diff options
| author | Patrice Chotard <patrice.chotard@st.com> | 2019-02-19 16:49:05 +0100 |
|---|---|---|
| committer | Patrice Chotard <patrice.chotard@st.com> | 2019-04-23 15:31:06 +0200 |
| commit | fe63d3cfb77ef5986951c04a9fa8fe73fb32fdb6 (patch) | |
| tree | 8e233e1f54964cb35c661c063fd1cf05a38feefc /arch/arm/dts/stm32746g-eval.dts | |
| parent | 01aabf97d1f08694ed511785638685cbee21e597 (diff) | |
| download | u-boot-fe63d3cfb77ef5986951c04a9fa8fe73fb32fdb6.tar.gz | |
ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Synchronize stm32f7 device tree with kernel v4.20.
All pinctrl bindings are updated.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Diffstat (limited to 'arch/arm/dts/stm32746g-eval.dts')
| -rw-r--r-- | arch/arm/dts/stm32746g-eval.dts | 102 |
1 files changed, 74 insertions, 28 deletions
diff --git a/arch/arm/dts/stm32746g-eval.dts b/arch/arm/dts/stm32746g-eval.dts index 94df80f69d..8c081eaf20 100644 --- a/arch/arm/dts/stm32746g-eval.dts +++ b/arch/arm/dts/stm32746g-eval.dts @@ -1,9 +1,5 @@ /* - * Copyright 2018 - Christophe Priouzeau <christophe.priouzeau@st.com> - * - * Based on: - * stm32f746-disco.dts from U-boot 2018.01 - * Copyright 2016 - Lee Jones <lee.jones@linaro.org> + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -46,55 +42,105 @@ /dts-v1/; #include "stm32f746.dtsi" -#include <dt-bindings/memory/stm32-sdram.h> +#include "stm32f746-pinctrl.dtsi" +#include <dt-bindings/input/input.h> / { - model = "STMicroelectronics STM32F746G-EVAL board"; - compatible = "st,stm32f746g-eval", "st,stm32f746"; + model = "STMicroelectronics STM32746g-EVAL board"; + compatible = "st,stm32746g-eval", "st,stm32f746"; chosen { + bootargs = "root=/dev/ram"; stdout-path = "serial0:115200n8"; }; memory { - reg = <0xC0000000 0x2000000>; + reg = <0xc0000000 0x2000000>; }; aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiof 10 1>; + linux,default-trigger = "heartbeat"; + }; + red { + gpios = <&gpiob 7 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioc 13 0>; + }; + }; + + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &clk_hse { clock-frequency = <25000000>; }; -&pinctrl { - usart1_pins_a: usart1@0 { - pins1 { - pinmux = <STM32F746_PA9_FUNC_USART1_TX>; - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - pins2 { - pinmux = <STM32F746_PA10_FUNC_USART1_RX>; - bias-disable; - }; - }; +&crc { + status = "okay"; }; -&usart1 { - pinctrl-0 = <&usart1_pins_a>; +&i2c1 { + pinctrl-0 = <&i2c1_pins_b>; pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&rtc { status = "okay"; }; -&sdio { +&sdio1 { status = "okay"; + vmmc-supply = <&mmc_vcard>; + broken-cd; pinctrl-names = "default", "opendrain"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_pins_od>; + pinctrl-0 = <&sdio_pins_a>; + pinctrl-1 = <&sdio_pins_od_a>; bus-width = <4>; - max-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; }; |