diff options
| author | Stefano Babic <sbabic@denx.de> | 2012-10-16 04:07:04 +0000 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2012-10-25 11:30:49 -0700 |
| commit | 8c735b990989bcd3909081aff7e6913222ac38e9 (patch) | |
| tree | 7eeca43b178268cc939bce649c4953b942fca408 /board/htkw | |
| parent | e47c9e8608df6c95b6a324925573bac12045e059 (diff) | |
| download | u-boot-8c735b990989bcd3909081aff7e6913222ac38e9.tar.gz | |
OMAP3: mcx: updated to new hardware revision
Some GPIOs differ in the new revision board.
Previous revision are considered obsolete and
they will not anymore supported.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/htkw')
| -rw-r--r-- | board/htkw/mcx/mcx.c | 19 | ||||
| -rw-r--r-- | board/htkw/mcx/mcx.h | 2 |
2 files changed, 4 insertions, 17 deletions
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 7c9d34ab84..1f9840c34d 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -37,12 +37,12 @@ DECLARE_GLOBAL_DATA_PTR; -#define HOT_WATER_BUTTON 38 +#define HOT_WATER_BUTTON 42 #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; @@ -87,6 +87,7 @@ int board_late_init(void) return 0; setenv("bootcmd", "run swupdate"); + return 0; } #endif @@ -108,17 +109,3 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0); } #endif - -#ifdef CONFIG_USB_EHCI_OMAP -#define USB_HOST_PWR_EN 132 -int board_usb_init(void) -{ - if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) { - puts("Failed to get USB_HOST_PWR_EN pin\n"); - return -ENODEV; - } - gpio_direction_output(USB_HOST_PWR_EN, 1); - - return 0; -} -#endif diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 1003bfddd9..f9601c641f 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -96,7 +96,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \ /* GPIO_43 LCD buffer enable */ \ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ |