Merge branch '2020-05-06-master-imports'

- ARM Juno updates
- Assorted bugfixes

17 files changed, 200 insertions, 91 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b494bcae95..0d463088a2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1162,6 +1162,17 @@ config TARGET_VEXPRESS64_JUNO
 	bool "Support Versatile Express Juno Development Platform"
 	select ARM64
 	select PL01X_SERIAL
+	select DM
+	select OF_CONTROL
+	select OF_BOARD
+	select CLK
+	select DM_SERIAL
+	select ARM_PSCI_FW
+	select PSCI_RESET
+	select DM
+	select BLK
+	select USB
+	select DM_USB
 
 config TARGET_LS2080A_EMU
 	bool "Support ls2080a_emu"
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 44dde26065..224f2aef14 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -75,6 +75,15 @@ static unsigned long noncached_start;
 static unsigned long noncached_end;
 static unsigned long noncached_next;
 
+void noncached_set_region(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	mmu_set_region_dcache_behaviour(noncached_start,
+					noncached_end - noncached_start,
+					DCACHE_OFF);
+#endif
+}
+
 void noncached_init(void)
 {
 	phys_addr_t start, end;
@@ -91,9 +100,7 @@ void noncached_init(void)
 	noncached_end = end;
 	noncached_next = start;
 
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-	mmu_set_region_dcache_behaviour(noncached_start, size, DCACHE_OFF);
-#endif
+	noncached_set_region();
 }
 
 phys_addr_t noncached_alloc(size_t size, size_t align)
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index 9014418433..1d13f542e6 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -9,4 +9,11 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "vexpress_aemv8a"
 
+config JUNO_DTB_PART
+	string "NOR flash partition holding DTB"
+	default "board.dtb"
+	help
+	  The ARM partition name in the NOR flash memory holding the
+	  device tree blob to configure U-Boot.
+
 endif
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index dd0ebdd303..5c7a8f55f0 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -82,9 +82,64 @@ int dram_init_banksize(void)
 	return 0;
 }
 
-/*
- * Board specific reset that is system reset.
- */
+#ifdef CONFIG_OF_BOARD
+#define JUNO_FLASH_SEC_SIZE	(256 * 1024)
+static phys_addr_t find_dtb_in_nor_flash(const char *partname)
+{
+	phys_addr_t sector = CONFIG_SYS_FLASH_BASE;
+	int i;
+
+	for (i = 0;
+	     i < CONFIG_SYS_MAX_FLASH_SECT;
+	     i++, sector += JUNO_FLASH_SEC_SIZE) {
+		int len = strlen(partname) + 1;
+		int offs;
+		phys_addr_t imginfo;
+		u32 reg;
+
+		reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x04);
+                /* This makes up the string "HSLFTOOF" flash footer */
+		if (reg != 0x464F4F54U)
+			continue;
+		reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x08);
+                if (reg != 0x464C5348U)
+			continue;
+
+		for (offs = 0; offs < 32; offs += 4, len -= 4) {
+			reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x30 + offs);
+			if (strncmp(partname + offs, (char *)&reg,
+			            len > 4 ? 4 : len))
+				break;
+
+			if (len > 4)
+				continue;
+
+			reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x10);
+			imginfo = sector + JUNO_FLASH_SEC_SIZE - 0x30 - reg;
+			reg = readl(imginfo + 0x54);
+
+			return CONFIG_SYS_FLASH_BASE +
+			       reg * JUNO_FLASH_SEC_SIZE;
+		}
+	}
+
+	printf("No DTB found\n");
+
+	return ~0;
+}
+
+void *board_fdt_blob_setup(void)
+{
+	phys_addr_t fdt_rom_addr = find_dtb_in_nor_flash(CONFIG_JUNO_DTB_PART);
+
+	if (fdt_rom_addr == ~0UL)
+		return NULL;
+
+	return (void *)fdt_rom_addr;
+}
+#endif
+
+/* Actual reset is done via PSCI. */
 void reset_cpu(ulong addr)
 {
 }
diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c
index 3dc2c854ac..f1562883f5 100644
--- a/cmd/bootmenu.c
+++ b/cmd/bootmenu.c
@@ -365,6 +365,34 @@ cleanup:
 	return NULL;
 }
 
