diff options
| author | Tero Kristo <t-kristo@ti.com> | 2020-06-16 11:03:06 +0300 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-06-16 17:00:12 +0530 |
| commit | 0a453751153cee25e5282fd6ab750dc53463d5d4 (patch) | |
| tree | 14cf812b22d1d7e7aa364b7ab113aa8cff495918 /board/ti | |
| parent | 00fde6b873207d4d1415bc46560633d6c925f3f3 (diff) | |
| download | u-boot-0a453751153cee25e5282fd6ab750dc53463d5d4.tar.gz | |
omap4: panda: convert to device model
Convert omap4 panda to device model.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Diffstat (limited to 'board/ti')
| -rw-r--r-- | board/ti/panda/panda.c | 50 |
1 files changed, 12 insertions, 38 deletions
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 9ebecfdbf5..232d999a29 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -8,6 +8,7 @@ #include <init.h> #include <log.h> #include <net.h> +#include <serial.h> #include <asm/mach-types.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> @@ -19,12 +20,6 @@ #include "panda_mux_data.h" -#ifdef CONFIG_USB_EHCI_HCD -#include <usb.h> -#include <asm/arch/ehci.h> -#include <asm/ehci-omap.h> -#endif - #define PANDA_ULPI_PHY_TYPE_GPIO 182 #define PANDA_BOARD_ID_1_GPIO 101 #define PANDA_ES_BOARD_ID_1_GPIO 48 @@ -55,6 +50,17 @@ int board_init(void) return 0; } +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + int board_eth_init(bd_t *bis) { return 0; @@ -305,38 +311,6 @@ void board_mmc_power_init(void) #endif #endif -#ifdef CONFIG_USB_EHCI_HCD - -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - unsigned int utmi_clk; - - /* Now we can enable our port clocks */ - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) - return ret; - - return 0; -} - -int ehci_hcd_stop(int index) -{ - return omap_ehci_hcd_stop(); -} -#endif - /* * get_board_rev() - get board revision */ |