mgsuvd, mgcoge: move this 2 boards in one dir.

There are some more extensions, which are for both boards
and some more boards from this manufacturer will follow soon.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 227 deletions

diff --git a/board/mgsuvd/mgsuvd.c b/board/mgsuvd/mgsuvd.c
deleted file mode 100644
index c51ea7e76e..0000000000
--- a/board/mgsuvd/mgsuvd.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const uint sdram_table[] =
-{
-	0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x0ff77c00,
-	0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x08 Burst Read */
-	0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00,
-	0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05,
-	/* 0x10 Load mode register */
-	0x0ffffc34, 0x0ff57c04, 0x0ffffc04, 0x1ffffc05,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x18 Single Write */
-	0x0f07fc04, 0x0ffffc00, 0x00bd7c04, 0x0ffffc04,
-	0x0ff77c04, 0x1ffffc05, 0xfffffc04, 0xfffffc04,
-	/* 0x20 Burst Write */
-	0x0f07fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00,
-	0x00fffc00, 0x00fffc04, 0x0ffffc04, 0x0ff77c04,
-	0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x30 Precharge all and Refresh */
-	0x0ff77c04, 0x0ffffc04, 0x0ff5fc84, 0x0ffffc04,
-	0x0ffffc04, 0x0ffffc84, 0x1ffffc05, 0xfffffc04,
-	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	/* 0x3C Exception */
-	0x7ffffc04, 0xfffffc07, 0xfffffc04, 0xfffffc04,
-};
-
-int checkboard (void)
-{
-	puts ("Board: Keymile mgsuvd\n");
-	return (0);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-
-	upmconfig (UPMB, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CFG_MPTPR;
-
-	/*
-	 * The following value is used as an address (i.e. opcode) for
-	 * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
-	 * the port size is 32bit the SDRAM does NOT "see" the lower two
-	 * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
-	 * MICRON SDRAMs:
-	 * ->    0 00 010 0 010
-	 *       |  |   | |   +- Burst Length = 4
-	 *       |  |   | +----- Burst Type   = Sequential
-	 *       |  |   +------- CAS Latency  = 2
-	 *       |  +----------- Operating Mode = Standard
-	 *       +-------------- Write Burst Mode = Programmed Burst Length
-	 */
-	memctl->memc_mar = CFG_MAR;
-
-	/*
-	 * Map controller banks 1 to the SDRAM banks 1 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-
-	memctl->memc_mbmr = CFG_MBMR & (~(MBMR_PTBE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80802830;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80802110;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-
-	memctl->memc_mbmr |= MBMR_PTBE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 */
-	size =  get_ram_size(SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	debug ("SDRAM Bank 0: %ld MB\n", size >> 20);
-
-	return (size);
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
-	/* setup the UPIOx */
-	*(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
-	*(char *)(CFG_PIGGY_BASE + 0x03) = 0x35;
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-/*
- * update "memory" property in the blob
- */
-void ft_blob_update(void *blob, bd_t *bd)
-{
-	int ret, nodeoffset = 0;
-	ulong brg_data[1] = {0};
-	ulong memory_data[2] = {0};
-	ulong flash_data[4] = {0};
-
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
-
-		nodeoffset = fdt_path_offset (blob, "/memory");
-		if (nodeoffset >= 0) {
-			ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-						sizeof(memory_data));
-		if (ret < 0)
-			printf("ft_blob_update(): cannot set /memory/reg "
-				"property err:%s\n", fdt_strerror(ret));
-		}
-		else {
-			/* memory node is required in dts */
-			printf("ft_blob_update(): cannot find /memory node "
-			"err:%s\n", fdt_strerror(nodeoffset));
-	}
-
-	flash_data[2] = cpu_to_be32(bd->bi_flashstart);
-	flash_data[3] = cpu_to_be32(bd->bi_flashsize);
-	nodeoffset = fdt_path_offset (blob, "/localbus");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
-					sizeof(flash_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /localbus node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-	/* BRG */
-	brg_data[0] = cpu_to_be32(bd->bi_busfreq);
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
-					sizeof(brg_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /soc/cpm node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-	/* MAC Adresse */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
-					sizeof(uchar) * 6);
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup( blob, bd);
-	ft_blob_update(blob, bd);
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */