mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.

This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 0 insertions, 2367 deletions

diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
deleted file mode 100644
index df63f27e84..0000000000
--- a/drivers/net/sk98lin/skgeinit.c
+++ /dev/null
@@ -1,2367 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgeinit.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.85 $
- * Date:	$Date: 2003/02/05 15:30:33 $
- * Purpose:	Contains functions to initialize the GE HW
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * History:
- *
- *	$Log: skgeinit.c,v $
- *	Revision 1.85  2003/02/05 15:30:33  rschmidt
- *	Corrected setting of GIHstClkFact (Host Clock Factor) and
- *	GIPollTimerVal (Descr. Poll Timer Init Value) for YUKON.
- *	Editorial changes.
- *
- *	Revision 1.84  2003/01/28 09:57:25  rschmidt
- *	Added detection of YUKON-Lite Rev. A0 (stored in GIYukonLite).
- *	Disabled Rx GMAC FIFO Flush for YUKON-Lite Rev. A0.
- *	Added support for CLK_RUN (YUKON-Lite).
- *	Added additional check of PME from D3cold for setting GIVauxAvail.
- *	Editorial changes.
- *
- *	Revision 1.83  2002/12/17 16:15:41  rschmidt
- *	Added default setting of PhyType (Copper) for YUKON.
- *	Added define around check for HW self test results.
- *	Editorial changes.
- *
- *	Revision 1.82  2002/12/05 13:40:21  rschmidt
- *	Added setting of Rx GMAC FIFO Flush Mask register.
- *	Corrected PhyType with new define SK_PHY_MARV_FIBER when
- *	YUKON Fiber board was found.
- *	Editorial changes.
- *
- *	Revision 1.81  2002/11/15 12:48:35  rschmidt
- *	Replaced message SKERR_HWI_E018 with SKERR_HWI_E024 for Rx queue error
- *	in SkGeStopPort().
- *	Added init for pAC->GIni.GIGenesis with SK_FALSE in YUKON-branch.
- *	Editorial changes.
- *
- *	Revision 1.80  2002/11/12 17:28:30  rschmidt
- *	Initialized GIPciSlot64 and GIPciClock66 in SkGeInit1().
- *	Reduced PCI FIFO watermarks for 32bit/33MHz bus in SkGeInitBmu().
- *	Editorial changes.
- *
- *	Revision 1.79  2002/10/21 09:31:02  mkarl
- *	Changed SkGeInitAssignRamToQueues(), removed call to
- *	SkGeInitAssignRamToQueues in SkGeInit1 and fixed compiler warning in
- *	SkGeInit1.
- *
- *	Revision 1.78  2002/10/16 15:55:07  mkarl
- *	Fixed a bug in SkGeInitAssignRamToQueues.
- *
- *	Revision 1.77  2002/10/14 15:07:22  rschmidt
- *	Corrected timeout handling for Rx queue in SkGeStopPort() (#10748)
- *	Editorial changes.
- *
- *	Revision 1.76  2002/10/11 09:24:38  mkarl
- *	Added check for HW self test results.
- *
- *	Revision 1.75  2002/10/09 16:56:44  mkarl
- *	Now call SkGeInitAssignRamToQueues() in Init Level 1 in order to assign
- *	the adapter memory to the queues. This default assignment is not suitable
- *	for dual net mode.
- *
- *	Revision 1.74  2002/09/12 08:45:06  rwahl
- *	Set defaults for PMSCap, PLinkSpeed & PLinkSpeedCap dependent on PHY.
- *
- *	Revision 1.73  2002/08/16 15:19:45  rschmidt
- *	Corrected check for Tx queues in SkGeCheckQSize().
- *	Added init for new entry GIGenesis and GICopperType
- *	Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
- *	Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
- *
- *	Revision 1.72  2002/08/12 13:38:55  rschmidt
- *	Added check if VAUX is available (stored in GIVauxAvail)
- *	Initialized PLinkSpeedCap in Port struct with SK_LSPEED_CAP_1000MBPS
- *	Editorial changes.
- *
- *	Revision 1.71  2002/08/08 16:32:58  rschmidt
- *	Added check for Tx queues in SkGeCheckQSize().
- *	Added start of Time Stamp Timer (YUKON) in SkGeInit2().
- *	Editorial changes.
- *
- *	Revision 1.70  2002/07/23 16:04:26  rschmidt
- *	Added init for GIWolOffs (HW-Bug in YUKON 1st rev.)
