diff options
| author | Peng Fan <peng.fan@nxp.com> | 2016-12-11 19:24:37 +0800 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-12-16 11:38:24 +0100 |
| commit | 47f73504d8a826a7a0c54aed974ff5457aa4c8b8 (patch) | |
| tree | 0954ef8347162fa0f82edbc888d0313ef83a853e /board/freescale/mx6sllevk/Kconfig | |
| parent | 3445373691bae4f2000b26df091a406f395df01d (diff) | |
| download | u-boot-47f73504d8a826a7a0c54aed974ff5457aa4c8b8.tar.gz | |
arm: imx: add i.MX6SLL EVK board support
Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.
Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)
CPU: Freescale i.MX6SLL rev1.0 at 792MHz
CPU: Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM: 2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale/mx6sllevk/Kconfig')
| -rw-r--r-- | board/freescale/mx6sllevk/Kconfig | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/board/freescale/mx6sllevk/Kconfig b/board/freescale/mx6sllevk/Kconfig new file mode 100644 index 0000000000..4ba9bbf141 --- /dev/null +++ b/board/freescale/mx6sllevk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX6SLLEVK + +config SYS_BOARD + default "mx6sllevk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "mx6sllevk" + +endif |