Merge branch '2021-08-30-fix-hash-algos-in-spl'WIP/30Aug2021

Quoting Alex:

Simon and I recently worked on killing a bunch extra definitions.
One of the side-effects is that certain hash algorithms won't work in
SPL when used in the context of FIT verification.

For example, in FIT verification, CONFIG_IS_ENABLED(SHA256) is used
(good), but there is no corresponding CONFIG_SPL_SHA256 (bad). This
will always be false for SPL, hence certain "hash" algos are broken.

This series resolves the selection by replacing the broken selection
with hash_lookup_algo(), which does not have the aforementioned problem.
This at the very least allows 'algo = "sha256"' FIT nodes to work in
SPL.

This series does not attempt to add individual SHA/CRC/MD5 configs for
SPL. Hash algo selection for SPL has been problematic even before.  This
series is meant as an emergency fix, so it does not attempt to tackle
general refactoring issues.

19 files changed, 36 insertions, 167 deletions

diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index f4791c1ebe..bddfd44427 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -11,7 +11,7 @@ config SOCFPGA_SECURE_VAB_AUTH
 	depends on TARGET_SOCFPGA_AGILEX || TARGET_SOCFPGA_N5X
 	select FIT_IMAGE_POST_PROCESS
 	select SHA384
-	select SHA512_ALGO
+	select SHA512
 	select SPL_FIT_IMAGE_POST_PROCESS
 	help
 	 All images loaded from FIT will be authenticated by Secure Device
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index ab9c14ae88..35a6115e5e 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -4,6 +4,7 @@ config CHAIN_OF_TRUST
 	imply CMD_HASH if ARM
 	select FSL_CAAM
 	select SPL_BOARD_INIT if (ARM && SPL)
+	select SPL_HASH if (ARM && SPL)
 	select SHA_HW_ACCEL
 	select SHA_PROG_HW_ACCEL
 	select ENV_IS_NOWHERE
diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index 0d4c38402c..c2d6c89372 100644
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -13,6 +13,7 @@ config FIT
 	bool "Support Flattened Image Tree"
 	select MD5
 	select SHA1
+	select HASH
 	help
 	  This option allows you to boot the new uImage structure,
 	  Flattened Image Tree.  FIT is formally a FDT, which can include
@@ -35,34 +36,6 @@ config FIT_EXTERNAL_OFFSET
 	  could be put in the hole between data payload and fit image
 	  header, such as CSF data on i.MX platform.
 
-config FIT_SHA256
-	bool "Support SHA256 checksum of FIT image contents"
-	default y
-	select SHA256
-	help
-	  Enable this to support SHA256 checksum of FIT image contents. A
-	  SHA256 checksum is a 256-bit (32-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
-config FIT_SHA384
-	bool "Support SHA384 checksum of FIT image contents"
-	default n
-	select SHA384
-	help
-	  Enable this to support SHA384 checksum of FIT image contents. A
-	  SHA384 checksum is a 384-bit (48-byte) hash value used to check that
-	  the image contents have not been corrupted. Use this for the highest
-	  security.
-
-config FIT_SHA512
-	bool "Support SHA512 checksum of FIT image contents"
-	default n
-	select SHA512
-	help
-	  Enable this to support SHA512 checksum of FIT image contents. A
-	  SHA512 checksum is a 512-bit (64-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
 config FIT_FULL_CHECK
 	bool "Do a full check of the FIT before using it"
 	default y
@@ -161,6 +134,7 @@ if SPL
 config SPL_FIT
 	bool "Support Flattened Image Tree within SPL"
 	depends on SPL
+	select SPL_HASH
 	select SPL_OF_LIBFDT
 
 config SPL_FIT_PRINT
@@ -185,7 +159,7 @@ config SPL_FIT_SIGNATURE
 	select FIT_SIGNATURE
 	select SPL_FIT
 	select SPL_CRYPTO
-	select SPL_HASH_SUPPORT
+	select SPL_HASH
 	imply SPL_RSA
 	imply SPL_RSA_VERIFY
 	select SPL_IMAGE_SIGN_INFO
diff --git a/common/Makefile b/common/Makefile
index 9063ed9391..ae0430c35f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -8,7 +8,6 @@ ifndef CONFIG_SPL_BUILD
 obj-y += init/
 obj-y += main.o
 obj-y += exports.o
-obj-$(CONFIG_HASH) += hash.o
 obj-$(CONFIG_HUSH_PARSER) += cli_hush.o
 obj-$(CONFIG_AUTOBOOT) += autoboot.o
 
