Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

22 files changed, 222 insertions, 75 deletions

diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index c5082a0925..f7d68b705e 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -30,11 +30,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 #define MP_BLOCK_3_BASE	0xFDF00000
 
@@ -50,19 +52,19 @@ static void at91cap9_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -145,9 +147,9 @@ static void at91cap9_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(1));
@@ -324,6 +326,35 @@ static void at91cap9_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
@@ -376,3 +407,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 1dec5582f7..cc2263b023 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -62,7 +62,7 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd,
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
index eb1a724ab1..7e1d46f530 100644
--- a/board/atmel/at91cap9adk/partition.c
+++ b/board/atmel/at91cap9adk/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
index c564f73a53..b89a3fd548 100644
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ b/board/atmel/at91rm9200dk/at91rm9200dk.c
@@ -47,7 +47,7 @@ int board_init (void)
 	/* so we do _nothing_ here */
 
 	/* arch number of AT91RM9200DK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
+	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
index 0513d61d73..902c3c41c0 100644
--- a/board/atmel/at91rm9200dk/flash.c
+++ b/board/atmel/at91rm9200dk/flash.c
@@ -59,7 +59,7 @@ OrgDef OrgAT49BV6416[] =
 	{ 127, 64*1024 },	/* 127 * 64 kBytes sectors */
 };
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /* AT49BV1614A Codes */
 #define FLASH_CODE1		0xAA
@@ -77,8 +77,8 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_UNLOCK_BYPASS	0x0020
 #define CMD_SECTOR_UNLOCK	0x0070
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
 
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
@@ -99,9 +99,9 @@ void flash_identification (flash_info_t * info)
 	MEM_FLASH_ADDR2 = FLASH_CODE2;
 	MEM_FLASH_ADDR1 = ID_IN_CODE;
 
-	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
-	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
-	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+	manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
+	device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
+	add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
 
 	MEM_FLASH_ADDR1 = FLASH_CODE1;
 	MEM_FLASH_ADDR2 = FLASH_CODE2;
@@ -157,7 +157,7 @@ ulong flash_init (void)
 
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_identification (&flash_info[i]);
@@ -216,18 +216,18 @@ ulong flash_init (void)
 
 	/* Protect binary boot image */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
 
 	/* Protect environment variables */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	/* Protect U-Boot gzipped image */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_U_BOOT_BASE,
-		       CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+		       CONFIG_SYS_U_BOOT_BASE,
+		       CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -345,7 +345,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -433,7 +433,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
index 975be17464..c739b116bf 100644
--- a/board/atmel/at91rm9200dk/partition.c
+++ b/board/atmel/at91rm9200dk/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/u-boot.lds b/board/atmel/at91rm9200dk/u-boot.lds
index 14cd22800b..987b07d941 100644
--- a/board/atmel/at91rm9200dk/u-boot.lds
+++ b/board/atmel/at91rm9200dk/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 06d8512cc9..ef99b8b0d5 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -30,9 +30,11 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,19 +48,19 @@ static void at91sam9260ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -90,9 +92,9 @@ static void at91sam9260ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -248,3 +250,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 665e35c54b..c5ac634aab 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9260ek/partition.c b/board/atmel/at91sam9260ek/partition.c
index 557d6954f4..2629c67186 100644
--- a/board/atmel/at91sam9260ek/partition.c
+++ b/board/atmel/at91sam9260ek/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 647aab5256..14f236da23 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -48,19 +48,19 @@ static void at91sam9261ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9261ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9261_SRAM_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
index fccb9d78de..06395ee215 100644
--- a/board/atmel/at91sam9261ek/nand.c
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
index 975be17464..c739b116bf 100644
--- a/board/atmel/at91sam9261ek/partition.c
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 927fc912c9..ebd464976c 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -31,11 +31,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -49,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -93,9 +95,9 @@ static void at91sam9263ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -258,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9263_SRAM0_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
@@ -308,3 +339,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
index 250ec7f394..3c247f6e5f 100644
--- a/board/atmel/at91sam9263ek/nand.c
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
index eb1a724ab1..7e1d46f530 100644
--- a/board/atmel/at91sam9263ek/partition.c
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 509e7c38e1..b6fef9d6f5 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -48,19 +48,19 @@ static void at91sam9rlek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9rlek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
index eb342b842f..625f6ec9bc 100644
--- a/board/atmel/at91sam9rlek/nand.c
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
index eb1a724ab1..7e1d46f530 100644
--- a/board/atmel/at91sam9rlek/partition.c
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 480d5255fd..004d8daa90 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -27,6 +27,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/portmux.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -95,8 +96,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 7be39931e5..c36cb5717b 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -26,6 +26,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/portmux.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -117,8 +118,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index e2bfd4aff2..4d380f3fac 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -55,17 +55,17 @@ unsigned long flash_init(void)
 	unsigned long addr;
 	unsigned int i;
 
-	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
 	flash_info[0].sector_count = 135;
 
-	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+	flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
 
 	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
 		flash_info[0].start[i] = addr;
 	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
 		flash_info[0].start[i] = addr;
 
-	return CFG_FLASH_SIZE;
+	return CONFIG_SYS_FLASH_SIZE;
 }
 
 void flash_print_info(flash_info_t *info)