diff options
| author | Tim Harvey <tharvey@gateworks.com> | 2021-07-24 10:40:44 -0700 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2021-08-09 14:46:50 +0200 |
| commit | 3ef59acdaf0a1207717150883dabaee8256f793a (patch) | |
| tree | e72101816683126fca586a6d7ae0d21f702fe436 /board | |
| parent | 744d21c126299cd6095681c5a29db34d309ab229 (diff) | |
| download | u-boot-3ef59acdaf0a1207717150883dabaee8256f793a.tar.gz | |
imx: ventana: add GW5913 support
The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
- DDR3 DRAM
- NAND FLASH (256MiB or 2048MiB)
- Gateworks System Periperhal Controller
- front panel LED's
- front panel pushbutton
- Digital I/O connector (I2C/GPIO/UART)
- u-blox Zoe-M8Q GPS
- 1x RJ45 GbE
- 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket
- Passive PoE and wide-range DC power supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/gateworks/gw_ventana/common.c | 54 | ||||
| -rw-r--r-- | board/gateworks/gw_ventana/eeprom.c | 2 | ||||
| -rw-r--r-- | board/gateworks/gw_ventana/ventana_eeprom.h | 1 |
3 files changed, 57 insertions, 0 deletions
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 19351b93d8..67f8c12147 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -843,6 +843,51 @@ struct dio_cfg gw5906_dio[] = { }, }; +struct dio_cfg gw5913_dio[] = { + { + { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, + IMX_GPIO_NR(1, 16), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, + IMX_GPIO_NR(1, 19), + { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, + 2 + }, + { + { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, + IMX_GPIO_NR(1, 17), + { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, + 3 + }, + { + { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) }, + IMX_GPIO_NR(1, 18), + { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) }, + 4 + }, + { + { IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15) }, + IMX_GPIO_NR(1, 15), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14) }, + IMX_GPIO_NR(1, 14), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05) }, + IMX_GPIO_NR(4, 5), + { 0, 0 }, + 0 + }, +}; + /* * Board Specific GPIO */ @@ -1082,6 +1127,15 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), }, + + /* GW5913 */ + { + .gpio_pads = gw5912_gpio_pads, + .num_pads = ARRAY_SIZE(gw5912_gpio_pads) / 2, + .dio_cfg = gw5913_dio, + .dio_num = ARRAY_SIZE(gw5913_dio), + .wdis = IMX_GPIO_NR(1, 0), + }, }; #define SETUP_GPIO_OUTPUT(gpio, name, level) \ diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index a4f3065c7d..d21aa3c38f 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -128,6 +128,8 @@ read_eeprom(int bus, struct ventana_board_info *info) type = GW5910; else if (info->model[4] == '1' && info->model[5] == '2') type = GW5912; + else if (info->model[4] == '1' && info->model[5] == '3') + type = GW5913; break; default: printf("EEPROM: Unknown model in EEPROM: %s\n", info->model); diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h index 9cac4a769c..2d5c27261e 100644 --- a/board/gateworks/gw_ventana/ventana_eeprom.h +++ b/board/gateworks/gw_ventana/ventana_eeprom.h @@ -123,6 +123,7 @@ enum { GW5909, GW5910, GW5912, + GW5913, GW_UNKNOWN, GW_BADCRC, }; |