+static void menu_display_statusline(struct menu *m)
+{
+	struct bootmenu_entry *entry;
+	struct bootmenu_data *menu;
+
+	if (menu_default_choice(m, (void *)&entry) < 0)
+		return;
+
+	menu = entry->menu;
+
+	printf(ANSI_CURSOR_POSITION, 1, 1);
+	puts(ANSI_CLEAR_LINE);
+	printf(ANSI_CURSOR_POSITION, 2, 1);
+	puts("  *** U-Boot Boot Menu ***");
+	puts(ANSI_CLEAR_LINE_TO_END);
+	printf(ANSI_CURSOR_POSITION, 3, 1);
+	puts(ANSI_CLEAR_LINE);
+
+	/* First 3 lines are bootmenu header + 2 empty lines between entries */
+	printf(ANSI_CURSOR_POSITION, menu->count + 5, 1);
+	puts(ANSI_CLEAR_LINE);
+	printf(ANSI_CURSOR_POSITION, menu->count + 6, 1);
+	puts("  Press UP/DOWN to move, ENTER to select");
+	puts(ANSI_CLEAR_LINE_TO_END);
+	printf(ANSI_CURSOR_POSITION, menu->count + 7, 1);
+	puts(ANSI_CLEAR_LINE);
+}
+
 static void bootmenu_show(int delay)
 {
 	int init = 0;
@@ -396,8 +424,9 @@ static void bootmenu_show(int delay)
 	if (!bootmenu)
 		return;
 
-	menu = menu_create(NULL, bootmenu->delay, 1, bootmenu_print_entry,
-			   bootmenu_choice_entry, bootmenu);
+	menu = menu_create(NULL, bootmenu->delay, 1, menu_display_statusline,
+			   bootmenu_print_entry, bootmenu_choice_entry,
+			   bootmenu);
 	if (!menu) {
 		bootmenu_destroy(bootmenu);
 		return;
@@ -445,34 +474,6 @@ cleanup:
 #endif
 }
 
-void menu_display_statusline(struct menu *m)
-{
-	struct bootmenu_entry *entry;
-	struct bootmenu_data *menu;
-
-	if (menu_default_choice(m, (void *)&entry) < 0)
-		return;
-
-	menu = entry->menu;
-
-	printf(ANSI_CURSOR_POSITION, 1, 1);
-	puts(ANSI_CLEAR_LINE);
-	printf(ANSI_CURSOR_POSITION, 2, 1);
-	puts("  *** U-Boot Boot Menu ***");
-	puts(ANSI_CLEAR_LINE_TO_END);
-	printf(ANSI_CURSOR_POSITION, 3, 1);
-	puts(ANSI_CLEAR_LINE);
-
-	/* First 3 lines are bootmenu header + 2 empty lines between entries */
-	printf(ANSI_CURSOR_POSITION, menu->count + 5, 1);
-	puts(ANSI_CLEAR_LINE);
-	printf(ANSI_CURSOR_POSITION, menu->count + 6, 1);
-	puts("  Press UP/DOWN to move, ENTER to select");
-	puts(ANSI_CLEAR_LINE_TO_END);
-	printf(ANSI_CURSOR_POSITION, menu->count + 7, 1);
-	puts(ANSI_CLEAR_LINE);
-}
-
 #ifdef CONFIG_AUTOBOOT_MENU_SHOW
 int menu_show(int bootdelay)
 {
diff --git a/cmd/cache.c b/cmd/cache.c
index 27dcec0931..7678615dd8 100644
--- a/cmd/cache.c
+++ b/cmd/cache.c
@@ -20,6 +20,10 @@ void __weak invalidate_icache_all(void)
 	puts("No arch specific invalidate_icache_all available!\n");
 }
 
