doc: FIT image: fix incorrect examples of DT node unit address

The DT spec demands a unit-address of a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image example files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

1 files changed, 14 insertions, 14 deletions

diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
index 0aaf47e6c6..77ddf622de 100644
--- a/doc/uImage.FIT/kernel.its
+++ b/doc/uImage.FIT/kernel.its
@@ -9,7 +9,7 @@
 	#address-cells = <1>;
 
 	images {
-		kernel@1 {
+		kernel {
 			description = "Vanilla Linux kernel";
 			data = /incbin/("./vmlinux.bin.gz");
 			type = "kernel";
@@ -18,20 +18,20 @@
 			compression = "gzip";
 			load = <00000000>;
 			entry = <00000000>;
-			hash@1 {
+			hash-1 {
 				algo = "crc32";
 			};
-			hash@2 {
+			hash-2 {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		default = "config@1";
-		config@1 {
+		default = "config-1";
+		config-1 {
 			description = "Boot Linux kernel";
-			kernel = "kernel@1";
+			kernel = "kernel";
 		};
 	};
 };
@@ -47,7 +47,7 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
 	#address-cells = <1>;
 
 	images {
-		kernel@1 {
+		kernel {
 			description = "Vanilla Linux kernel";
 			data = /incbin/("./image.bin.lzo");
 			type = "kernel";
@@ -56,12 +56,12 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
 			compression = "lzo";
 			load = <0x01000000>;
 			entry = <0x00000000>;
-			hash@2 {
+			hash-2 {
 				algo = "sha1";
 			};
 		};
 
-		setup@1 {
+		setup {
 			description = "Linux setup.bin";
 			data = /incbin/("./setup.bin");
 			type = "x86_setup";
@@ -70,18 +70,18 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
 			compression = "none";
 			load = <0x00090000>;
 			entry = <0x00090000>;
-			hash@2 {
+			hash-2 {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		default = "config@1";
-		config@1 {
+		default = "config-1";
+		config-1 {
 			description = "Boot Linux kernel";
-			kernel = "kernel@1";
-			setup = "setup@1";
+			kernel = "kernel";
+			setup = "setup";
 		};
 	};
 };