arm: move Logicpd's boards to board/logicpd/

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 87 deletions

diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
deleted file mode 100644
index 2ac622dbbe..0000000000
--- a/board/imx31_litekit/imx31_litekit.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int board_init (void)
-{
-	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
-	__REG(CSCR_L(0)) = 0xa0330d01;
-	__REG(CSCR_A(0)) = 0x00220800;
-
-	__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
-	__REG(CSCR_L(4)) = 0x444a4541;
-	__REG(CSCR_A(4)) = 0x44443302;
-
-	/* setup pins for UART1 */
-	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
-	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
-	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
-
-	/* SPI2 */
-	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
-	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
-	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
-	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
-	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
-	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
-	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
-
-	/* start SPI2 clock */
-	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
-
-	gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
-	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	printf("Board: i.MX31 Litekit\n");
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}