arm: at91: Enable watchdog support

This patch enables and starts the watchdog on the AT91 platform if
configured. The WD timeout value is read in the AT91 WD device driver
from the DT, using the "timeout-sec" DT property. If not provided in
the DT, the default value of 2 seconds is used.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 64cbc3d1ed..1d3df2c09d 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -5,12 +5,17 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <wdt.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_wdt.h>
 
 #define EN_UPLL_TIMEOUT		500
 
+static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
+
 void at91_periph_clk_enable(int id)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -118,3 +123,46 @@ void at91_pllicpr_init(u32 icpr)
 
 	writel(icpr, &pmc->pllicpr);
 }
+
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset(void)
+{
+	static ulong next_reset;
+	ulong now;
+
+	if (!watchdog_dev)
+		return;
+
+	now = get_timer(0);
+
+	/* Do not reset the watchdog too often */
+	if (now > next_reset) {
+		next_reset = now + 1000;	/* reset every 1000ms */
+		wdt_reset(watchdog_dev);
+	}
+}
+
+int arch_early_init_r(void)
+{
+	struct at91_wdt_priv *priv;
+
+	/* Init watchdog */
+	if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
+		debug("Watchdog: Not found by seq!\n");
+		if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
+			puts("Watchdog: Not found!\n");
+			return 0;
+		}
+	}
+
+	priv = dev_get_priv(watchdog_dev);
+	if (!priv) {
+		printf("Watchdog: priv not available!\n");
+		return 0;
+	}
+
+	wdt_start(watchdog_dev, priv->timeout * 1000, 0);
+	printf("Watchdog: Started\n");
+
+	return 0;
+}