xhci: mediatek: Add support for MTK xHCI host controller

This patch is used to support the on-chip xHCI controller on
MediaTek SoCs, currently control/bulk/interrupt transfers are
supported.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

5 files changed, 323 insertions, 0 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 94ac969058..2f381dc958 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -30,6 +30,12 @@ config USB_XHCI_DWC3_OF_SIMPLE
 	  Support USB2/3 functionality in simple SoC integrations with
 	  USB controller based on the DesignWare USB3 IP Core.
 
+config USB_XHCI_MTK
+	bool "Support for MediaTek on-chip xHCI USB controller"
+	depends on ARCH_MEDIATEK
+	help
+	  Enables support for the on-chip xHCI controller on MediaTek SoCs.
+
 config USB_XHCI_MVEBU
 	bool "MVEBU USB 3.0 support"
 	default y
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b62f346094..e8e3b17e42 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
 obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
+obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
 obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
 obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
 obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
new file mode 100644
index 0000000000..8ff71854fc
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek, Inc.
+ * Authors: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <usb.h>
+#include <linux/errno.h>
+#include <linux/compat.h>
+#include <power/regulator.h>
+#include <linux/iopoll.h>
+#include <usb/xhci.h>
+
+/* IPPC (IP Port Control) registers */
+#define IPPC_IP_PW_CTRL0		0x00
+#define CTRL0_IP_SW_RST			BIT(0)
+
+#define IPPC_IP_PW_CTRL1		0x04
+#define CTRL1_IP_HOST_PDN		BIT(0)
+
+#define IPPC_IP_PW_STS1			0x10
+#define STS1_IP_SLEEP_STS		BIT(30)
+#define STS1_U3_MAC_RST			BIT(16)
+#define STS1_XHCI_RST			BIT(11)
+#define STS1_SYS125_RST			BIT(10)
+#define STS1_REF_RST			BIT(8)
+#define STS1_SYSPLL_STABLE		BIT(0)
+
+#define IPPC_IP_XHCI_CAP		0x24
+#define CAP_U3_PORT_NUM(p)		((p) & 0xff)
+#define CAP_U2_PORT_NUM(p)		(((p) >> 8) & 0xff)
+
+#define IPPC_U3_CTRL_0P			0x30
+#define CTRL_U3_PORT_HOST_SEL		BIT(2)
+#define CTRL_U3_PORT_PDN		BIT(1)
+#define CTRL_U3_PORT_DIS		BIT(0)
+
+#define IPPC_U2_CTRL_0P			0x50
+#define CTRL_U2_PORT_HOST_SEL		BIT(2)
+#define CTRL_U2_PORT_PDN		BIT(1)
+#define CTRL_U2_PORT_DIS		BIT(0)
+
+#define IPPC_U3_CTRL(p)	(IPPC_U3_CTRL_0P + ((p) * 0x08))
+#define IPPC_U2_CTRL(p)	(IPPC_U2_CTRL_0P + ((p) * 0x08))
+
+struct mtk_xhci {
+	struct xhci_ctrl ctrl;	/* Needs to come first in this struct! */
+	struct xhci_hccr *hcd;
+	void __iomem *ippc;
+	struct udevice *dev;
+	struct udevice *vusb33_supply;
+	struct udevice *vbus_supply;
+	struct clk_bulk clks;
+	struct phy_bulk phys;
+	int num_u2ports;
+	int num_u3ports;
+};
+
+static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
+{
+	u32 value;
+	u32 check_val;
+	int ret;
+	int i;
+
+	/* power on host ip */
+	clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+	/* power on and enable all u3 ports */
+	for (i = 0; i < mtk->num_u3ports; i++) {
+		clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
