summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorChuanhua Han <chuanhua.han@nxp.com>2019-07-26 20:25:35 +0800
committerPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>2019-08-22 09:07:36 +0530
commitc8b2e364b662c76b04da2eb4a3516bf333f55279 (patch)
tree58f6d57d1438d5affb327d4b978a154486eabc10
parent96d3fb41469272ff6e36308986618bb1c5c1c667 (diff)
downloadu-boot-c8b2e364b662c76b04da2eb4a3516bf333f55279.tar.gz
armv8: ls1088aqds: Add support of I2C driver model.
Udate ls1088aqds board init code to support DM_I2C. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-rw-r--r--board/freescale/ls1088a/eth_ls1088aqds.c149
-rw-r--r--include/configs/ls1088aqds.h4
2 files changed, 104 insertions, 49 deletions
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
index d4ab9791e9..237088a537 100644
--- a/board/freescale/ls1088a/eth_ls1088aqds.c
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -81,11 +81,16 @@ struct ls1088a_qds_mdio {
struct mii_dev *realbus;
};
+struct reg_pair {
+ uint addr;
+ u8 *val;
+};
+
static void sgmii_configure_repeater(int dpmac)
{
struct mii_dev *bus;
uint8_t a = 0xf;
- int i, j, ret;
+ int i, j, k, ret;
unsigned short value;
const char *dev = "LS1088A_QDS_MDIO2";
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -97,8 +102,28 @@ static void sgmii_configure_repeater(int dpmac)
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+ u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+ struct reg_pair reg_pair[10] = {
+ {6, &reg_val[0]}, {4, &reg_val[1]},
+ {8, &reg_val[2]}, {0xf, NULL},
+ {0x11, NULL}, {0x16, NULL},
+ {0x18, NULL}, {0x23, &reg_val[3]},
+ {0x2d, &reg_val[4]}, {4, &reg_val[5]},
+ };
+#ifdef CONFIG_DM_I2C
+ struct udevice *udev;
+#endif
+
/* Set I2c to Slot 1 */
- i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+ if (ret)
+ goto error;
switch (dpmac) {
case 1:
@@ -144,31 +169,34 @@ static void sgmii_configure_repeater(int dpmac)
return;
}
+#ifdef CONFIG_DM_I2C
+ i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
+#endif
+
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
- a = 0x18;
- i2c_write(i2c_phy_addr, 6, 1, &a, 1);
- a = 0x38;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
- a = 0x4;
- i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
- i2c_write(i2c_phy_addr, 0xf, 1,
- &ch_a_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x11, 1,
- &ch_a_ctl2[j], 1);
-
- i2c_write(i2c_phy_addr, 0x16, 1,
- &ch_b_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x18, 1,
- &ch_b_ctl2[j], 1);
-
- a = 0x14;
- i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
- a = 0xb5;
- i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
- a = 0x20;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+ reg_pair[3].val = &ch_a_eq[i];
+ reg_pair[4].val = &ch_a_ctl2[j];
+ reg_pair[5].val = &ch_b_eq[i];
+ reg_pair[6].val = &ch_b_ctl2[j];
+ for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(i2c_phy_addr,
+ reg_pair[k].addr,
+ 1, reg_pair[k].val, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0,
+ i2c_phy_addr,
+ 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev,
+ reg_pair[k].addr,
+ reg_pair[k].val, 1);
+#endif
+ if (ret)
+ goto error;
+ }
+
mdelay(100);
ret = miiphy_read(dev, phy_addr, 0x11, &value);
if (ret > 0)
@@ -203,7 +231,7 @@ error:
static void qsgmii_configure_repeater(int dpmac)
{
uint8_t a = 0xf;
- int i, j;
+ int i, j, k;
int i2c_phy_addr = 0;
int phy_addr = 0;
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -213,12 +241,32 @@ static void qsgmii_configure_repeater(int dpmac)
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+ u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+ struct reg_pair reg_pair[10] = {
+ {6, &reg_val[0]}, {4, &reg_val[1]},
+ {8, &reg_val[2]}, {0xf, NULL},
+ {0x11, NULL}, {0x16, NULL},
+ {0x18, NULL}, {0x23, &reg_val[3]},
+ {0x2d, &reg_val[4]}, {4, &reg_val[5]},
+ };
+
const char *dev = mdio_names[EMI1_SLOT1];
int ret = 0;
unsigned short value;
+#ifdef CONFIG_DM_I2C
+ struct udevice *udev;
+#endif
/* Set I2c to Slot 1 */
- i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+ if (ret)
+ goto error;
switch (dpmac) {
case 7:
@@ -252,28 +300,35 @@ static void qsgmii_configure_repeater(int dpmac)
return;
}
+#ifdef CONFIG_DM_I2C
+ i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
+#endif
+
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
- a = 0x18;
- i2c_write(i2c_phy_addr, 6, 1, &a, 1);
- a = 0x38;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
- a = 0x4;
- i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
- i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
-
- i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
-
- a = 0x14;
- i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
- a = 0xb5;
- i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
- a = 0x20;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
- mdelay(100);
+ reg_pair[3].val = &ch_a_eq[i];
+ reg_pair[4].val = &ch_a_ctl2[j];
+ reg_pair[5].val = &ch_b_eq[i];
+ reg_pair[6].val = &ch_b_ctl2[j];
+
+ for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(i2c_phy_addr,
+ reg_pair[k].addr,
+ 1, reg_pair[k].val, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0,
+ i2c_addr[dpmac],
+ 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev,
+ reg_pair[k].addr,
+ reg_pair[k].val, 1);
+#endif
+ if (ret)
+ goto error;
+ }
+
ret = miiphy_read(dev, phy_addr, 0x11, &value);
if (ret > 0)
goto error;
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 4387862582..8b62bbe684 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -46,7 +46,9 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_DDR_CLK_FREQ 100000000
#else
#define CONFIG_QIXIS_I2C_ACCESS
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C_EARLY_INIT
+#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
#endif
@@ -357,9 +359,7 @@ unsigned long get_board_ddr_clk(void);
* RTC configuration
*/
#define RTC
-#define CONFIG_RTC_PCF8563 1
#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/
-#define CONFIG_CMD_DATE
/* EEPROM */
#define CONFIG_ID_EEPROM