diff options
| author | Phil Sutter <phil@nwl.cc> | 2021-01-03 23:06:44 +0100 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2021-01-27 07:29:43 +0100 |
| commit | 7d3c6c6e9ff431669d22d5f46bc8ad4b963a905a (patch) | |
| tree | 36a2c7c0c3e150ec32b039609985647999c1c2bc | |
| parent | 9d716339fbb4d3e074aa6dfca795bafd9832a34d (diff) | |
| download | u-boot-7d3c6c6e9ff431669d22d5f46bc8ad4b963a905a.tar.gz | |
arm: mvebu: ds414: Config header mini-review
A few minor changes:
* Get rid of leftover comments, other commits removed the defines they
referred to.
* CONFIG_SYS_NETA_INTERFACE_TYPE is not used anymore since commit
e3b9c98a23ca9 ("net: mvneta: Convert to driver model").
* Drop CONFIG_USB_MAX_CONTROLLER_COUNT: it is per-HCI type, so XHCI and
EHCI could still both work be used.
* Unconditionally define CONFIG_EHCI_IS_TDI: it has no effect on XHCI so
that conditional doesn't make any sense.
* Define a larger PHY_ANEG_TIMEOUT: In my test bed, the NIC is directly
connected to some RTL8111 and the default 8s timeout was often too
short.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
| -rw-r--r-- | include/configs/ds414.h | 21 |
1 files changed, 3 insertions, 18 deletions
diff --git a/include/configs/ds414.h b/include/configs/ds414.h index a92e788a38..8aa2d47bec 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -24,31 +24,13 @@ #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 -/* Environment in SPI NOR flash */ - -#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII - /* PCIe support */ #ifndef CONFIG_SPL_BUILD #define CONFIG_PCI_SCAN_SHOW #endif /* USB/EHCI/XHCI configuration */ - -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* FIXME: broken XHCI support - * Below defines should enable support for the two rear USB3 ports. Sadly, this - * does not work because: - * - xhci-pci seems to not support DM_USB, so with that enabled it is not - * found. - * - USB init fails, controller does not respond in time */ - -#if !defined(CONFIG_USB_XHCI_HCD) #define CONFIG_EHCI_IS_TDI -#endif - -/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */ /* * mv-common.h should be defined after CMD configs since it used them @@ -95,4 +77,7 @@ #define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm" #define CONFIG_LOADADDR 0x80000 +/* increase autoneg timeout, my NIC sucks */ +#define PHY_ANEG_TIMEOUT 16000 + #endif /* _CONFIG_SYNOLOGY_DS414_H */ |