- *	Minor changes
- *
- *	Revision 1.69  2002/07/17 17:07:08  rwahl
- *	- SkGeInit1(): fixed PHY type debug output; corrected init of GIFunc
- *	  table & GIMacType.
- *	- Editorial changes.
- *
- *	Revision 1.68  2002/07/15 18:38:31  rwahl
- *	Added initialization for MAC type dependent function table.
- *
- *	Revision 1.67  2002/07/15 15:45:39  rschmidt
- *	Added Tx Store & Forward for YUKON (GMAC Tx FIFO is only 1 kB)
- *	Replaced SK_PHY_MARV by SK_PHY_MARV_COPPER
- *	Editorial changes
- *
- *	Revision 1.66  2002/06/10 09:35:08  rschmidt
- *	Replaced C++ comments (//)
- *	Editorial changes
- *
- *	Revision 1.65  2002/06/05 08:33:37  rschmidt
- *	Changed GIRamSize and Reset sequence for YUKON.
- *	SkMacInit() replaced by SkXmInitMac() resp. SkGmInitMac()
- *
- *	Revision 1.64  2002/04/25 13:03:20  rschmidt
- *	Changes for handling YUKON.
- *	Removed reference to xmac_ii.h (not necessary).
- *	Moved all defines into header file.
- *	Replaced all SkXm...() functions with SkMac...() to handle also
- *	YUKON's GMAC.
- *	Added handling for GMAC FIFO in SkGeInitMacFifo(), SkGeStopPort().
- *	Removed 'goto'-directive from SkGeCfgSync(), SkGeCheckQSize().
- *	Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
- *	SkMacFlushTxFifo().
- *	Optimized timeout handling in SkGeStopPort().
- *	Initialized PLinkSpeed in Port struct with SK_LSPEED_AUTO.
- *	Release of GMAC Link Control reset in SkGeInit1().
- *	Initialized GIChipId and GIChipRev in GE Init structure.
- *	Added GIRamSize and PhyType values for YUKON.
- *	Removed use of PRxCmd to setup XMAC.
- *	Moved setting of XM_RX_DIS_CEXT to SkXmInitMac().
- *	Use of SkGeXmitLED() only for GENESIS.
- *	Changes for V-CPU support.
- *	Editorial changes.
- *
- *	Revision 1.63  2001/04/05 11:02:09  rassmann
- *	Stop Port check of the STOP bit did not take 2/18 sec as wanted.
- *
- *	Revision 1.62  2001/02/07 07:54:21  rassmann
- *	Corrected copyright.
- *
- *	Revision 1.61  2001/01/31 15:31:40  gklug
- *	fix: problem with autosensing an SR8800 switch
- *
- *	Revision 1.60  2000/10/18 12:22:21  cgoos
- *	Added workaround for half duplex hangup.
- *
- *	Revision 1.59  2000/10/10 11:22:06  gklug
- *	add: in manual half duplex mode ignore carrier extension errors
- *
- *	Revision 1.58  2000/10/02 14:10:27  rassmann
- *	Reading BCOM PHY after releasing reset until it returns a valid value.
- *
- *	Revision 1.57  2000/08/03 14:55:28  rassmann
- *	Waiting for I2C to be ready before de-initializing adapter
- *	(prevents sensors from hanging up).
- *
- *	Revision 1.56  2000/07/27 12:16:48  gklug
- *	fix: Stop Port check of the STOP bit does now take 2/18 sec as wanted
- *
- *	Revision 1.55  1999/11/22 13:32:26  cgoos
- *	Changed license header to GPL.
- *
- *	Revision 1.54  1999/10/26 07:32:54  malthoff
- *	Initialize PHWLinkUp with SK_FALSE. Required for Diagnostics.
- *
- *	Revision 1.53  1999/08/12 19:13:50  malthoff
- *	Fix for 1000BT. Do not owerwrite XM_MMU_CMD when
- *	disabling receiver and transmitter. Other bits
- *	may be lost.
- *
- *	Revision 1.52  1999/07/01 09:29:54  gklug
- *	fix: DoInitRamQueue needs pAC
- *
- *	Revision 1.51  1999/07/01 08:42:21  gklug
- *	chg: use Store & forward for RAM buffer when Jumbos are used
- *
- *	Revision 1.50  1999/05/27 13:19:38  cgoos
- *	Added Tx PCI watermark initialization.
