m68k: Remove M5475x boards

These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them.  As this is the last of the mcf547x_8x family of boards,
remove that support as well.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

5 files changed, 0 insertions, 412 deletions

diff --git a/board/freescale/m547xevb/Kconfig b/board/freescale/m547xevb/Kconfig
deleted file mode 100644
index 8cfe20ab8d..0000000000
--- a/board/freescale/m547xevb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M5475EVB
-
-config SYS_CPU
-	default "mcf547x_8x"
-
-config SYS_BOARD
-	default "m547xevb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M5475EVB"
-
-endif
diff --git a/board/freescale/m547xevb/MAINTAINERS b/board/freescale/m547xevb/MAINTAINERS
deleted file mode 100644
index 0d821eb011..0000000000
--- a/board/freescale/m547xevb/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-M547XEVB BOARD
-M:	TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S:	Maintained
-F:	board/freescale/m547xevb/
-F:	include/configs/M5475EVB.h
-F:	configs/M5475AFE_defconfig
-F:	configs/M5475BFE_defconfig
-F:	configs/M5475CFE_defconfig
-F:	configs/M5475DFE_defconfig
-F:	configs/M5475EFE_defconfig
-F:	configs/M5475FFE_defconfig
-F:	configs/M5475GFE_defconfig
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
deleted file mode 100644
index 29fe9dad77..0000000000
--- a/board/freescale/m547xevb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	= m547xevb.o
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
deleted file mode 100644
index 6b4fbe5c25..0000000000
--- a/board/freescale/m547xevb/README
+++ /dev/null
@@ -1,271 +0,0 @@
-Freescale MCF5475EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Jan 08, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m547xevb/m547xevb.c	Dram setup, IDE pre init, and PCI init
-- board/freescale/m547xevb/mii.c	MII init
-- board/freescale/m547xevb/Makefile	Makefile
-- board/freescale/m547xevb/config.mk	config make
-- board/freescale/m547xevb/u-boot.lds	Linker description
-
-- arch/m68k/cpu/mcf547x_8x/cpu.c			cpu specific code
-- arch/m68k/cpu/mcf547x_8x/cpu_init.c		Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf547x_8x/interrupts.c		cpu specific interrupt support
-- arch/m68k/cpu/mcf547x_8x/slicetimer.c		Timer support
-- arch/m68k/cpu/mcf547x_8x/speed.c		system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf547x_8x/Makefile		Makefile
-- arch/m68k/cpu/mcf547x_8x/config.mk		config make
-- arch/m68k/cpu/mcf547x_8x/start.S		start up assembly code
-
-- board/freescale/m547xevb/README	This readme file
-
-- drivers/dma/MCD_dmaApi.c		DMA API functions
-- drivers/dma/MCD_tasks.c		DMA Tasks
-- drivers/dma/MCD_tasksInit.c		DMA Tasks Init
-- drivers/net/fsl_mcdmafec.c		ColdFire common DMA FEC driver
-- drivers/serial/mcfuart.c		ColdFire common UART driver
-
-- include/MCD_dma.h			DMA header file
-- include/MCD_progCheck.h		DMA header file
-- include/MCD_tasksInit.h		DMA header file
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/errno.h		Error Number definition
-- include/asm-m68k/fec.h		FEC structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/fsl_mcddmafec.h	DMA FEC structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_547x_8x.h	mcf547x_8x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/m547x_8x.h		mcf547x_8x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		U-Boot structure
-
-- include/configs/M5475EVB.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF547x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M5475EVB Development Board
-CONFIG_MCF547x_8x	-- define for all MCF547x_8x CPUs
-CONFIG_M547x		-- define for all Freescale MCF547x CPUs
-CONFIG_M5475		-- define for M5475EVB board
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_FSLDMAFEC	-- define to use common dma FEC driver
-CONFIG_MII		-- enable to use MII driver
-CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
-CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP	-- set FEC timeout loop
-CONFIG_HAS_ETH1		-- define to enable second FEC in U-Boot
-
-CONFIG_CMD_USB		-- enable USB commands
-CONFIG_USB_OHCI_NEW	-- enable USB OHCI driver
-CONFIG_USB_STORAGE	-- enable USB Storage device
-CONFIG_DOS_PARTITION	-- enable DOS read/write
-
-CONFIG_SLTTMR		-- define to use SLT timer
-
-CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_PCI		-- define for PCI support
-CONFIG_PCI_PNP		-- define for Plug n play support
-CONFIG_SKIPPCI_HOSTBRIDGE	-- SKIP PCI Host bridge
-CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
-CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
-CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
-CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
-CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
-CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
-CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
-CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0xFF800000-0xFFFFFFFF (8MB)
-	DDR:		0x00000000-0x3FFFFFFF (1024MB)
-	SRAM:		0xF2000000-0xF2000FFF (4KB)
-	PCI:		0x70000000-0x8FFFFFFF (512MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
-	version) from codesourcery.com was used. Download it from:
-	http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M5475AFE_config, or	- boot 2MB, RAM 64MB