+__weak void noncached_set_region(void)
+{
+}
+
 static int do_icache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	switch (argc) {
@@ -64,6 +68,7 @@ static int do_dcache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			break;
 		case 1:
 			dcache_enable();
+			noncached_set_region();
 			break;
 		case 2:
 			flush_dcache_all();
diff --git a/cmd/pxe_utils.c b/cmd/pxe_utils.c
index 53af04d7dc..c244bfb10d 100644
--- a/cmd/pxe_utils.c
+++ b/cmd/pxe_utils.c
@@ -1237,7 +1237,7 @@ static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
 	 * Create a menu and add items for all the labels.
 	 */
 	m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10),
-			cfg->prompt, label_print, NULL, NULL);
+			cfg->prompt, NULL, label_print, NULL, NULL);
 
 	if (!m)
 		return NULL;
diff --git a/common/menu.c b/common/menu.c
index 7b66d199a9..5fb2ffbd06 100644
--- a/common/menu.c
+++ b/common/menu.c
@@ -36,6 +36,7 @@ struct menu {
 	int timeout;
 	char *title;
 	int prompt;
+	void (*display_statusline)(struct menu *);
 	void (*item_data_print)(void *);
 	char *(*item_choice)(void *);
 	void *item_choice_data;
@@ -106,10 +107,6 @@ static inline void *menu_item_destroy(struct menu *m,
 	return NULL;
 }
 
-__weak void menu_display_statusline(struct menu *m)
-{
-}
-
 /*
  * Display a menu so the user can make a choice of an item. First display its
  * title, if any, and then each item in the menu.
@@ -120,7 +117,8 @@ static inline void menu_display(struct menu *m)
 		puts(m->title);
 		putc('\n');
 	}
-	menu_display_statusline(m);
+	if (m->display_statusline)
+		m->display_statusline(m);
 
 	menu_items_iter(m, menu_item_print, NULL);
 }
@@ -344,6 +342,9 @@ int menu_item_add(struct menu *m, char *item_key, void *item_data)
  * timeout. If 1, the user will be prompted for input regardless of the value
  * of timeout.
  *
+ * display_statusline - If not NULL, will be called to show a statusline when
+ * the menu is displayed.
+ *
  * item_data_print - If not NULL, will be called for each item when the menu
  * is displayed, with the pointer to the item's data passed as the argument.
  * If NULL, each item's key will be printed instead.  Since an item's key is
@@ -360,6 +361,7 @@ int menu_item_add(struct menu *m, char *item_key, void *item_data)
  * insufficient memory available to create the menu.
  */
 struct menu *menu_create(char *title, int timeout, int prompt,
+				void (*display_statusline)(struct menu *),
 				void (*item_data_print)(void *),
 				char *(*item_choice)(void *),
 				void *item_choice_data)
@@ -374,6 +376,7 @@ struct menu *menu_create(char *title, int timeout, int prompt,
 	m->default_item = NULL;
 	m->prompt = prompt;
 	m->timeout = timeout;
+	m->display_statusline = display_statusline;
 	m->item_data_print = item_data_print;
 	m->item_choice = item_choice;
 	m->item_choice_data = item_choice_data;
diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig
index 8628d05e68..ca7aa5ab02 100644
--- a/configs/vexpress_aemv8a_juno_defconfig
+++ b/configs/vexpress_aemv8a_juno_defconfig
@@ -10,6 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlycon=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=juno loglevel=9"
+CONFIG_OF_BOARD=y
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
@@ -26,11 +27,11 @@ CONFIG_CMD_ARMFLASH=y
 CONFIG_CMD_CACHE=y
 # CONFIG_CMD_MISC is not set
 CONFIG_CMD_UBI=y
+CONFIG_CMD_USB=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xBFC0000
-CONFIG_DM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -41,5 +42,7 @@ CONFIG_SYS_FLASH_CFI=y
 CONFIG_SMC911X=y
 CONFIG_SMC911X_BASE=0x018000000
 CONFIG_SMC911X_32_BIT=y
-CONFIG_DM_SERIAL=y
-CONFIG_OF_LIBFDT=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
diff --git a/drivers/cache/cache-l2x0.c b/drivers/cache/cache-l2x0.c
index 226824c283..a1556fbf17 100644
--- a/drivers/cache/cache-l2x0.c
+++ b/drivers/cache/cache-l2x0.c
@@ -36,6 +36,8 @@ static void l2c310_of_parse_and_init(struct udevice *dev)
 	if (dev_read_bool(dev, "arm,shared-override"))
 		saved_reg |= L310_SHARED_ATT_OVERRIDE_ENABLE;
 
