diff options
| author | Rasmus Villemoes <rasmus.villemoes@prevas.dk> | 2019-12-19 09:46:08 +0000 |
|---|---|---|
| committer | Mario Six <mario.six@gdsys.cc> | 2020-01-08 08:14:36 +0100 |
| commit | fddf876a8f56ff53d1354387ebf7fd3997189349 (patch) | |
| tree | 09ac3204e9309a3cbf23135d4d1410c3c7eb066c | |
| parent | 42a13a0b9faf88da332675c997f06a063fc77133 (diff) | |
| download | u-boot-fddf876a8f56ff53d1354387ebf7fd3997189349.tar.gz | |
mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalid
The current mpc83xx_clk driver is broken for any board for which
mpc83xx_has_pci() is true, i.e. anything not MPC8308:
When is_clk_valid() reports that MPC83XX_CLK_PCI is valid,
init_all_clks() proceeds to call init_single_clk(), but that doesn't
know about either MPC83XX_CLK_PCI or has any handling of the
TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence
init_single_clk() ends up returning -EINVAL, and the whole board hangs
in serial_init().
The quickest fix is to simply pretend that clock is invalid for
all, since nobody can have been relying on it. Adding proper support
seems to be a bit more involved than just handling TYPE_SCCR_ONOFF:
- The power-on-reset value of SCCR[PCICM] is 0, so
mpc83xx_clk_enable() would probably need to be tought to enable the
clock.
- The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2
depending on the CFG_CLKIN_DIV configuration input, but that can't
be read from software, so to properly fill out
->speed[MPC83XX_CLK_PCI] I think one would need guidance from
Kconfig or dtb.
Partially fixes: 07d538d281 clk: Add MPC83xx clock driver
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
| -rw-r--r-- | drivers/clk/mpc83xx_clk.c | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/clk/mpc83xx_clk.c b/drivers/clk/mpc83xx_clk.c index cbccda5594..69c6207e49 100644 --- a/drivers/clk/mpc83xx_clk.c +++ b/drivers/clk/mpc83xx_clk.c @@ -66,7 +66,10 @@ static inline bool is_clk_valid(struct udevice *clk, int id) case MPC83XX_CLK_DMAC: return (type == SOC_MPC8308) || (type == SOC_MPC8309); case MPC83XX_CLK_PCI: - return mpc83xx_has_pci(type); + /* + * FIXME: implement proper support for this. + */ + return 0 && mpc83xx_has_pci(type); case MPC83XX_CLK_CSB: return true; case MPC83XX_CLK_I2C2: |