-   make M5475BFE_config, or	- boot 2MB, code 16MB, RAM 64MB
-   make M5475CFE_config, or	- boot 2MB, code 16MB, Video, USB, RAM 64MB
-   make M5475DFE_config, or	- boot 2MB, USB, RAM 64MB
-   make M5475EFE_config, or	- boot 2MB, Video, USB, RAM 64MB
-   make M5475FFE_config, or	- boot 2MB, code 32MB, Video, USB, RAM 128MB
-   make M5475GFE_config, or	- boot 2MB, RAM 64MB
-   make
-
-5. SCREEN DUMP
-==============
-5.1
-
-U-Boot 1.3.1 (Jan  8 2008 - 12:47:44)
-
-CPU:   Freescale MCF5475
-       CPU CLK 266 Mhz BUS CLK 133 Mhz
-Board: Freescale FireEngine 5475 EVB
-I2C:   ready
-DRAM:  64 MB
-FLASH: 18 MB
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC0, FEC1
--> pri
-bootdelay=1
-baudrate=115200
-ethaddr=00:e0:0c:bc:e5:60
-eth1addr=00:e0:0c:bc:e5:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=M547xEVB
-netdev=eth0
-loadaddr=10000
-u-boot=u-boot.bin
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC0
-mem=65024k
-
-Environment size: 433/8188 bytes
--> bdin
-memstart    = 0x00000000
-memsize     = 0x04000000
-flashstart  = 0xFF800000
-flashsize   = 0x01200000
-flashoffset = 0x00000000
-sramstart   = 0xF2000000
-sramsize    = 0x00001000
-mbar	    = 0xF0000000
-busfreq     = 133.333 MHz
-pcifreq     =	   0 MHz
-ethaddr     = 00:E0:0C:BC:E5:60
-eth1addr    = 00:E0:0C:BC:E5:61
-ip_addr     = 192.162.1.2
-baudrate    = 115200 bps
--> ?
-?	- alias for 'help'
-base	- print or set address offset
-bdinfo	- print Board Info structure
-boot	- boot default, i.e., run 'bootcmd'
-bootd	- boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm	- boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx	- Boot vxWorks from an ELF image
-cmp	- memory compare
-coninfo - print console devices and information
-cp	- memory copy
-crc32	- checksum calculation
-dcache	- enable or disable data cache
-echo	- echo args to console
-erase	- erase FLASH memory
-flinfo	- print FLASH memory information
-go	- start application at address 'addr'
-help	- print online help
-i2c	- I2C sub-system
-icache	- enable or disable instruction cache
-iminfo	- print header information for application image
-imls	- list all images found in flash
-itest	- return true/false on integer compare
-loadb	- load binary file over serial line (kermit mode)
-loads	- load S-Record file over serial line
-loady	- load binary file over serial line (ymodem mode)
-loop	- infinite loop on address range
-md	- memory display
-mii	- MII utility commands
-mm	- memory modify (auto-incrementing)
-mtest	- simple RAM test
-mw	- memory write (fill)
-nfs	- boot image via network using NFS protocol
-nm	- memory modify (constant address)
-pci	- list and access PCI Configuration Space
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset	- Perform RESET of the CPU
-run	- run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv	- set environment variables
-sleep	- delay execution for some time
-source	- run script from memory
-tftpboot- boot image via network using TFTP protocol
-usb	- USB sub-system
-usbboot - boot from USB device
-version - print monitor version
--> usb start
-(Re)start USB...
-USB:   OHCI pci controller (1131, 1561) found @(0:17:0)
-OHCI regs address 0x80000000
-scanning bus for devices... 2 USB Device(s) found
-       scanning bus for storage devices... 1 Storage Device(s) found
-->
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
deleted file mode 100644
index 1568f455e9..0000000000
--- a/board/freescale/m547xevb/m547xevb.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <config.h>
-#include <common.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Board: ");
-	puts("Freescale FireEngine 5475 EVB\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	siu_t *siu = (siu_t *) (MMAP_SIU);
-	sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
-	u32 dramsize, i;
-#ifdef CONFIG_SYS_DRAMSZ1
-	u32 temp;
-#endif
-
-	out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
-
-	dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-	i--;
-	out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
-
-#ifdef CONFIG_SYS_DRAMSZ1
-	temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
-	for (i = 0x13; i < 0x20; i++) {
-		if (temp == (1 << i))
-			break;
-	}
-	i--;
-	dramsize += temp;
-	out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
-#endif
-
-	out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
-	out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	/* Issue PALL */
-	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
-	/* Issue LEMR */
-	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
-	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
-
-	udelay(500);
-
-	/* Issue PALL */
-	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
-	/* Perform two refresh cycles */
-	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
-	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
-
-	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
-
-	out_be32(&sdram->ctrl,
-		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
-
-	udelay(100);
-
-	gd->ram_size = dramsize;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-extern void pci_mcf547x_8x_init(struct pci_controller *hose);
-
-void pci_init_board(void)
-{
-	pci_mcf547x_8x_init(&hose);
-}
-#endif				/* CONFIG_PCI */