@@ -66,8 +65,6 @@ ifdef CONFIG_SPL_BUILD
 ifdef CONFIG_SPL_DFU
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 endif
-obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
-obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
@@ -105,6 +102,7 @@ endif
 endif
 
 obj-y += image.o
+obj-$(CONFIG_$(SPL_TPL_)HASH) += hash.o
 obj-$(CONFIG_ANDROID_AB) += android_ab.o
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o image-android-dt.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
diff --git a/common/image-fit.c b/common/image-fit.c
index aff4670be3..92d9141bcd 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -1193,6 +1193,12 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
 	return 0;
 }
 
+static void crc32_uimage_fixup(void *value)
+{
+	/* TODO: In C, this type punning is undefined behavior: */
+	*((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
+}
+
 /**
  * calculate_hash - calculate and return hash for provided input data
  * @data: pointer to the input data
@@ -1211,37 +1217,24 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
  *     0, on success
  *    -1, when algo is unsupported
  */
-int calculate_hash(const void *data, int data_len, const char *algo,
+int calculate_hash(const void *data, int data_len, const char *name,
 			uint8_t *value, int *value_len)
 {
-	if (IMAGE_ENABLE_CRC32 && strcmp(algo, "crc32") == 0) {
-		*((uint32_t *)value) = crc32_wd(0, data, data_len,
-							CHUNKSZ_CRC32);
-		*((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
-		*value_len = 4;
-	} else if (CONFIG_IS_ENABLED(SHA1) && strcmp(algo, "sha1") == 0) {
-		sha1_csum_wd((unsigned char *)data, data_len,
-			     (unsigned char *)value, CHUNKSZ_SHA1);
-		*value_len = 20;
-	} else if (CONFIG_IS_ENABLED(SHA256) && strcmp(algo, "sha256") == 0) {
-		sha256_csum_wd((unsigned char *)data, data_len,
-			       (unsigned char *)value, CHUNKSZ_SHA256);
-		*value_len = SHA256_SUM_LEN;
-	} else if (CONFIG_IS_ENABLED(SHA384) && strcmp(algo, "sha384") == 0) {
-		sha384_csum_wd((unsigned char *)data, data_len,
-			       (unsigned char *)value, CHUNKSZ_SHA384);
-		*value_len = SHA384_SUM_LEN;
-	} else if (CONFIG_IS_ENABLED(SHA512) && strcmp(algo, "sha512") == 0) {
-		sha512_csum_wd((unsigned char *)data, data_len,
-			       (unsigned char *)value, CHUNKSZ_SHA512);
-		*value_len = SHA512_SUM_LEN;
-	} else if (IMAGE_ENABLE_MD5 && strcmp(algo, "md5") == 0) {
-		md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5);
-		*value_len = 16;
-	} else {
+	struct hash_algo *algo;
+	int ret;
+
+	ret = hash_lookup_algo(name, &algo);
+	if (ret < 0) {
 		debug("Unsupported hash alogrithm\n");
 		return -1;
 	}
+
+	algo->hash_func_ws(data, data_len, value, algo->chunk_size);
+	*value_len = algo->digest_size;
+
+	if (!strcmp(name, "crc32"))
+		crc32_uimage_fixup(value);
+
 	return 0;
 }
 
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c155a3b5fc..29a46c4787 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -439,48 +439,6 @@ config SPL_MD5
 	  applications where images may be changed maliciously, you should
 	  consider SHA256 or SHA384.
 
