diff options
author | Heiko Schocher <hs@denx.de> | 2017-06-07 17:33:10 +0200 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-06-12 08:38:02 -0400 |
commit | 2eb48ff7a210ddd2a39bac23b3b9b39c60c32aef (patch) | |
tree | d948cc6059525960b72e912f533df2cb140cf5f0 /arch/powerpc/cpu/mpc8260/spi.c | |
parent | 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f (diff) | |
download | u-boot-2eb48ff7a210ddd2a39bac23b3b9b39c60c32aef.tar.gz |
powerpc, 8260: remove support for mpc8260
There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.
Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/spi.c')
-rw-r--r-- | arch/powerpc/cpu/mpc8260/spi.c | 408 |
1 files changed, 0 insertions, 408 deletions
diff --git a/arch/powerpc/cpu/mpc8260/spi.c b/arch/powerpc/cpu/mpc8260/spi.c deleted file mode 100644 index c7fb4e9a6c..0000000000 --- a/arch/powerpc/cpu/mpc8260/spi.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright (c) 2001 Navin Boppuri / Prashant Patel - * <nboppuri@trinetcommunication.com>, - * <pmpatel@trinetcommunication.com> - * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de> - * Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8260 CPM SPI interface. - * - * Parts of this code are probably not portable and/or specific to - * the board which I used for the tests. Please send fixes/complaints - * to wd@denx.de - * - */ - -#include <common.h> -#include <asm/cpm_8260.h> -#include <linux/ctype.h> -#include <malloc.h> -#include <post.h> -#include <net.h> - -#if defined(CONFIG_SPI) - -/* Warning: - * You cannot enable DEBUG for early system initalization, i. e. when - * this driver is used to read environment parameters like "baudrate" - * from EEPROM which are used to initialize the serial port which is - * needed to print the debug messages... - */ -#undef DEBUG - -#define SPI_EEPROM_WREN 0x06 -#define SPI_EEPROM_RDSR 0x05 -#define SPI_EEPROM_READ 0x03 -#define SPI_EEPROM_WRITE 0x02 - -/* --------------------------------------------------------------- - * Offset for initial SPI buffers in DPRAM: - * We need a 520 byte scratch DPRAM area to use at an early stage. - * It is used between the two initialization calls (spi_init_f() - * and spi_init_r()). - * The value 0x2000 makes it far enough from the start of the data - * area (as well as from the stack pointer). - * --------------------------------------------------------------- */ -#ifndef CONFIG_SYS_SPI_INIT_OFFSET -#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000 -#endif - -#define CPM_SPI_BASE 0x100 - -#ifdef DEBUG - -#define DPRINT(a) printf a; -/* ----------------------------------------------- - * Helper functions to peek into tx and rx buffers - * ----------------------------------------------- */ -static const char * const hex_digit = "0123456789ABCDEF"; - -static char quickhex (int i) -{ - return hex_digit[i]; -} - -static void memdump (void *pv, int num) -{ - int i; - unsigned char *pc = (unsigned char *) pv; - - for (i = 0; i < num; i++) - printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f)); - printf ("\t"); - for (i = 0; i < num; i++) - printf ("%c", isprint (pc[i]) ? pc[i] : '.'); - printf ("\n"); -} -#else /* !DEBUG */ - -#define DPRINT(a) - -#endif /* DEBUG */ - -/* ------------------- - * Function prototypes - * ------------------- */ -void spi_init (void); - -ssize_t spi_read (uchar *, int, uchar *, int); -ssize_t spi_write (uchar *, int, uchar *, int); -ssize_t spi_xfer (size_t); - -/* ------------------- - * Variables - * ------------------- */ - -#define MAX_BUFFER 0x104 - -/* ---------------------------------------------------------------------- - * Initially we place the RX and TX buffers at a fixed location in DPRAM! - * ---------------------------------------------------------------------- */ -static uchar *rxbuf = - (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase - [CONFIG_SYS_SPI_INIT_OFFSET]; -static uchar *txbuf = - (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase - [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER]; - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ -void spi_init_f (void) -{ - unsigned int dpaddr; - - volatile spi_t *spi; - volatile immap_t *immr; - volatile cpm8260_t *cp; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - cp = (cpm8260_t *) &immr->im_cpm; - - immr->im_dprambase16[PROFF_SPI_BASE / sizeof(u16)] = PROFF_SPI; - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - -/* 1 */ - /* ------------------------------------------------ - * Initialize Port D SPI pins - * (we are only in Master Mode !) - * ------------------------------------------------ */ - - /* -------------------------------------------- - * GPIO or per. Function - * PPARD[16] = 1 [0x00008000] (SPIMISO) - * PPARD[17] = 1 [0x00004000] (SPIMOSI) - * PPARD[18] = 1 [0x00002000] (SPICLK) - * PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM) - * -------------------------------------------- */ - immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */ - immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */ - - /* ---------------------------------------------- - * In/Out or per. Function 0/1 - * PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO - * PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI - * PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK - * PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM - * ---------------------------------------------- */ - immr->im_ioport.iop_pdird &= ~0x0000E000; - immr->im_ioport.iop_pdird |= 0x00080000; - - /* ---------------------------------------------- - * special option reg. - * PSORD[16] = 1 [0x00008000] -> SPIMISO - * PSORD[17] = 1 [0x00004000] -> SPIMOSI - * PSORD[18] = 1 [0x00002000] -> SPICLK - * ---------------------------------------------- */ - immr->im_ioport.iop_psord |= 0x0000E000; - - /* Initialize the parameter ram. - * We need to make sure many things are initialized to zero - */ - spi->spi_rstate = 0; - spi->spi_rdp = 0; - spi->spi_rbptr = 0; - spi->spi_rbc = 0; - spi->spi_rxtmp = 0; - spi->spi_tstate = 0; - spi->spi_tdp = 0; - spi->spi_tbptr = 0; - spi->spi_tbc = 0; - spi->spi_txtmp = 0; - - dpaddr = CPM_SPI_BASE; - -/* 3 */ - /* Set up the SPI parameters in the parameter ram */ - spi->spi_rbase = dpaddr; - spi->spi_tbase = dpaddr + sizeof (cbd_t); - - /***********IMPORTANT******************/ - - /* - * Setting transmit and receive buffer descriptor pointers - * initially to rbase and tbase. Only the microcode patches - * documentation talks about initializing this pointer. This - * is missing from the sample I2C driver. If you dont - * initialize these pointers, the kernel hangs. - */ - spi->spi_rbptr = spi->spi_rbase; - spi->spi_tbptr = spi->spi_tbase; - -/* 4 */ - /* Init SPI Tx + Rx Parameters */ - while (cp->cp_cpcr & CPM_CR_FLG) - ; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG) - ; - -/* 6 */ - /* Set to big endian. */ - spi->spi_tfcr = CPMFCR_EB; - spi->spi_rfcr = CPMFCR_EB; - -/* 7 */ - /* Set maximum receive size. */ - spi->spi_mrblr = MAX_BUFFER; - -/* 8 + 9 */ - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - tbdf->cbd_sc &= ~BD_SC_READY; - rbdf->cbd_sc &= ~BD_SC_EMPTY; - - /* Set the bd's rx and tx buffer address pointers */ - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - -/* 10 + 11 */ - immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */ - immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */ - - - return; -} - -/* ************************************************************************** - * - * Function: spi_init_r - * - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * - * return: --- - * - * *********************************************************************** */ -void spi_init_r (void) -{ - volatile spi_t *spi; - volatile immap_t *immr; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - /* Allocate memory for RX and TX buffers */ - rxbuf = (uchar *) malloc (MAX_BUFFER); - txbuf = (uchar *) malloc (MAX_BUFFER); - - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - - return; -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - *txbuf = SPI_EEPROM_WREN; /* write enable */ - spi_xfer(1); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */ - memcpy(alen + txbuf, buffer, len); - spi_xfer(alen + len); - /* ignore received data */ - for (i = 0; i < 1000; i++) { - *txbuf = SPI_EEPROM_RDSR; /* read status */ - txbuf[1] = 0; - spi_xfer(2); - if (!(rxbuf[1] & 1)) { - break; - } - udelay(1000); - } - if (i >= 1000) { - printf ("*** spi_write: Time out while writing!\n"); - } - - return len; -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len) -{ - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_READ; /* READ memory array */ - - /* - * There is a bug in 860T (?) that cuts the last byte of input - * if we're reading into DPRAM. The solution we choose here is - * to always read len+1 bytes (we have one extra byte at the - * end of the buffer). - */ - spi_xfer(alen + len + 1); - memcpy(buffer, alen + rxbuf, len); - - return len; -} - -/**************************************************************************** - * Function: spi_xfer - **************************************************************************** */ -ssize_t spi_xfer (size_t count) -{ - volatile immap_t *immr; - volatile spi_t *spi; - cbd_t *tbdf, *rbdf; - int tm; - - DPRINT (("*** spi_xfer entered ***\n")); - - immr = (immap_t *) CONFIG_SYS_IMMR; - - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - /* Board-specific: Set CS for device (ATC EEPROM) */ - immr->im_ioport.iop_pdatd &= ~0x00080000; - - /* Setting tx bd status and data length */ - tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP; - tbdf->cbd_datlen = count; - - DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", - tbdf->cbd_datlen)); - - /* Setting rx bd status and data length */ - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - rbdf->cbd_datlen = 0; /* rx length has no significance */ - - immr->im_spi.spi_spmode = SPMODE_REV | - SPMODE_MSTR | - SPMODE_EN | - SPMODE_LEN(8) | /* 8 Bits per char */ - SPMODE_PM(0x8) ; /* medium speed */ - immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */ - immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */ - - /* start spi transfer */ - DPRINT (("*** spi_xfer: Performing transfer ...\n")); - immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */ - - /* -------------------------------- - * Wait for SPI transmit to get out - * or time out (1 second = 1000 ms) - * -------------------------------- */ - for (tm=0; tm<1000; ++tm) { - if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */ - DPRINT (("*** spi_xfer: Tx buffer empty\n")); - break; - } - if ((tbdf->cbd_sc & BD_SC_READY) == 0) { - DPRINT (("*** spi_xfer: Tx BD done\n")); - break; - } - udelay (1000); - } - if (tm >= 1000) { - printf ("*** spi_xfer: Time out while xferring to/from SPI!\n"); - } - DPRINT (("*** spi_xfer: ... transfer ended\n")); - -#ifdef DEBUG - printf ("\nspi_xfer: txbuf after xfer\n"); - memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */ - printf ("spi_xfer: rxbuf after xfer\n"); - memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */ - printf ("\n"); -#endif - - /* Clear CS for device */ - immr->im_ioport.iop_pdatd |= 0x00080000; - - return count; -} -#endif /* CONFIG_SPI */ |