Kconfig: Move boot menu into common/

Most of the boot options are in common/Kconfig but that file is already
extremely large. Create a new Kconfig.boot to hold the boot options.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 341 deletions

diff --git a/Kconfig b/Kconfig
index 34f17eb943..c385535a5c 100644
--- a/Kconfig
+++ b/Kconfig
@@ -432,347 +432,6 @@ config EXAMPLES
 
 endmenu		# General setup
 
-menu "Boot options"
-
-menu "Boot images"
-
-config ANDROID_BOOT_IMAGE
-	bool "Enable support for Android Boot Images"
-	default y if FASTBOOT
-	help
-	  This enables support for booting images which use the Android
-	  image format header.
-
-config FIT
-	bool "Support Flattened Image Tree"
-	select MD5
-	select SHA1
-	help
-	  This option allows you to boot the new uImage structure,
-	  Flattened Image Tree.  FIT is formally a FDT, which can include
-	  images of various types (kernel, FDT blob, ramdisk, etc.)
-	  in a single blob.  To boot this new uImage structure,
-	  pass the address of the blob to the "bootm" command.
-	  FIT is very flexible, supporting compression, multiple images,
-	  multiple configurations, verification through hashing and also
-	  verified boot (secure boot using RSA).
-
-if FIT
-
-config FIT_EXTERNAL_OFFSET
-	hex "FIT external data offset"
-	default 0x0
-	help
-	  This specifies a data offset in fit image.
-	  The offset is from data payload offset to the beginning of
-	  fit image header. When specifies a offset, specific data
-	  could be put in the hole between data payload and fit image
-	  header, such as CSF data on i.MX platform.
-
-config FIT_ENABLE_SHA256_SUPPORT
-	bool "Support SHA256 checksum of FIT image contents"
-	default y
-	select SHA256
-	help
-	  Enable this to support SHA256 checksum of FIT image contents. A
-	  SHA256 checksum is a 256-bit (32-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
-config FIT_ENABLE_SHA384_SUPPORT
-	bool "Support SHA384 checksum of FIT image contents"
-	default n
-	select SHA384
-	help
-	  Enable this to support SHA384 checksum of FIT image contents. A
-	  SHA384 checksum is a 384-bit (48-byte) hash value used to check that
-	  the image contents have not been corrupted. Use this for the highest
-	  security.
-
-config FIT_ENABLE_SHA512_SUPPORT
-	bool "Support SHA512 checksum of FIT image contents"
-	default n
-	select SHA512
-	help
-	  Enable this to support SHA512 checksum of FIT image contents. A
-	  SHA512 checksum is a 512-bit (64-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
-config FIT_SIGNATURE
-	bool "Enable signature verification of FIT uImages"
-	depends on DM
-	select HASH
-	select RSA
-	select RSA_VERIFY
-	select IMAGE_SIGN_INFO
-	help
-	  This option enables signature verification of FIT uImages,
-	  using a hash signed and verified using RSA. If
-	  CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
-	  hashing is available using hardware, then the RSA library will use
-	  it. See doc/uImage.FIT/signature.txt for more details.
-
-	  WARNING: When relying on signed FIT images with a required signature
-	  check the legacy image format is disabled by default, so that
-	  unsigned images cannot be loaded. If a board needs the legacy image
-	  format support in this case, enable it using
-	  CONFIG_LEGACY_IMAGE_FORMAT.
-
-config FIT_SIGNATURE_MAX_SIZE
-	hex "Max size of signed FIT structures"
-	depends on FIT_SIGNATURE
-	default 0x10000000
-	help
-	  This option sets a max size in bytes for verified FIT uImages.
-	  A sane value of 256MB protects corrupted DTB structures from overlapping
-	  device memory. Assure this size does not extend past expected storage
-	  space.
-
-config FIT_ENABLE_RSASSA_PSS_SUPPORT
-	bool "Support rsassa-pss signature scheme of FIT image contents"
-	depends on FIT_SIGNATURE
-	default n
-	help
-	  Enable this to support the pss padding algorithm as described
-	  in the rfc8017 (https://tools.ietf.org/html/rfc8017).
-
-config FIT_CIPHER
-	bool "Enable ciphering data in a FIT uImages"
-	depends on DM
-	select AES
-	help
-	  Enable the feature of data ciphering/unciphering in the tool mkimage
-	  and in the u-boot support of the FIT image.
-
-config FIT_VERBOSE
-	bool "Show verbose messages when FIT images fail"
-	help
-	  Generally a system will have valid FIT images so debug messages