+	writel(saved_reg, &regs->pl310_aux_ctrl);
+
 	saved_reg = readl(&regs->pl310_tag_latency_ctrl);
 	if (!dev_read_u32_array(dev, "arm,tag-latency", tag, 3))
 		saved_reg |= L310_LATENCY_CTRL_RD(tag[0] - 1) |
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 2a5f256184..6e5d81ce34 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -11,7 +11,10 @@
 /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
 
 #include <common.h>
+/* For get_bus_freq() */
+#include <clock_legacy.h>
 #include <dm.h>
+#include <clk.h>
 #include <errno.h>
 #include <watchdog.h>
 #include <asm/io.h>
@@ -149,21 +152,24 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
 		unsigned int remainder;
 		unsigned int fraction;
 
-		/*
-		* Set baud rate
-		*
-		* IBRD = UART_CLK / (16 * BAUD_RATE)
-		* FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE)))
-		*		/ (16 * BAUD_RATE))
-		*/
-		temp = 16 * baudrate;
-		divider = clock / temp;
-		remainder = clock % temp;
-		temp = (8 * remainder) / baudrate;
-		fraction = (temp >> 1) + (temp & 1);
-
-		writel(divider, &regs->pl011_ibrd);
-		writel(fraction, &regs->pl011_fbrd);
+		/* Without a valid clock rate we cannot set up the baudrate. */
+		if (clock) {
+			/*
+			 * Set baud rate
+			 *
+			 * IBRD = UART_CLK / (16 * BAUD_RATE)
+			 * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE)))
+			 *		/ (16 * BAUD_RATE))
+			 */
+			temp = 16 * baudrate;
+			divider = clock / temp;
+			remainder = clock % temp;
+			temp = (8 * remainder) / baudrate;
+			fraction = (temp >> 1) + (temp & 1);
+
+			writel(divider, &regs->pl011_ibrd);
+			writel(fraction, &regs->pl011_fbrd);
+		}
 
 		pl011_set_line_control(regs);
 		/* Finally, enable the UART */
@@ -337,17 +343,28 @@ static const struct udevice_id pl01x_serial_id[] ={
 	{}
 };
 
+#ifndef CONFIG_PL011_CLOCK
+#define CONFIG_PL011_CLOCK 0
+#endif
+
 int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+	struct clk clk;
 	fdt_addr_t addr;
+	int ret;
 
 	addr = devfdt_get_addr(dev);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
 	plat->base = addr;
-	plat->clock = dev_read_u32_default(dev, "clock", 1);
+	plat->clock = dev_read_u32_default(dev, "clock", CONFIG_PL011_CLOCK);
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (!ret) {
+		clk_enable(&clk);
+		plat->clock = clk_get_rate(&clk);
+	}
 	plat->type = dev_get_driver_data(dev);
 	plat->skip_init = dev_read_bool(dev, "skip-init");
 
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 4f3a792f49..3d63897054 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -7,12 +7,6 @@
 #ifndef __VEXPRESS_AEMV8A_H
 #define __VEXPRESS_AEMV8A_H
 