-config SPL_FIT_SHA1
-	bool "Support SHA1"
-	depends on SPL_FIT
-	select SHA1
-	help
-	  Enable this to support SHA1 in FIT images within SPL. A SHA1
-	  checksum is a 160-bit (20-byte) hash value used to check that the
-	  image contents have not been corrupted or maliciously altered.
-	  While SHA1 is fairly secure it is coming to the end of its life
-	  due to the expanding computing power available to brute-force
-	  attacks. For more security, consider SHA256 or SHA384.
-
-config SPL_FIT_SHA256
-	bool "Support SHA256"
-	depends on SPL_FIT
-	select SHA256
-	help
-	  Enable this to support SHA256 in FIT images within SPL. A SHA256
-	  checksum is a 256-bit (32-byte) hash value used to check that the
-	  image contents have not been corrupted.
-
-config SPL_FIT_SHA384
-	bool "Support SHA384"
-	depends on SPL_FIT
-	select SHA384
-	select SHA512_ALGO
-	help
-	  Enable this to support SHA384 in FIT images within SPL. A SHA384
-	  checksum is a 384-bit (48-byte) hash value used to check that the
-	  image contents have not been corrupted. Use this for the highest
-	  security.
-
-config SPL_FIT_SHA512
-	bool "Support SHA512"
-	depends on SPL_FIT
-	select SHA512
-	select SHA512_ALGO
-	help
-	  Enable this to support SHA512 in FIT images within SPL. A SHA512
-	  checksum is a 512-bit (64-byte) hash value used to check that the
-	  image contents have not been corrupted.
-
 config SPL_FIT_IMAGE_TINY
 	bool "Remove functionality from SPL FIT loading to reduce size"
 	depends on SPL_FIT
@@ -519,27 +477,6 @@ config SPL_CRYPTO
 	  this option to build the drivers in drivers/crypto as part of an
 	  SPL build.
 
-config SPL_HASH_SUPPORT
-	bool "Support hashing drivers"
-	select SHA1
-	select SHA256
-	help
-	  Enable hashing drivers in SPL. These drivers can be used to
-	  accelerate secure boot processing in secure applications. Enable
-	  this option to build system-specific drivers for hash acceleration
-	  as part of an SPL build.
-
-config TPL_HASH_SUPPORT
-	bool "Support hashing drivers in TPL"
-	depends on TPL
-	select SHA1
-	select SHA256
-	help
-	  Enable hashing drivers in SPL. These drivers can be used to
-	  accelerate secure boot processing in secure applications. Enable
-	  this option to build system-specific drivers for hash acceleration
-	  as part of an SPL build.
-
 config SPL_DMA
 	bool "Support DMA drivers"
 	help
@@ -1235,7 +1172,7 @@ config SPL_USB_ETHER
 
 config SPL_DFU
 	bool "Support DFU (Device Firmware Upgrade)"
-	select SPL_HASH_SUPPORT
+	select SPL_HASH
 	select SPL_DFU_NO_RESET
 	depends on SPL_RAM_SUPPORT
 	help
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 78196e6485..f9d551c6a8 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -31,7 +31,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 3736445d47..2733ca8358 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index b879a0c361..392ef1cbd5 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index c46d0dbedd..3d5783aa26 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 96d44799fa..0d94027ccb 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -33,7 +33,6 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/mt8516_pumpkin_defconfig b/configs/mt8516_pumpkin_defconfig
index 0a6c1fccae..1478b01716 100644
--- a/configs/mt8516_pumpkin_defconfig
+++ b/configs/mt8516_pumpkin_defconfig
@@ -13,7 +13,7 @@ CONFIG_DEBUG_UART_CLOCK=26000000
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-# CONFIG_FIT_SHA256 is not set
+# CONFIG_SHA256 is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 262154cdff..42758ba758 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -258,7 +258,7 @@
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 # define CONFIG_SPL_ENV_SUPPORT
-# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_SPL_HASH
 # define CONFIG_ENV_MAX_ENTRIES	10
 #endif
 
diff --git a/include/image.h b/include/image.h
index e20f0b69d5..2d057d445c 100644
--- a/include/image.h
+++ b/include/image.h
@@ -31,9 +31,6 @@ struct fdt_region;
 #define IMAGE_ENABLE_OF_LIBFDT	1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 #define CONFIG_FIT_RSASSA_PSS 1
-#define CONFIG_FIT_SHA256
-#define CONFIG_FIT_SHA384
-#define CONFIG_FIT_SHA512
 #define CONFIG_SHA1
 #define CONFIG_SHA256
 #define CONFIG_SHA384
@@ -62,26 +59,6 @@ struct fdt_region;
 #include <hash.h>
 #include <linux/libfdt.h>
 #include <fdt_support.h>
-# ifdef CONFIG_SPL_BUILD
-#  ifdef CONFIG_SPL_CRC32
-#   define IMAGE_ENABLE_CRC32	1
-#  endif
-#  ifdef CONFIG_SPL_MD5
-#   define IMAGE_ENABLE_MD5	1
-#  endif
-# else
-#  define IMAGE_ENABLE_CRC32	1
-#  define IMAGE_ENABLE_MD5	1
-# endif
-
-#ifndef IMAGE_ENABLE_CRC32
-#define IMAGE_ENABLE_CRC32	0
-#endif
-
-#ifndef IMAGE_ENABLE_MD5
-#define IMAGE_ENABLE_MD5	0
-#endif
-
 #endif /* IMAGE_ENABLE_FIT */
 
