diff options
| author | Christophe Kerello <christophe.kerello@st.com> | 2020-07-31 09:53:36 +0200 |
|---|---|---|
| committer | Patrice Chotard <patrice.chotard@st.com> | 2020-08-13 09:53:34 +0200 |
| commit | 4a470044e15031b59b8e66d12e92f2d13da009c9 (patch) | |
| tree | 5b76b1b65c09e2a0babc08e9fa60d458f03882f9 | |
| parent | a3899b373fc62431347330cbb833fcdb5b537116 (diff) | |
| download | u-boot-4a470044e15031b59b8e66d12e92f2d13da009c9.tar.gz | |
mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts
FMC2_TIMEOUT_5S will be used each time that we need to wait.
It was seen, during stress tests in an overloaded system,
that we could be close to 1 second, even if we never met this
value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
| -rw-r--r-- | drivers/mtd/nand/raw/stm32_fmc2_nand.c | 8 |
1 files changed, 5 insertions, 3 deletions
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index f43e3ec6b6..2e947a3400 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -131,6 +131,8 @@ #define FMC2_NSEC_PER_SEC 1000000000L +#define FMC2_TIMEOUT_5S 5000000 + enum stm32_fmc2_ecc { FMC2_ECC_HAM = 1, FMC2_ECC_BCH4 = 4, @@ -339,7 +341,7 @@ static int stm32_fmc2_ham_calculate(struct mtd_info *mtd, const u8 *data, int ret; ret = readl_poll_timeout(fmc2->io_base + FMC2_SR, sr, - sr & FMC2_SR_NWRF, 10000); + sr & FMC2_SR_NWRF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Ham timeout\n"); return ret; @@ -424,7 +426,7 @@ static int stm32_fmc2_bch_calculate(struct mtd_info *mtd, const u8 *data, /* Wait until the BCH code is ready */ ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr, - bchisr & FMC2_BCHISR_EPBRF, 10000); + bchisr & FMC2_BCHISR_EPBRF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Bch timeout\n"); return ret; @@ -472,7 +474,7 @@ static int stm32_fmc2_bch_correct(struct mtd_info *mtd, u8 *dat, /* Wait until the decoding error is ready */ ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr, - bchisr & FMC2_BCHISR_DERF, 10000); + bchisr & FMC2_BCHISR_DERF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Bch timeout\n"); return ret; |