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
-#ifndef CONFIG_SEMIHOSTING
-#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
-#endif
-#endif
-
 #define CONFIG_REMAKE_ELF
 
 /* Link Definitions */
@@ -102,7 +96,7 @@
 
 /* PL011 Serial Configuration */
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK		7273800
+#define CONFIG_PL011_CLOCK		7372800
 #else
 #define CONFIG_PL011_CLOCK		24000000
 #endif
@@ -138,35 +132,33 @@
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 				"kernel_name=norkern\0"	\
 				"kernel_alt_name=Image\0"	\
-				"kernel_addr=0x80080000\0" \
-				"initrd_name=ramdisk.img\0"	\
-				"initrd_addr=0x84000000\0"	\
+				"kernel_addr_r=0x80080000\0" \
+				"ramdisk_name=ramdisk.img\0"	\
+				"ramdisk_addr_r=0x88000000\0"	\
 				"fdtfile=board.dtb\0" \
 				"fdt_alt_name=juno\0" \
-				"fdt_addr=0x83000000\0" \
-				"fdt_high=0xffffffffffffffff\0" \
-				"initrd_high=0xffffffffffffffff\0" \
+				"fdt_addr_r=0x80000000\0" \
 
 /* Copy the kernel and FDT to DRAM memory and boot */
-#define CONFIG_BOOTCOMMAND	"afs load ${kernel_name} ${kernel_addr} ; " \
+#define CONFIG_BOOTCOMMAND	"afs load ${kernel_name} ${kernel_addr_r} ;"\
 				"if test $? -eq 1; then "\
 				"  echo Loading ${kernel_alt_name} instead of "\
 				"${kernel_name}; "\
-				"  afs load ${kernel_alt_name} ${kernel_addr};"\
+				"  afs load ${kernel_alt_name} ${kernel_addr_r};"\
 				"fi ; "\
-				"afs load  ${fdtfile} ${fdt_addr} ; " \
+				"afs load ${fdtfile} ${fdt_addr_r} ;"\
 				"if test $? -eq 1; then "\
 				"  echo Loading ${fdt_alt_name} instead of "\
 				"${fdtfile}; "\
-				"  afs load ${fdt_alt_name} ${fdt_addr}; "\
+				"  afs load ${fdt_alt_name} ${fdt_addr_r}; "\
 				"fi ; "\
-				"fdt addr ${fdt_addr}; fdt resize; " \
-				"if afs load  ${initrd_name} ${initrd_addr} ; "\
+				"fdt addr ${fdt_addr_r}; fdt resize; " \
+				"if afs load  ${ramdisk_name} ${ramdisk_addr_r} ; "\
 				"then "\
-				"  setenv initrd_param ${initrd_addr}; "\
-				"  else setenv initrd_param -; "\
+				"  setenv ramdisk_param ${ramdisk_addr_r}; "\
+				"  else setenv ramdisk_param -; "\
 				"fi ; " \
-				"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
+				"booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}"
 
 
 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
@@ -221,6 +213,11 @@
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 
+#ifdef CONFIG_USB_EHCI_HCD
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#endif
+
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
 #define FLASH_MAX_SECTOR_SIZE		0x00040000
 
diff --git a/include/eeprom.h b/include/eeprom.h
index 79118eb83d..6820844cea 100644
--- a/include/eeprom.h
+++ b/include/eeprom.h
@@ -7,7 +7,7 @@
 #ifndef __EEPROM_LEGACY_H
 #define __EEPROM_LEGACY_H
 