+				CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
+				CTRL_U3_PORT_HOST_SEL);
+	}
+
+	/* power on and enable all u2 ports */
+	for (i = 0; i < mtk->num_u2ports; i++) {
+		clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
+				CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
+				CTRL_U2_PORT_HOST_SEL);
+	}
+
+	/*
+	 * wait for clocks to be stable, and clock domains reset to
+	 * be inactive after power on and enable ports
+	 */
+	check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
+			STS1_SYS125_RST | STS1_XHCI_RST;
+
+	if (mtk->num_u3ports)
+		check_val |= STS1_U3_MAC_RST;
+
+	ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
+				 (check_val == (value & check_val)), 20000);
+	if (ret)
+		dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value);
+
+	return ret;
+}
+
+static int xhci_mtk_host_disable(struct mtk_xhci *mtk)
+{
+	int i;
+
+	/* power down all u3 ports */
+	for (i = 0; i < mtk->num_u3ports; i++)
+		setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN);
+
+	/* power down all u2 ports */
+	for (i = 0; i < mtk->num_u2ports; i++)
+		setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN);
+
+	/* power down host ip */
+	setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+	return 0;
+}
+
+static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk)
+{
+	u32 value;
+
+	/* reset whole ip */
+	setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+	udelay(1);
+	clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+
+	value = readl(mtk->ippc + IPPC_IP_XHCI_CAP);
+	mtk->num_u3ports = CAP_U3_PORT_NUM(value);
+	mtk->num_u2ports = CAP_U2_PORT_NUM(value);
+	dev_info(mtk->dev, "u2p:%d, u3p:%d\n",
+		 mtk->num_u2ports, mtk->num_u3ports);
+
+	return xhci_mtk_host_enable(mtk);
+}
+
+static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk)
+{
+	struct udevice *dev = mtk->dev;
+	int ret = 0;
+
+	mtk->hcd = devfdt_remap_addr_name(dev, "mac");
+	if (!mtk->hcd) {
+		dev_err(dev, "failed to get xHCI base address\n");
+		return -ENXIO;
+	}
+
+	mtk->ippc = devfdt_remap_addr_name(dev, "ippc");
+	if (!mtk->ippc) {
+		dev_err(dev, "failed to get IPPC base address\n");
+		return -ENXIO;
+	}
+
+	dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc);
+
+	ret = clk_get_bulk(dev, &mtk->clks);
+	if (ret) {
+		dev_err(dev, "failed to get clocks %d!\n", ret);
+		return ret;
+	}
+
+	ret = device_get_supply_regulator(dev, "vusb33-supply",
+					  &mtk->vusb33_supply);
+	if (ret)
+		debug("can't get vusb33 regulator %d!\n", ret);
+
+	ret = device_get_supply_regulator(dev, "vbus-supply",
+					  &mtk->vbus_supply);
+	if (ret)
+		debug("can't get vbus regulator %d!\n", ret);
+
+	return 0;
+}
+
+static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk)
+{
+	int ret;
+
+	ret = regulator_set_enable(mtk->vusb33_supply, true);
+	if (ret < 0 && ret != -ENOSYS) {
+		dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret);
+		return ret;
+	}
+
+	ret = regulator_set_enable(mtk->vbus_supply, true);
+	if (ret < 0 && ret != -ENOSYS) {
+		dev_err(mtk->dev, "failed to enable vbus %d!\n", ret);
+		regulator_set_enable(mtk->vusb33_supply, false);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk)
