arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards

These board have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

4 files changed, 0 insertions, 400 deletions

diff --git a/board/BuS/eb_cpux9k2/Kconfig b/board/BuS/eb_cpux9k2/Kconfig
deleted file mode 100644
index e2a787a1a8..0000000000
--- a/board/BuS/eb_cpux9k2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_EB_CPUX9K2
-
-config SYS_BOARD
-	default "eb_cpux9k2"
-
-config SYS_VENDOR
-	default "BuS"
-
-config SYS_CONFIG_NAME
-	default "eb_cpux9k2"
-
-endif
diff --git a/board/BuS/eb_cpux9k2/MAINTAINERS b/board/BuS/eb_cpux9k2/MAINTAINERS
deleted file mode 100644
index 81c4349ac9..0000000000
--- a/board/BuS/eb_cpux9k2/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-EB_CPUX9K2 BOARD
-M:	Jens Scharsig <esw@bus-elektronik.de>
-S:	Maintained
-F:	board/BuS/eb_cpux9k2/
-F:	include/configs/eb_cpux9k2.h
-F:	configs/eb_cpux9k2_defconfig
-F:	configs/eb_cpux9k2_ram_defconfig
diff --git a/board/BuS/eb_cpux9k2/Makefile b/board/BuS/eb_cpux9k2/Makefile
deleted file mode 100644
index b2ec389ab9..0000000000
--- a/board/BuS/eb_cpux9k2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cpux9k2.o
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
deleted file mode 100644
index 3880a06897..0000000000
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
- * Jens Scharsig <esw@bus-elektronik.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <exports.h>
-#include <net.h>
-#include <netdev.h>
-#include <nand.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_mc.h>
-#include <asm/arch/at91_common.h>
-
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-#ifdef CONFIG_VIDEO
-#include <bus_vcxk.h>
-
-extern unsigned long display_width;
-extern unsigned long display_height;
-#endif
-
-#ifdef CONFIG_CMD_NAND
-void cpux9k2_nand_hw_init(void);
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIO;
-
-	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
-	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
-
-	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
-#ifdef CONFIG_CMD_NAND
-	cpux9k2_nand_hw_init();
-#endif
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	at91_seriald_hw_init();
-	return 0;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-
-int misc_init_r(void)
-{
-	uchar	mac[8];
-	uchar	tm;
-	uchar	midx;
-	uchar	macn6, macn7;
-
-	if (getenv("ethaddr") == NULL) {
-		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
-				CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-				(uchar *) &mac, sizeof(mac)) != 0) {
-			puts("Error reading MAC from EEPROM\n");
-		} else {
-			tm = 0;
-			macn6 = 0;
-			macn7 = 0xFF;
-			for (midx = 0; midx < 6; midx++) {
-				if ((mac[midx] != 0) && (mac[midx] != 0xFF))
-					tm++;
-				macn6 += mac[midx];
-				macn7 ^= mac[midx];
-			}
-			if ((macn6 != mac[6]) || (macn7 != mac[7]))
-				tm = 0;
-			if (tm)
-				eth_setenv_enetaddr("ethaddr", mac);
-			 else
-				puts("Error: invalid MAC at EEPROM\n");
-		}
-	}
-	gd->jt->do_reset = do_reset;
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-	udelay(10000);
-	eth_init();
-}
-#endif
-
-/*
- * DRAM initialisations
- */
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-/*
- * Ethernet initialisations
- */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-	rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
-	return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define	MASK_ALE	(1 << 22)	/* our ALE is AD22 */
-#define	MASK_CLE	(1 << 21)	/* our CLE is AD21 */
-
-void cpux9k2_nand_hw_init(void)
-{
-	unsigned long csr;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
-
-	/* Setup Smart Media, fitst enable the address range of CS3 */
-	writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
-
-	/* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
-	csr =	AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
-		AT91_SMC_CSR_NWS(3) |
-		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
-		AT91_SMC_CSR_WSEN;
-	writel(csr, &mc->smc.csr[3]);
-
-	writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
-	writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
-		&pio->pioc.pdr);
-
-	/* Configure PC2 as input (signal Nand READY ) */
-	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
-	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
-	writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
