diff options
| author | Heinrich Schuchardt <xypron.glpk@gmx.de> | 2021-01-01 00:37:05 +0100 |
|---|---|---|
| committer | Heinrich Schuchardt <xypron.glpk@gmx.de> | 2021-01-16 11:17:20 +0100 |
| commit | dd9abfec13884df0d9d30a6f79ffe80eeed9ac8c (patch) | |
| tree | f22108e5f3b8b3554ce77b6f6b8db5c153242c1a /doc/board | |
| parent | 4f792d232d33b051823d9b6a45caad3afd9788ca (diff) | |
| download | u-boot-dd9abfec13884df0d9d30a6f79ffe80eeed9ac8c.tar.gz | |
doc: sifive: fu540: fix heading levels
Two sibling headings cannot have the same name.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Diffstat (limited to 'doc/board')
| -rw-r--r-- | doc/board/sifive/fu540.rst | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst index 1ce9ab14f5..4e4c852ff3 100644 --- a/doc/board/sifive/fu540.rst +++ b/doc/board/sifive/fu540.rst @@ -12,6 +12,7 @@ of running Linux. Mainline support ---------------- + The support for following drivers are already enabled: 1. SiFive UART Driver. @@ -24,7 +25,7 @@ Booting from MMC using FSBL --------------------------- Building --------- +~~~~~~~~ 1. Add the RISC-V toolchain to your PATH. 2. Setup ARCH & cross compilation environment variable: @@ -37,7 +38,7 @@ Building 4. make Flashing --------- +~~~~~~~~ The current U-Boot port is supported in S-mode only and loaded from DRAM. @@ -63,11 +64,12 @@ copied to the first partition of the sdcard. sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024 Booting -------- +~~~~~~~ + Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -------------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: none @@ -417,7 +419,7 @@ Booting from MMC using U-Boot SPL --------------------------------- Building --------- +~~~~~~~~ Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be cloned and built for FU540 as below: @@ -441,7 +443,7 @@ This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) Flashing --------- +~~~~~~~~ ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type 5B193300-FC78-40CD-8002-E86C45580B47 @@ -471,11 +473,12 @@ Program the SD card sudo dd if=u-boot.itb of=/dev/sda seek=2082 Booting -------- +~~~~~~~ + Once you plugin the sdcard and power up, you should see the U-Boot prompt. Sample boot log from HiFive Unleashed board -------------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: none |