clk: at91: clk-utmi: add support for sama7g5

Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via
XTALF register. Values written at bits 2..0 in this register
correspond to the on board crystal oscillator frequency.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

1 files changed, 70 insertions, 1 deletions

diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index b60fd35b6b..7c8bcfb51d 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -20,7 +20,8 @@
 
 #include "pmc.h"
 
-#define UBOOT_DM_CLK_AT91_UTMI		"at91-utmi-clk"
+#define UBOOT_DM_CLK_AT91_UTMI			"at91-utmi-clk"
+#define UBOOT_DM_CLK_AT91_SAMA7G5_UTMI		"at91-sama7g5-utmi-clk"
 
 /*
  * The purpose of this clock is to generate a 480 MHz signal. A different
@@ -163,3 +164,71 @@ U_BOOT_DRIVER(at91_utmi_clk) = {
 	.ops = &utmi_ops,
 	.flags = DM_FLAG_PRE_RELOC,
 };
+
+static int clk_utmi_sama7g5_enable(struct clk *clk)
+{
+	struct clk_utmi *utmi = to_clk_utmi(clk);
+	ulong parent_rate = clk_get_parent_rate(clk);
+	unsigned int val;
+
+	switch (parent_rate) {
+	case 16000000:
+		val = 0;
+		break;
+	case 20000000:
+		val = 2;
+		break;
+	case 24000000:
+		val = 3;
+		break;
+	case 32000000:
+		val = 5;
+		break;
+	default:
+		debug("UTMICK: unsupported main_xtal rate\n");
+		return -EINVAL;
+	}
+
+	pmc_write(utmi->base, AT91_PMC_XTALF, val);
+
+	return 0;
+}
+
+static const struct clk_ops sama7g5_utmi_ops = {
+	.enable = clk_utmi_sama7g5_enable,
+	.get_rate = clk_utmi_get_rate,
+};
+
+struct clk *at91_clk_sama7g5_register_utmi(void __iomem *base,
+		const char *name, const char *parent_name)
+{
+	struct clk_utmi *utmi;
+	struct clk *clk;
+	int ret;
+
+	if (!base || !name || !parent_name)
+		return ERR_PTR(-EINVAL);
+
+	utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
+	if (!utmi)
+		return ERR_PTR(-ENOMEM);
+
+	utmi->base = base;
+
+	clk = &utmi->clk;
+	ret = clk_register(clk, UBOOT_DM_CLK_AT91_SAMA7G5_UTMI, name,
+			   parent_name);
+	if (ret) {
+		kfree(utmi);
+		clk = ERR_PTR(ret);
+	}
+
+	return clk;
+}
+
+U_BOOT_DRIVER(at91_sama7g5_utmi_clk) = {
+	.name = UBOOT_DM_CLK_AT91_SAMA7G5_UTMI,
+	.id = UCLASS_CLK,
+	.ops = &sama7g5_utmi_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};