diff options
| author | Icenowy Zheng <icenowy@aosc.io> | 2020-11-18 10:27:00 +0000 |
|---|---|---|
| committer | Andre Przywara <andre.przywara@arm.com> | 2021-01-11 23:19:33 +0000 |
| commit | ab3b53f30f348a1f2a31109464d75c5fd4860653 (patch) | |
| tree | c1d681ac5cce5cdb82d7e02c30f8b048d50c3578 /configs/pinecube_defconfig | |
| parent | d71be1990218957b9f05dbf13a72859a2abe06d7 (diff) | |
| download | u-boot-ab3b53f30f348a1f2a31109464d75c5fd4860653.tar.gz | |
sunxi: add PineCube board
PineCube is an IP camera development kit released by Pine64.
It comes with the following compoents:
- A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC,
a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps
Ethernet port and FPC connectors for camera and daughter board.
- An OV5640-based camera module which is connected to the parallel CSI
bus of the mainboard.
- A daughterboard with several buttons, a SD slot, some IR LEDs, a
microphone and a speaker connector.
As the device tree is synchronized in a previous commit, just add it to
Makefile, create a new MAINTAINER item and provide a defconfig.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'configs/pinecube_defconfig')
| -rw-r--r-- | configs/pinecube_defconfig | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig new file mode 100644 index 0000000000..a8c404f6b1 --- /dev/null +++ b/configs/pinecube_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN8I_V3S=y +CONFIG_SUNXI_DRAM_DDR3_1333=y +CONFIG_DRAM_CLK=504 +CONFIG_DRAM_ODT_EN=y +CONFIG_I2C0_ENABLE=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube" +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_NETDEVICES is not set +CONFIG_AXP209_POWER=y +CONFIG_AXP_DCDC2_VOLT=1250 +CONFIG_AXP_DCDC3_VOLT=3300 +CONFIG_CONS_INDEX=3 |