-#ifdef CONFIG_CMD_EEPROM
+#if defined(CONFIG_CMD_EEPROM) || defined(CONFIG_ENV_IS_IN_EEPROM)
 void eeprom_init(int bus);
 int eeprom_read(uint dev_addr, uint offset, uchar *buffer, uint cnt);
 int eeprom_write(uint dev_addr, uint offset, uchar *buffer, uint cnt);
@@ -17,8 +17,8 @@ int eeprom_write(uint dev_addr, uint offset, uchar *buffer, uint cnt);
  * some macros here so we don't have to touch every one of those uses
  */
 #define eeprom_init(bus)
-#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
-#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
+#define eeprom_read(dev_addr, offset, buffer, cnt) (-ENOSYS)
+#define eeprom_write(dev_addr, offset, buffer, cnt) (-ENOSYS)
 #endif
 
 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
diff --git a/include/menu.h b/include/menu.h
index 2d227c20bd..9ab9b21ebb 100644
--- a/include/menu.h
+++ b/include/menu.h
@@ -9,6 +9,7 @@
 struct menu;
 
 struct menu *menu_create(char *title, int timeout, int prompt,
+				void (*display_statusline)(struct menu *),
 				void (*item_data_print)(void *),
 				char *(*item_choice)(void *),
 				void *item_choice_data);
@@ -16,7 +17,6 @@ int menu_default_set(struct menu *m, char *item_key);
 int menu_get_choice(struct menu *m, void **choice);
 int menu_item_add(struct menu *m, char *item_key, void *item_data);
 int menu_destroy(struct menu *m);
-void menu_display_statusline(struct menu *m);
 int menu_default_choice(struct menu *m, void **choice);
 
 /**
diff --git a/lib/rsa/rsa-mod-exp.c b/lib/rsa/rsa-mod-exp.c
index 420ab2eba0..62b2557cc2 100644
--- a/lib/rsa/rsa-mod-exp.c
+++ b/lib/rsa/rsa-mod-exp.c
@@ -262,8 +262,8 @@ int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len,
 	if (!prop->public_exponent)
 		key.exponent = RSA_DEFAULT_PUBEXP;
 	else
-		key.exponent =
-			fdt64_to_cpu(*((uint64_t *)(prop->public_exponent)));
+		rsa_convert_big_endian((uint32_t *)&key.exponent,
+				       prop->public_exponent, 2);
 
 	if (!key.len || !prop->modulus || !prop->rr) {
 		debug("%s: Missing RSA key info", __func__);
diff --git a/scripts/get_default_envs.sh b/scripts/get_default_envs.sh
index da86a9d69c..d1f2ce4d5c 100755
--- a/scripts/get_default_envs.sh
+++ b/scripts/get_default_envs.sh
@@ -35,7 +35,7 @@ cp ${env_obj_file_path} ${ENV_OBJ_FILE_COPY}
 ${OBJCOPY} -O binary -j ".rodata.default_environment" ${ENV_OBJ_FILE_COPY}
 
 # Replace default '\0' with '\n' and sort entries
-tr '\0' '\n' < ${ENV_OBJ_FILE_COPY} | sort -u
+tr '\0' '\n' < ${ENV_OBJ_FILE_COPY} | sort --field-separator== -k1,1 --stable
 
 rm ${ENV_OBJ_FILE_COPY}
 
diff --git a/tools/fit_image.c b/tools/fit_image.c
index 1e0f1e9fce..88ff093d05 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -435,7 +435,7 @@ static int fit_extract_data(struct image_tool_params *params, const char *fname)
 	int image_number;
 	int align_size;
 
-	align_size = params->bl_len ? params->bl_len : 1;
+	align_size = params->bl_len ? params->bl_len : 4;
 	fd = mmap_fdt(params->cmdname, fname, 0, &fdt, &sbuf, false, false);
 	if (fd < 0)
 		return -EIO;
@@ -493,6 +493,7 @@ static int fit_extract_data(struct image_tool_params *params, const char *fname)
 	fdt_pack(fdt);
 
 	new_size = fdt_totalsize(fdt);
+	new_size = ALIGN(new_size, align_size);
 	fdt_set_totalsize(fdt, new_size);
 	debug("Size reduced from %x to %x\n", fit_size, fdt_totalsize(fdt));
 	debug("External data size %x\n", buf_ptr);