Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 88 deletions

diff --git a/common/cmd_unzip.c b/common/cmd_unzip.c
deleted file mode 100644
index 0686be68ce..0000000000
--- a/common/cmd_unzip.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-
-static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unsigned long src, dst;
-	unsigned long src_len = ~0UL, dst_len = ~0UL;
-
-	switch (argc) {
-		case 4:
-			dst_len = simple_strtoul(argv[3], NULL, 16);
-			/* fall through */
-		case 3:
-			src = simple_strtoul(argv[1], NULL, 16);
-			dst = simple_strtoul(argv[2], NULL, 16);
-			break;
-		default:
-			return CMD_RET_USAGE;
-	}
-
-	if (gunzip((void *) dst, dst_len, (void *) src, &src_len) != 0)
-		return 1;
-
-	printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len);
-	setenv_hex("filesize", src_len);
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	unzip,	4,	1,	do_unzip,
-	"unzip a memory region",
-	"srcaddr dstaddr [dstsize]"
-);
-
-static int do_gzwrite(cmd_tbl_t *cmdtp, int flag,
-		      int argc, char * const argv[])
-{
-	block_dev_desc_t *bdev;
-	int ret;
-	unsigned char *addr;
-	unsigned long length;
-	unsigned long writebuf = 1<<20;
-	u64 startoffs = 0;
-	u64 szexpected = 0;
-
-	if (argc < 5)
-		return CMD_RET_USAGE;
-	ret = get_device(argv[1], argv[2], &bdev);
-	if (ret < 0)
-		return CMD_RET_FAILURE;
-
-	addr = (unsigned char *)simple_strtoul(argv[3], NULL, 16);
-	length = simple_strtoul(argv[4], NULL, 16);
-
-	if (5 < argc) {
-		writebuf = simple_strtoul(argv[5], NULL, 16);
-		if (6 < argc) {
-			startoffs = simple_strtoull(argv[6], NULL, 16);
-			if (7 < argc)
-				szexpected = simple_strtoull(argv[7],
-							     NULL, 16);
-		}
-	}
-
-	ret = gzwrite(addr, length, bdev, writebuf, startoffs, szexpected);
-
-	return ret ? CMD_RET_FAILURE : CMD_RET_SUCCESS;
-}
-
-U_BOOT_CMD(
-	gzwrite, 8, 0, do_gzwrite,
-	"unzip and write memory to block device",
-	"<interface> <dev> <addr> length [wbuf=1M [offs=0 [outsize=0]]]\n"
-	"\twbuf is the size in bytes (hex) of write buffer\n"
-	"\t\tand should be padded to erase size for SSDs\n"
-	"\toffs is the output start offset in bytes (hex)\n"
-	"\toutsize is the size of the expected output (hex bytes)\n"
-	"\t\tand is required for files with uncompressed lengths\n"
-	"\t\t4 GiB or larger\n"
-);