 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
diff --git a/lib/Kconfig b/lib/Kconfig
index c535147aea..48565a4169 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -375,14 +375,9 @@ config SHA256
 	  The SHA256 algorithm produces a 256-bit (32-byte) hash value
 	  (digest).
 
-config SHA512_ALGO
-	bool "Enable SHA512 algorithm"
-	help
-	  This option enables support of internal SHA512 algorithm.
 
 config SHA512
 	bool "Enable SHA512 support"
-	depends on SHA512_ALGO
 	help
 	  This option enables support of hashing using SHA512 algorithm.
 	  The hash is calculated in software.
@@ -391,10 +386,11 @@ config SHA512
 
 config SHA384
 	bool "Enable SHA384 support"
-	depends on SHA512_ALGO
+	select SHA512
 	help
 	  This option enables support of hashing using SHA384 algorithm.
-	  The hash is calculated in software.
+	  The hash is calculated in software. This is also selects SHA512,
+	  because these implementations share the bulk of the code..
 	  The SHA384 algorithm produces a 384-bit (48-byte) hash value
 	  (digest).
 
@@ -409,7 +405,7 @@ if SHA_HW_ACCEL
 
 config SHA512_HW_ACCEL
 	bool "Enable hardware acceleration for SHA512"
-	depends on SHA512_ALGO
+	depends on SHA512
 	help
 	  This option enables hardware acceleration for the SHA384 and SHA512
 	  hashing algorithms. This affects the 'hash' command and also the
diff --git a/lib/Makefile b/lib/Makefile
index 8ba745faa0..93be86c34a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -65,7 +65,7 @@ obj-$(CONFIG_$(SPL_)RSA) += rsa/
 obj-$(CONFIG_HASH) += hash-checksum.o
 obj-$(CONFIG_SHA1) += sha1.o
 obj-$(CONFIG_SHA256) += sha256.o
-obj-$(CONFIG_SHA512_ALGO) += sha512.o
+obj-$(CONFIG_SHA512) += sha512.o
 obj-$(CONFIG_CRYPT_PW) += crypt/
 
 obj-$(CONFIG_$(SPL_)ZLIB) += zlib/
@@ -87,7 +87,7 @@ endif
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
-obj-$(CONFIG_$(SPL_TPL_)HASH_SUPPORT) += crc16.o
+obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16.o
 obj-y += net_utils.o
 endif
 obj-$(CONFIG_ADDR_MAP) += addr_map.o
diff --git a/lib/crypt/Kconfig b/lib/crypt/Kconfig
index 5495ae8d4c..6a50029642 100644
--- a/lib/crypt/Kconfig
+++ b/lib/crypt/Kconfig
@@ -20,7 +20,7 @@ config CRYPT_PW_SHA256
 config CRYPT_PW_SHA512
 	bool "Provide sha512crypt"
 	select SHA512
-	select SHA512_ALGO
+	select SHA512
 	help
 	  Enables support for the sha512crypt password-hashing algorithm.
 	  The prefix is "$6$".
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index dacc3b5881..08463251cd 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -323,7 +323,7 @@ config EFI_TCG2_PROTOCOL
 	depends on TPM_V2
 	select SHA1
 	select SHA256
-	select SHA512_ALGO
+	select SHA512
 	select SHA384
 	select SHA512
 	select HASH
diff --git a/lib/sha512.c b/lib/sha512.c
index 35f31e3dc5..a421f249ba 100644
--- a/lib/sha512.c
+++ b/lib/sha512.c
@@ -320,7 +320,6 @@ void sha384_csum_wd(const unsigned char *input, unsigned int ilen,
 
 #endif
 
-#if defined(CONFIG_SHA512)
 void sha512_starts(sha512_context * ctx)
 {
 	ctx->state[0] = SHA512_H0;
@@ -381,4 +380,3 @@ void sha512_csum_wd(const unsigned char *input, unsigned int ilen,
 
 	sha512_finish(&ctx, output);
 }
-#endif