- *	Removed Tx RAM queue Store & Forward setting.
- *
- *	Revision 1.49  1999/05/20 14:32:45  malthoff
- *	SkGeLinkLED() is completly removed now.
- *
- *	Revision 1.48  1999/05/19 07:28:24  cgoos
- *	SkGeLinkLED no more available for drivers.
- *	Changes for 1000Base-T.
- *
- *	Revision 1.47  1999/04/08 13:57:45  gklug
- *	add: Init of new port struct fiels PLinkResCt
- *	chg: StopPort Timer check
- *
- *	Revision 1.46  1999/03/25 07:42:15  malthoff
- *	SkGeStopPort(): Add workaround for cache incoherency.
- *			Create error log entry, disable port, and
- *			exit loop if it does not terminate.
- *	Add XM_RX_LENERR_OK to the default value for the
- *	XMAC receive command register.
- *
- *	Revision 1.45  1999/03/12 16:24:47  malthoff
- *	Remove PPollRxD and PPollTxD.
- *	Add check for GIPollTimerVal.
- *
- *	Revision 1.44  1999/03/12 13:40:23  malthoff
- *	Fix: SkGeXmitLED(), SK_LED_TST mode does not work.
- *	Add: Jumbo frame support.
- *	Chg: Resolution of parameter IntTime in SkGeCfgSync().
- *
- *	Revision 1.43  1999/02/09 10:29:46  malthoff
- *	Bugfix: The previous modification again also for the second location.
- *
- *	Revision 1.42  1999/02/09 09:35:16  malthoff
- *	Bugfix: The bits '66 MHz Capable' and 'NEWCAP are reset while
- *		clearing the error bits in the PCI status register.
- *
- *	Revision 1.41  1999/01/18 13:07:02  malthoff
- *	Bugfix: Do not use CFG cycles after during Init- or Runtime, because
- *		they may not be available after Boottime.
- *
- *	Revision 1.40  1999/01/11 12:40:49  malthoff
- *	Bug fix: PCI_STATUS: clearing error bits sets the UDF bit.
- *
- *	Revision 1.39  1998/12/11 15:17:33  gklug
- *	chg: Init LipaAutoNeg with Unknown
- *
- *	Revision 1.38  1998/12/10 11:02:57  malthoff
- *	Disable Error Log Message when calling SkGeInit(level 2)
- *	more than once.
- *
- *	Revision 1.37  1998/12/07 12:18:25  gklug
- *	add: refinement of autosense mode: take into account the autoneg cap of LiPa
- *
- *	Revision 1.36  1998/12/07 07:10:39  gklug
- *	fix: init values of LinkBroken/ Capabilities for management
- *
- *	Revision 1.35  1998/12/02 10:56:20  gklug
- *	fix: do NOT init LoinkSync Counter.
- *
- *	Revision 1.34  1998/12/01 10:53:21  gklug
- *	add: init of additional Counters for workaround
- *
- *	Revision 1.33  1998/12/01 10:00:49  gklug
- *	add: init PIsave var in Port struct
- *
- *	Revision 1.32  1998/11/26 14:50:40  gklug
- *	chg: Default is autosensing with AUTOFULL mode
- *
- *	Revision 1.31  1998/11/25 15:36:16  gklug
- *	fix: do NOT stop LED Timer when port should be stopped
- *
- *	Revision 1.30  1998/11/24 13:15:28  gklug
- *	add: Init PCkeckPar struct member
- *
- *	Revision 1.29  1998/11/18 13:19:27  malthoff
- *	Disable packet arbiter timeouts on receive side.
- *	Use maximum timeout value for packet arbiter
- *	transmit timeouts.
- *	Add TestStopBit() function to handle stop RX/TX
- *	problem with active descriptor poll timers.
- *	Bug Fix: Descriptor Poll Timer not started, because
- *	GIPollTimerVal was initialized with 0.
- *
- *	Revision 1.28  1998/11/13 14:24:26  malthoff
- *	Bug Fix: SkGeStopPort() may hang if a Packet Arbiter Timout
- *	is pending or occurs while waiting for TX_STOP and RX_STOP.
- *	The PA timeout is cleared now while waiting for TX- or RX_STOP.
- *
- *	Revision 1.27  1998/11/02 11:04:36  malthoff
- *	fix the last fix
- *
- *	Revision 1.26  1998/11/02 10:37:03  malthoff
- *	Fix: SkGePollTxD() enables always the synchronounous poll timer.