-	  are a waste of code space. If you are debugging your images then
-	  you can enable this option to get more verbose information about
-	  failures.
-
-config FIT_BEST_MATCH
-	bool "Select the best match for the kernel device tree"
-	help
-	  When no configuration is explicitly selected, default to the
-	  one whose fdt's compatibility field best matches that of
-	  U-Boot itself. A match is considered "best" if it matches the
-	  most specific compatibility entry of U-Boot's fdt's root node.
-	  The order of entries in the configuration's fdt is ignored.
-
-config FIT_IMAGE_POST_PROCESS
-	bool "Enable post-processing of FIT artifacts after loading by U-Boot"
-	depends on TI_SECURE_DEVICE
-	help
-	  Allows doing any sort of manipulation to blobs after they got extracted
-	  from FIT images like stripping off headers or modifying the size of the
-	  blob, verification, authentication, decryption etc. in a platform or
-	  board specific way. In order to use this feature a platform or board-
-	  specific implementation of board_fit_image_post_process() must be
-	  provided. Also, anything done during this post-processing step would
-	  need to be comprehended in how the images were prepared before being
-	  injected into the FIT creation (i.e. the blobs would have been pre-
-	  processed before being added to the FIT image).
-
-if SPL
-
-config SPL_FIT
-	bool "Support Flattened Image Tree within SPL"
-	depends on SPL
-	select SPL_OF_LIBFDT
-
-config SPL_FIT_PRINT
-	bool "Support FIT printing within SPL"
-	depends on SPL_FIT
-	help
-	  Support printing the content of the fitImage in a verbose manner in SPL.
-
-config SPL_FIT_SIGNATURE
-	bool "Enable signature verification of FIT firmware within SPL"
-	depends on SPL_DM
-	select SPL_FIT
-	select SPL_CRYPTO_SUPPORT
-	select SPL_HASH_SUPPORT
-	select SPL_RSA
-	select SPL_RSA_VERIFY
-	select SPL_IMAGE_SIGN_INFO
-
-config SPL_LOAD_FIT
-	bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
-	select SPL_FIT
-	help
-	  Normally with the SPL framework a legacy image is generated as part
-	  of the build. This contains U-Boot along with information as to
-	  where it should be loaded. This option instead enables generation
-	  of a FIT (Flat Image Tree) which provides more flexibility. In
-	  particular it can handle selecting from multiple device tree
-	  and passing the correct one to U-Boot.
-
-config SPL_LOAD_FIT_ADDRESS
-	hex "load address of fit image"
-	depends on SPL_LOAD_FIT
-	default 0x0
-	help
-	  Specify the load address of the fit image that will be loaded
-	  by SPL.
-
-config SPL_LOAD_FIT_APPLY_OVERLAY
-	bool "Enable SPL applying DT overlays from FIT"
-	depends on SPL_LOAD_FIT
-	select OF_LIBFDT_OVERLAY
-	help
-	  The device tree is loaded from the FIT image. Allow the SPL is to
-	  also load device-tree overlays from the FIT image an apply them
-	  over the device tree.
-
-config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
-	depends on SPL_LOAD_FIT_APPLY_OVERLAY
-	default 0x10000
-	hex "size of temporary buffer used to load the overlays"
-	help
-	  The size of the area where the overlays will be loaded and
-	  uncompress. Must be at least as large as biggest overlay
-	  (uncompressed)
-
-config SPL_LOAD_FIT_FULL
-	bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
-	select SPL_FIT
-	help
-	  Normally with the SPL framework a legacy image is generated as part
-	  of the build. This contains U-Boot along with information as to
-	  where it should be loaded. This option instead enables generation
-	  of a FIT (Flat Image Tree) which provides more flexibility. In
-	  particular it can handle selecting from multiple device tree
-	  and passing the correct one to U-Boot.
-
-config SPL_FIT_IMAGE_POST_PROCESS
-	bool "Enable post-processing of FIT artifacts after loading by the SPL"
-	depends on SPL_LOAD_FIT
-	help
-	  Allows doing any sort of manipulation to blobs after they got extracted
-	  from the U-Boot FIT image like stripping off headers or modifying the
-	  size of the blob, verification, authentication, decryption etc. in a
-	  platform or board specific way. In order to use this feature a platform
-	  or board-specific implementation of board_fit_image_post_process() must
-	  be provided. Also, anything done during this post-processing step would
-	  need to be comprehended in how the images were prepared before being
-	  injected into the FIT creation (i.e. the blobs would have been pre-
-	  processed before being added to the FIT image).
-
-config SPL_FIT_SOURCE
-	string ".its source file for U-Boot FIT image"
-	depends on SPL_FIT
-	help
-	  Specifies a (platform specific) FIT source file to generate the
-	  U-Boot FIT image. This could specify further image to load and/or
-	  execute.
-
-config USE_SPL_FIT_GENERATOR
-	bool "Use a script to generate the .its script"
-	default y if SPL_FIT && !ARCH_SUNXI
-
-config SPL_FIT_GENERATOR
-	string ".its file generator script for U-Boot FIT image"
-	depends on USE_SPL_FIT_GENERATOR
-	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
-	default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
-	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
-	help
-	  Specifies a (platform specific) script file to generate the FIT
-	  source file used to build the U-Boot FIT image file. This gets
-	  passed a list of supported device tree file stub names to
-	  include in the generated image.
-
-endif # SPL
-
-endif # FIT
-
-config LEGACY_IMAGE_FORMAT
-	bool "Enable support for the legacy image format"
-	default y if !FIT_SIGNATURE
-	help
-	  This option enables the legacy image format. It is enabled by
-	  default for backward compatibility, unless FIT_SIGNATURE is
-	  set where it is disabled so that unsigned images cannot be
-	  loaded. If a board needs the legacy image format support in this
-	  case, enable it here.
-
-config OF_BOARD_SETUP
-	bool "Set up board-specific details in device tree before boot"
-	depends on OF_LIBFDT
-	help
-	  This causes U-Boot to call ft_board_setup() before booting into
-	  the Operating System. This function can set up various
-	  board-specific information in the device tree for use by the OS.
-	  The device tree is then passed to the OS.
-
-config OF_SYSTEM_SETUP
-	bool "Set up system-specific details in device tree before boot"
-	depends on OF_LIBFDT
-	help
-	  This causes U-Boot to call ft_system_setup() before booting into
-	  the Operating System. This function can set up various
-	  system-specific information in the device tree for use by the OS.
-	  The device tree is then passed to the OS.
-
-config OF_STDOUT_VIA_ALIAS
-	bool "Update the device-tree stdout alias from U-Boot"
-	depends on OF_LIBFDT
-	help
-	  This uses U-Boot's serial alias from the aliases node to update
-	  the device tree passed to the OS. The "linux,stdout-path" property
-	  in the chosen node is set to point to the correct serial node.
-	  This option currently references CONFIG_CONS_INDEX, which is
-	  incorrect when used with device tree as this option does not
-	  exist / should not be used.
-
-config SYS_EXTRA_OPTIONS
-	string "Extra Options (DEPRECATED)"
-	help
-	  The old configuration infrastructure (= mkconfig + boards.cfg)
-	  provided the extra options field. If you have something like
-	  "HAS_BAR,BAZ=64", the optional options
-	    #define CONFIG_HAS
-	    #define CONFIG_BAZ	64
-	  will be defined in include/config.h.
-	  This option was prepared for the smooth migration from the old
-	  configuration to Kconfig. Since this option will be removed sometime,
-	  new boards should not use this option.
-
-config HAVE_SYS_TEXT_BASE
-	bool
-	depends on !NIOS2 && !XTENSA
-	depends on !EFI_APP
-	default y
-
-config SYS_TEXT_BASE
-	depends on HAVE_SYS_TEXT_BASE
-	default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
-	default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
-	default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
-	default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
-	hex "Text Base"
-	help
-	  The address in memory that U-Boot will be running from, initially.
-
-config SYS_CLK_FREQ
-	depends on ARC || ARCH_SUNXI || MPC83xx
-	int "CPU clock frequency"
-	help
-	  TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
-
-config ARCH_FIXUP_FDT_MEMORY
-	bool "Enable arch_fixup_memory_banks() call"
-	default y
-	help
-	  Enable FDT memory map syncup before OS boot. This feature can be
-	  used for booting OS with different memory setup where the part of
-	  the memory location should be used for different purpose.
-
-endmenu		# Boot images
-
-endmenu		# Booting
-
 source "api/Kconfig"
 
 source "common/Kconfig"