-
-	/* PIOC clock enabling */
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-}
-
-static void board_nand_hwcontrol(struct mtd_info *mtd,
-	int cmd, unsigned int ctrl)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	struct nand_chip *this = mtd->priv;
-	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-
-		if (ctrl & NAND_CLE)
-			IO_ADDR_W |= MASK_CLE;
-		if (ctrl & NAND_ALE)
-			IO_ADDR_W |= MASK_ALE;
-
-		if ((ctrl & NAND_NCE))
-			writel(1, &pio->pioc.codr);
-		else
-			writel(1, &pio->pioc.sodr);
-
-		this->IO_ADDR_W = (void *) IO_ADDR_W;
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int board_nand_dev_ready(struct mtd_info *mtd)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	cpux9k2_nand_hw_init();
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->cmd_ctrl = board_nand_hwcontrol;
-	nand->dev_ready = board_nand_dev_ready;
-	nand->chip_delay = 20;
-	return 0;
-}
-
-#endif
-
-#if defined(CONFIG_VIDEO)
-/*
- * drv_video_init
- * FUNCTION: initialize VCxK device
- */
-
-int drv_video_init(void)
-{
-#ifdef CONFIG_SPLASH_SCREEN
-	unsigned long splash;
-#endif
-	char *s;
-	unsigned long csr;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
-
-	printf("Init Video as ");
-	s = getenv("displaywidth");
-	if (s != NULL)
-		display_width = simple_strtoul(s, NULL, 10);
-	else
-		display_width = 256;
-	s = getenv("displayheight");
-	if (s != NULL)
-		display_height = simple_strtoul(s, NULL, 10);
-	else
-		display_height = 256;
-	printf("%ld x %ld pixel matrix\n", display_width, display_height);
-
-	/* RWH = 2 | RWS =2  | TDF = 4 | NWS = 0x6 */
-	csr =	AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
-		AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
-		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
-		AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
-	writel(csr, &mc->smc.csr[2]);
-	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
-
-	vcxk_init(display_width, display_height);
-#ifdef CONFIG_SPLASH_SCREEN
-	s = getenv("splashimage");
-	if (s != NULL) {
-		splash = simple_strtoul(s, NULL, 16);
-		printf("use splashimage: %lx\n", splash);
-		video_display_bitmap(splash, 0, 0);
-	}
-#endif
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_SOFT
-
-void i2c_init_board(void)
-{
-	u32 pin;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
-	pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
-	writel(pin, &pio->pioa.idr);
-	writel(pin, &pio->pioa.pudr);
-	writel(pin, &pio->pioa.per);
-	writel(pin, &pio->pioa.oer);
-	writel(pin, &pio->pioa.sodr);
-}
-
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_STATUS_LED
-
-void __led_toggle(led_id_t mask)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	if (readl(&pio->piod.odsr) & mask)
-		writel(mask, &pio->piod.codr);
-	else
-		writel(mask, &pio->piod.codr);
-}
-
-void __led_init(led_id_t mask, int state)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	writel(1 << ATMEL_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
-	/* Disable peripherals on LEDs */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
-	/* Enable pins as outputs */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
-	/* Turn all LEDs OFF */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
-
-	__led_set(mask, state);
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	if (state == STATUS_LED_ON)
-		writel(mask, &pio->piod.codr);
-	else
-		writel(mask, &pio->piod.sodr);
-}
-
-#endif
-
-/*---------------------------------------------------------------------------*/
-
-int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int rcode = 0;
-	ulong side;
-	ulong bright;
-
-	switch (argc) {
-	case 3:
-		side = simple_strtoul(argv[1], NULL, 10);
-		bright = simple_strtoul(argv[2], NULL, 10);
-		if ((side >= 0) && (side <= 3) &&
-				(bright >= 0) && (bright <= 1000)) {
-			vcxk_setbrightness(side, bright);
-			rcode = 0;
-		} else {
-			printf("parameters out of range\n");
-			printf("Usage:\n%s\n", cmdtp->usage);
-			rcode = 1;
-		}
-		break;
-	default:
-		printf("Usage:\n%s\n", cmdtp->usage);
-		rcode = 1;
-		break;
-	}
-	return rcode;
-}
-
-/*---------------------------------------------------------------------------*/
-
-U_BOOT_CMD(
-	bright,	3,	0,	do_brightness,
-	"bright  - sets the display brightness\n",
-	" <side> <0..1000>\n        side: 0/3=both; 1=first; 2=second\n"
-);
-
-/* EOF cpu9k2.c */