+{
+	regulator_set_enable(mtk->vbus_supply, false);
+	regulator_set_enable(mtk->vusb33_supply, false);
+}
+
+static int xhci_mtk_phy_setup(struct mtk_xhci *mtk)
+{
+	struct udevice *dev = mtk->dev;
+	struct phy_bulk *phys = &mtk->phys;
+	int ret;
+
+	ret = generic_phy_get_bulk(dev, phys);
+	if (ret)
+		return ret;
+
+	ret = generic_phy_init_bulk(phys);
+	if (ret)
+		return ret;
+
+	ret = generic_phy_power_on_bulk(phys);
+	if (ret)
+		generic_phy_exit_bulk(phys);
+
+	return ret;
+}
+
+static void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk)
+{
+	generic_phy_power_off_bulk(&mtk->phys);
+	generic_phy_exit_bulk(&mtk->phys);
+}
+
+static int xhci_mtk_probe(struct udevice *dev)
+{
+	struct mtk_xhci *mtk = dev_get_priv(dev);
+	struct xhci_hcor *hcor;
+	int ret;
+
+	mtk->dev = dev;
+	ret = xhci_mtk_ofdata_get(mtk);
+	if (ret)
+		return ret;
+
+	ret = xhci_mtk_ldos_enable(mtk);
+	if (ret)
+		goto ldos_err;
+
+	ret = clk_enable_bulk(&mtk->clks);
+	if (ret)
+		goto clks_err;
+
+	ret = xhci_mtk_phy_setup(mtk);
+	if (ret)
+		goto phys_err;
+
+	ret = xhci_mtk_ssusb_init(mtk);
+	if (ret)
+		goto ssusb_init_err;
+
+	hcor = (struct xhci_hcor *)((uintptr_t)mtk->hcd +
+			HC_LENGTH(xhci_readl(&mtk->hcd->cr_capbase)));
+
+	return xhci_register(dev, mtk->hcd, hcor);
+
+ssusb_init_err:
+	xhci_mtk_phy_shutdown(mtk);
+phys_err:
+	clk_disable_bulk(&mtk->clks);
+clks_err:
+	xhci_mtk_ldos_disable(mtk);
+ldos_err:
+	return ret;
+}
+
+static int xhci_mtk_remove(struct udevice *dev)
+{
+	struct mtk_xhci *mtk = dev_get_priv(dev);
+
+	xhci_deregister(dev);
+	xhci_mtk_host_disable(mtk);
+	xhci_mtk_ldos_disable(mtk);
+	clk_disable_bulk(&mtk->clks);
+
+	return 0;
+}
+
+static const struct udevice_id xhci_mtk_ids[] = {
+	{ .compatible = "mediatek,mtk-xhci" },
+	{ }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+	.name = "xhci-mtk",
+	.id = UCLASS_USB,
+	.of_match = xhci_mtk_ids,
+	.probe = xhci_mtk_probe,
+	.remove = xhci_mtk_remove,
+	.ops = &xhci_usb_ops,
+	.bind = dm_scan_fdt_dev,
+	.priv_auto_alloc_size = sizeof(struct mtk_xhci),
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 40dee2e6d9..c370eb6394 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -610,6 +610,16 @@ static int xhci_set_configuration(struct usb_device *udev)
 		ep_ctx[ep_index]->tx_info =
 			cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
 			EP_AVG_TRB_LENGTH(avg_trb_len));
+
+		/*
+		 * The MediaTek xHCI defines some extra SW parameters which
+		 * are put into reserved DWs in Slot and Endpoint Contexts
+		 * for synchronous endpoints.
+		 */
+		if (IS_ENABLED(CONFIG_USB_XHCI_MTK)) {
+			ep_ctx[ep_index]->reserved[0] =
+				cpu_to_le32(EP_BPKTS(1) | EP_BBM(1));
+		}
 	}
 
 	return xhci_configure_endpoints(udev, false);
diff --git a/include/usb/xhci.h b/include/usb/xhci.h
index 6017504488..20e4a21066 100644
--- a/include/usb/xhci.h
+++ b/include/usb/xhci.h
@@ -670,6 +670,9 @@ struct xhci_ep_ctx {
 /* deq bitmasks */
 #define EP_CTX_CYCLE_MASK		(1 << 0)
 
+/* reserved[0] bitmasks, MediaTek xHCI used */
+#define EP_BPKTS(p)	(((p) & 0x7f) << 0)
+#define EP_BBM(p)	(((p) & 0x1) << 11)
 
 /**
  * struct xhci_input_control_context