m68k: m5253evbe: Remove this board

The m5253evbe board has been marked as orphan since June of 2014 and
should have been dropped a while ago.  Do so now.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 128 deletions

diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c
deleted file mode 100644
index 04447faaa4..0000000000
--- a/board/freescale/m5253evbe/m5253evbe.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * Hayden Fraser (Hayden.Fraser@freescale.com)
- */
-
-#include <common.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Board: ");
-	puts("Freescale MCF5253 EVBE\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
-		u32 RC, dramsize;
-
-		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
-		RC = (RC * 15) >> 4;
-
-		/* Initialize DRAM Control Register: DCR */
-		mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
-		asm("nop");
-
-		mbar_writeLong(MCFSIM_DACR0, 0x00002320);
-		asm("nop");
-
-		/* Initialize DMR0 */
-		dramsize = ((CONFIG_SYS_SDRAM_SIZE << 20) - 1) & 0xFFFC0000;
-		mbar_writeLong(MCFSIM_DMR0, dramsize | 1);
-		asm("nop");
-
-		mbar_writeLong(MCFSIM_DACR0, 0x00002328);
-		asm("nop");
-
-		/* Write to this block to initiate precharge */
-		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
-		asm("nop");
-
-		/* Set RE bit in DACR */
-		mbar_writeLong(MCFSIM_DACR0,
-			       mbar_readLong(MCFSIM_DACR0) | 0x8000);
-		asm("nop");
-
-		/* Wait for at least 8 auto refresh cycles to occur */
-		udelay(500);
-
-		/* Finish the configuration by issuing the MRS */
-		mbar_writeLong(MCFSIM_DACR0,
-			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
-		asm("nop");
-
-		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
-	}
-
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-
-	return 0;
-}
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
-
-#ifdef CONFIG_IDE
-#include <ata.h>
-int ide_preinit(void)
-{
-	return (0);
-}
-
-void ide_set_reset(int idereset)
-{
-	atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
-	long period;
-	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
-	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
-	{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
-	{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
-	{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
-	{25, 70, 20, 10, 20, 5, 10, 0, 35}	/* PIO 4 */
-	};
-
-	if (idereset) {
-		/* control reset */
-		out_8(&ata->cr, 0);
-		udelay(100);
-	} else {
-		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
-
-#define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
-
-		/*ata->ton = CALC_TIMING (180); */
-		out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
-		out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
-		out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
-		out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
-		out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
-		out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
-		out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
-
-		/* IORDY enable */
-		out_8(&ata->cr, 0x40);
-		udelay(2000);
-		/* IORDY enable */
-		setbits_8(&ata->cr, 0x01);
-	}
-}
-#endif				/* CONFIG_IDE */