summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorPeng Fan <peng.fan@nxp.com>2020-10-14 17:12:10 +0800
committerStefano Babic <sbabic@denx.de>2020-11-01 15:37:19 +0100
commit9a1b96f1d8b69dc004458603aea2e807d1a6cf19 (patch)
tree1551ff6f037a0c62a1c239923e84e833923ff316 /doc
parent20337b75a784847da4cb85731c866de44b563fe8 (diff)
downloadu-boot-9a1b96f1d8b69dc004458603aea2e807d1a6cf19.tar.gz
doc: board: Convert i.MX6ULL EVK README to reST
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/board/freescale/index.rst1
-rw-r--r--doc/board/freescale/mx6ullevk.rst47
2 files changed, 48 insertions, 0 deletions
diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst
index 046a839a52..313cf409a6 100644
--- a/doc/board/freescale/index.rst
+++ b/doc/board/freescale/index.rst
@@ -17,3 +17,4 @@ Freescale
mx6sabreauto
mx6sabresd
mx6ul_14x14_evk
+ mx6ullevk
diff --git a/doc/board/freescale/mx6ullevk.rst b/doc/board/freescale/mx6ullevk.rst
new file mode 100644
index 0000000000..a26248a1e3
--- /dev/null
+++ b/doc/board/freescale/mx6ullevk.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6ullevk
+=========
+
+How to use U-Boot on Freescale MX6ULL 14x14 EVK
+-----------------------------------------------
+
+- First make sure you have installed the dtc package (device tree compiler):
+
+.. code-block:: bash
+
+ $ sudo apt-get install device-tree-compiler
+
+- Build U-Boot for MX6ULL 14x14 EVK:
+
+.. code-block:: bash
+
+ $ make mrproper
+ $ make mx6ull_14x14_evk_defconfig
+ $ make
+
+This generates the u-boot-dtb.imx image in the current directory.
+
+- Flash the u-boot-dtb.imx image into the micro SD card:
+
+.. code-block:: bash
+
+ $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
+
+- Jumper settings::
+
+ SW601: 0 0 1 0
+ Sw602: 1 0
+
+Where 0 means bottom position and 1 means top position (from the switch label
+numbers reference).
+
+Connect the USB cable between the EVK and the PC for the console.
+(The USB console connector is the one close the push buttons)
+
+Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
+
+The link for the board: http://www.nxp.com/products/microcontrollers-and- \
+processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \
+i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK