x86: Kconfig: Divide the target selection to vendor/model

Let arch/x86/Kconfig prompt board vendor first, then select
the board model under that vendor. This way arch/x86/Kconfig
only needs concern board vendor and leave the supported target
list to board/<vendor>/Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

3 files changed, 120 insertions, 0 deletions

diff --git a/board/coreboot/Kconfig b/board/coreboot/Kconfig
new file mode 100644
index 0000000000..dc9b70f65d
--- /dev/null
+++ b/board/coreboot/Kconfig
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+if VENDOR_COREBOOT
+
+choice
+	prompt "Mainboard model"
+
+config TARGET_COREBOOT
+	bool "coreboot"
+	help
+	  This target is used for running U-Boot on top of coreboot. In
+	  this case coreboot does the early inititalisation, and U-Boot
+	  takes over once the RAM, video and CPU are fully running.
+	  U-Boot is loaded as a fallback payload from coreboot, in
+	  coreboot terminology. This method was used for the Chromebook
+	  Pixel when launched.
+
+endchoice
+
+source "board/coreboot/coreboot/Kconfig"
+
+endif
diff --git a/board/google/Kconfig b/board/google/Kconfig
new file mode 100644
index 0000000000..302f68e75e
--- /dev/null
+++ b/board/google/Kconfig
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+if VENDOR_GOOGLE
+
+choice
+	prompt "Mainboard model"
+
+config TARGET_CHROMEBOOK_LINK
+	bool "Chromebook link"
+	help
+	  This is the Chromebook Pixel released in 2013. It uses an Intel
+	  i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
+	  SDRAM. It has a Panther Point platform controller hub, PCIe
+	  WiFi and Bluetooth. It also includes a 720p webcam, USB SD
+	  reader, microphone and speakers, display port and 32GB SATA
+	  solid state drive. There is a Chrome OS EC connected on LPC,
+	  and it provides a 2560x1700 high resolution touch-enabled LCD
+	  display.
+
+config TARGET_CHROMEBOX_PANTHER
+	bool "Chromebox panther (not available)"
+	select n
+	help
+	  Note: At present this must be used with coreboot. See README.x86
+	  for instructions.
+
+	  This is the Asus Chromebox CN60 released in 2014. It uses an Intel
+	  Haswell Celeron 2955U Dual Core CPU with 2GB of SDRAM. It has a
+	  Lynx Point platform controller hub, PCIe WiFi and Bluetooth. It also
+	  includes a USB SD reader, four USB3 ports, display port and HDMI
+	  video output and a 16GB SATA solid state drive. There is no Chrome
+	  OS EC on this model.
+
+endchoice
+
+source "board/google/chromebook_link/Kconfig"
+source "board/google/chromebox_panther/Kconfig"
+
+endif
diff --git a/board/intel/Kconfig b/board/intel/Kconfig
new file mode 100644
index 0000000000..7fe21b983a
--- /dev/null
+++ b/board/intel/Kconfig
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+if VENDOR_INTEL
+
+choice
+	prompt "Mainboard model"
+
+config TARGET_CROWNBAY
+	bool "Crown Bay"
+	help
+	  This is the Intel Crown Bay Customer Reference Board. It contains
+	  the Intel Atom Processor E6xx populated on the COM Express module
+	  with 1GB DDR2 soldered down memory and a carrier board with the
+	  Intel Platform Controller Hub EG20T, other system components and
+	  peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
+
+config TARGET_GALILEO
+	bool "Galileo"
+	help
+	  This is the Intel Galileo board, which is the first in a family of
+	  Arduino-certified development and prototyping boards based on Intel
+	  architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
+	  single-core, single-thread, Intel Pentium processor instrunction set
+	  architecture (ISA) compatible, operating at speeds up to 400Mhz,
+	  along with 256MB DDR3 memory. It supports a wide range of industry
+	  standard I/O interfaces, including a full-sized mini-PCIe slot,
+	  one 100Mb Ethernet port, a microSD card slot, a USB host port and
+	  a USB client port.
+
+config TARGET_MINNOWMAX
+	bool "Minnowboard MAX"
+	help
+	  This is the Intel Minnowboard MAX. It contains an Atom E3800
+	  processor in a small form factor with Ethernet, micro-SD, USB 2,
+	  USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
+	  It requires some binary blobs - see README.x86 for details.
+
+	  Note that PCIE_ECAM_BASE is set up by the FSP so the value used
+	  by U-Boot matches that value.
+
+endchoice
+
+source "board/intel/crownbay/Kconfig"
+source "board/intel/galileo/Kconfig"
+source "board/intel/minnowmax/Kconfig"
+
+endif