tree property
+
+    Properties:
+        name: Property name (as per the device tree)
+        value: Property value as a string of bytes, or a list of strings of
+            bytes
+        type: Value type
+    """
+    def __init__(self, name, byte_list_str):
+        self.name = name
+        self.value = None
+        if not byte_list_str.strip():
+            self.type = fdt_util.TYPE_BOOL
+            return
+        bytes = [chr(int(byte, 16)) for byte in byte_list_str.strip().split(' ')]
+        self.type, self.value = fdt_util.BytesToValue(''.join(bytes))
+
+    def GetPhandle(self):
+        """Get a (single) phandle value from a property
+
+        Gets the phandle valuie from a property and returns it as an integer
+        """
+        return fdt_util.fdt32_to_cpu(self.value[:4])
+
+    def Widen(self, newprop):
+        """Figure out which property type is more general
+
+        Given a current property and a new property, this function returns the
+        one that is less specific as to type. The less specific property will
+        be ble to represent the data in the more specific property. This is
+        used for things like:
+
+            node1 {
+                compatible = "fred";
+                value = <1>;
+            };
+            node1 {
+                compatible = "fred";
+                value = <1 2>;
+            };
+
+        He we want to use an int array for 'value'. The first property
+        suggests that a single int is enough, but the second one shows that
+        it is not. Calling this function with these two propertes would
+        update the current property to be like the second, since it is less
+        specific.
+        """
+        if newprop.type < self.type:
+            self.type = newprop.type
+
+        if type(newprop.value) == list and type(self.value) != list:
+            self.value = newprop.value
+
+class Node:
+    """A device tree node
+
+    Properties:
+        name: Device tree node tname
+        path: Full path to node, along with the node name itself
+        _fdt: Device tree object
+        subnodes: A list of subnodes for this node, each a Node object
+        props: A dict of properties for this node, each a Prop object.
+            Keyed by property name
+    """
+    def __init__(self, fdt, name, path):
+        self.name = name
+        self.path = path
+        self._fdt = fdt
+        self.subnodes = []
+        self.props = {}
+
+    def Scan(self):
+        """Scan a node's properties and subnodes
+
+        This fills in the props and subnodes properties, recursively
+        searching into subnodes so that the entire tree is built.
+        """
+        for name, byte_list_str in self._fdt.GetProps(self.path).iteritems():
+            prop = Prop(name, byte_list_str)
+            self.props[name] = prop
+
+        for name in self._fdt.GetSubNodes(self.path):
+            sep = '' if self.path[-1] == '/' else '/'
+            path = self.path + sep + name
+            node = Node(self._fdt, name, path)
+            self.subnodes.append(node)
+
+            node.Scan()
+
+
+class Fdt:
+    """Provides simple access to a flat device tree blob.
+
+    Properties:
+      fname: Filename of fdt
+      _root: Root of device tree (a Node object)
+    """
+
+    def __init__(self, fname):
+        self.fname = fname
+
+    def Scan(self):
+        """Scan a device tree, building up a tree of Node objects
+
+        This fills in the self._root property
+        """
+        self._root = Node(self, '/', '/')
+        self._root.Scan()
+
+    def GetRoot(self):
+        """Get the root Node of the device tree
+
+        Returns:
+            The root Node object
+        """
+        return self._root
+
+    def GetSubNodes(self, node):
+        """Returns a list of sub-nodes of a given node
+
+        Args:
+            node: Node name to return children from
+
+        Returns:
+            List of children in the node (each a string node name)
+
+        Raises:
+            CmdError: if the node does not exist.
+        """
+        out = command.Output('fdtget', self.fname, '-l', node)
+        return out.strip().splitlines()
+
+    def GetProps(self, node, convert_dashes=False):
+        """Get all properties from a node
+
+        Args:
+            node: full path to node name to look in
+            convert_dashes: True to convert - to _ in node names
+
+        Returns:
+            A dictionary containing all the properties, indexed by node name.
+            The entries are simply strings - no decoding of lists or numbers
+            is done.
+
+        Raises:
+            CmdError: if the node does not exist.
+        """
+        out = command.Output('fdtget', self.fname, node, '-p')
+        props = out.strip().splitlines()
+        props_dict = {}
+        for prop in props:
+            name = prop
+            if convert_dashes:
+                prop = re.sub('-', '_', prop)
+            props_dict[prop] = self.GetProp(node, name)
+        return props_dict
+
+    def GetProp(self, node, prop, default=None, typespec=None):
+        """Get a property from a device tree.
+
+        This looks up the given node and property, and returns the value as a
+        string,
+
+        If the node or property does not exist, this will return the default
+        value.
+
+        Args:
+            node: Full path to node to look up.
+            prop: Property name to look up.
+            default: Default value to return if nothing is present in the fdt,
+                or None to raise in this case. This will be converted to a
+                string.
+            typespec: Type character to use (None for default, 's' for string)
+
+        Returns:
+            string containing the property value.
+
+        Raises:
+            CmdError: if the property does not exist and no default is provided.
+        """
+        args = [self.fname, node, prop, '-t', 'bx']
+        if default is not None:
+          args += ['-d', str(default)]
+        if typespec is not None:
+          args += ['-t%s' % typespec]
+        out = command.Output('fdtget', *args)
+        return out.strip()
diff --git a/tools/dtoc/fdt_util.py b/tools/dtoc/fdt_util.py
new file mode 100644
index 0000000000..929b524fcf
--- /dev/null
+++ b/tools/dtoc/fdt_util.py
@@ -0,0 +1,86 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+import struct
+
+# A list of types we support
+(TYPE_BYTE, TYPE_INT, TYPE_STRING, TYPE_BOOL) = range(4)
+
+def BytesToValue(bytes):
+    """Converts a string of bytes into a type and value
+
+    Args:
+        A string containing bytes
+
+    Return:
+        A tuple:
+            Type of data
+            Data, either a single element or a list of elements. Each element
+            is one of:
+                TYPE_STRING: string value from the property
+                TYPE_INT: a byte-swapped integer stored as a 4-byte string
+                TYPE_BYTE: a byte stored as a single-byte string
+    """
+    size = len(bytes)
+    strings = bytes.split('\0')
+    is_string = True
+    count = len(strings) - 1
+    if count > 0 and not strings[-1]:
+        for string in strings[:-1]:
+            if not string:
+                is_string = False
+                break
+            for ch in string:
+                if ch < ' ' or ch > '~':
+                    is_string = False
+                    break
+    else:
+        is_string = False
+    if is_string:
+        if count == 1:
+            return TYPE_STRING, strings[0]
+        else:
+            return TYPE_STRING, strings[:-1]
+    if size % 4:
+        if size == 1:
+            return TYPE_BYTE, bytes[0]
+        else:
+            return TYPE_BYTE, list(bytes)
+    val = []
+    for i in range(0, size, 4):
+        val.append(bytes[i:i + 4])
+    if size == 4:
+        return TYPE_INT, val[0]
+    else:
+        return TYPE_INT, val
+
+def GetEmpty(type):
+    """Get an empty / zero value of the given type
+
+    Returns:
+        A single value of the given type
+    """
+    if type == TYPE_BYTE:
+        return chr(0)
+    elif type == TYPE_INT:
+        return struct.pack('<I', 0);
+    elif type == TYPE_STRING:
+        return ''
+    else:
+        return True
+
+def fdt32_to_cpu(val):
+    """Convert a device tree cell to an integer
+
+    Args:
+        Value to convert (4-character string representing the cell value)
+
+    Return:
+        A native-endian integer value
+    """
+    return struct.unpack(">I", val)[0]