- *
- *	Revision 1.25  1998/10/28 07:12:43  cgoos
- *	Fixed "LED_STOP" in SkGeLnkSyncCnt, "== SK_INIT_IO" in SkGeInit.
- *	Removed: Reset of RAM Interface in SkGeStopPort.
- *
- *	Revision 1.24  1998/10/27 08:13:12  malthoff
- *	Remove temporary code.
- *
- *	Revision 1.23  1998/10/26 07:45:03  malthoff
- *	Add Address Calculation Workaround: If the EPROM byte
- *	Id is 3, the address offset is 512 kB.
- *	Initialize default values for PLinkMode and PFlowCtrlMode.
- *
- *	Revision 1.22  1998/10/22 09:46:47  gklug
- *	fix SysKonnectFileId typo
- *
- *	Revision 1.21  1998/10/20 12:11:56  malthoff
- *	Don't dendy the Queue config if the size of the unused
- *	Rx qeueu is zero.
- *
- *	Revision 1.20  1998/10/19 07:27:58  malthoff
- *	SkGeInitRamIface() is public to be called by diagnostics.
- *
- *	Revision 1.19  1998/10/16 13:33:45  malthoff
- *	Fix: enabling descriptor polling is not allowed until
- *	the descriptor addresses are set. Descriptor polling
- *	must be handled by the driver.
- *
- *	Revision 1.18  1998/10/16 10:58:27  malthoff
- *	Remove temp. code for Diag prototype.
- *	Remove lint warning for dummy reads.
- *	Call SkGeLoadLnkSyncCnt() during SkGeInitPort().
- *
- *	Revision 1.17  1998/10/14 09:16:06  malthoff
- *	Change parameter LimCount and programming of
- *	the limit counter in SkGeCfgSync().
- *
- *	Revision 1.16  1998/10/13 09:21:16  malthoff
- *	Don't set XM_RX_SELF_RX in RxCmd Reg, because it's
- *	like a Loopback Mode in half duplex.
- *
- *	Revision 1.15  1998/10/09 06:47:40  malthoff
- *	SkGeInitMacArb(): set recovery counters init value
- *	to zero although this counters are not uesd.
- *	Bug fix in Rx Upper/Lower Pause Threshold calculation.
- *	Add XM_RX_SELF_RX to RxCmd.
- *
- *	Revision 1.14  1998/10/06 15:15:53  malthoff
- *	Make sure no pending IRQ is cleared in SkGeLoadLnkSyncCnt().
- *
- *	Revision 1.13  1998/10/06 14:09:36  malthoff
- *	Add SkGeLoadLnkSyncCnt(). Modify
- *	the 'port stopped' condition according
- *	to the current problem report.
- *
- *	Revision 1.12  1998/10/05 08:17:21  malthoff
- *	Add functions: SkGePollRxD(), SkGePollTxD(),
- *	DoCalcAddr(), SkGeCheckQSize(),
- *	DoInitRamQueue(), and SkGeCfgSync().
- *	Add coding for SkGeInitMacArb(), SkGeInitPktArb(),
- *	SkGeInitMacFifo(), SkGeInitRamBufs(),
- *	SkGeInitRamIface(), and SkGeInitBmu().
- *
- *	Revision 1.11  1998/09/29 08:26:29  malthoff
- *	bug fix: SkGeInit0() 'i' should be increment.
- *
- *	Revision 1.10  1998/09/28 13:19:01  malthoff
- *	Coding time: Save the done work.
- *	Modify SkGeLinkLED(), add SkGeXmitLED(),
- *	define SkGeCheckQSize(), SkGeInitMacArb(),
- *	SkGeInitPktArb(), SkGeInitMacFifo(),
- *	SkGeInitRamBufs(), SkGeInitRamIface(),
- *	and SkGeInitBmu(). Do coding for SkGeStopPort(),
- *	SkGeInit1(), SkGeInit2(), and SkGeInit3().
- *	Do coding for SkGeDinit() and SkGeInitPort().
- *
- *	Revision 1.9  1998/09/16 14:29:05  malthoff
- *	Some minor changes.
- *
- *	Revision 1.8  1998/09/11 05:29:14  gklug
- *	add: init state of a port
- *
- *	Revision 1.7  1998/09/04 09:26:25  malthoff
- *	Short temporary modification.
- *
- *	Revision 1.6  1998/09/04 08:27:59  malthoff
- *	Remark the do-while in StopPort() because it never ends
- *	without a GE adapter.
- *
- *	Revision 1.5  1998/09/03 14:05:45  malthoff
- *	Change comment for SkGeInitPort(). Do not
- *	repair the queue sizes if invalid.
- *
- *	Revision 1.4  1998/09/03 10:03:19  malthoff
- *	Implement the new interface according to the
- *	reviewed interface specification.
- *
- *	Revision 1.3  1998/08/19 09:11:25  gklug
- *	fix: struct are removed from c-source (see CCC)
- *
- *	Revision 1.2  1998/07/28 12:33:58  malthoff
- *	Add 'IoC' parameter in function declaration and SK IO macros.
- *
- *	Revision 1.1  1998/07/23 09:48:57  malthoff
- *	Creation. First dummy 'C' file.
- *	SkGeInit(Level 0) is card_start for GE.
- *	SkGeDeInit() is card_stop for GE.
- *
- *
- ******************************************************************************/
-
-#include <config.h>
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* global variables ***********************************************************/
-
-/* local variables ************************************************************/
-
-static const char SysKonnectFileId[] =
-	"@(#)$Id: skgeinit.c,v 1.85 2003/02/05 15:30:33 rschmidt Exp $ (C) SK ";
-
-struct s_QOffTab {
-	int	RxQOff;		/* Receive Queue Address Offset */
-	int	XsQOff;		/* Sync Tx Queue Address Offset */
-	int	XaQOff;		/* Async Tx Queue Address Offset */
-};
-static struct s_QOffTab QOffTab[] = {
-	{Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
-};
-
-
-/******************************************************************************
- *
- *	SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
- *
- * Description:
- *	Enable or disable the descriptor polling of the receive descriptor
- *	ring (RxD) for port 'Port'.
- *	The new configuration is *not* saved over any SkGeStopPort() and
- *	SkGeInitPort() calls.
- *
- * Returns:
- *	nothing
- */
-void SkGePollRxD(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL PollRxD)	/* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
-	SK_GEPORT *pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
-		CSR_ENA_POL : CSR_DIS_POL);
-}	/* SkGePollRxD */
-
-
-/******************************************************************************
- *
- *	SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
- *
- * Description:
- *	Enable or disable the descriptor polling of the transmit descriptor
- *	ring(s) (TxD) for port 'Port'.
- *	The new configuration is *not* saved over any SkGeStopPort() and
- *	SkGeInitPort() calls.
- *
- * Returns:
- *	nothing
- */
-void SkGePollTxD(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL PollTxD)	/* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
-	SK_GEPORT *pPrt;
-	SK_U32	DWord;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	DWord = (PollTxD) ? CSR_ENA_POL : CSR_DIS_POL;
-
-	if (pPrt->PXSQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
-	}
-
-	if (pPrt->PXAQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
-	}
-}	/* SkGePollTxD */
-
-
-/******************************************************************************
- *
- *	SkGeYellowLED() - Switch the yellow LED on or off.
- *
- * Description:
- *	Switch the yellow LED on or off.
- *
- * Note:
- *	This function may be called any time after SkGeInit(Level 1).
- *
- * Returns:
- *	nothing
- */
-void SkGeYellowLED(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		State)		/* yellow LED state, 0 = OFF, 0 != ON */
-{
-	if (State == 0) {
-		/* Switch yellow LED OFF */
-		SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
-	}
-	else {
-		/* Switch yellow LED ON */
-		SK_OUT8(IoC, B0_LED, LED_STAT_ON);
-	}
-}	/* SkGeYellowLED */
-
-
-/******************************************************************************
- *
- *	SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
- *
- * Description:
- *	The Rx or Tx LED which is specified by 'Led' will be
- *	enabled, disabled or switched on in test mode.
- *
- * Note:
- *	'Led' must contain the address offset of the LEDs INI register.
- *
- * Usage:
- *	SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
- *
- * Returns:
- *	nothing
- */
-void SkGeXmitLED(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Led,		/* offset to the LED Init Value register */
-int		Mode)		/* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
-{
-	SK_U32	LedIni;
-
-	switch (Mode) {
-	case SK_LED_ENA:
-		LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-		SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
-		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
-		break;
-	case SK_LED_TST:
-		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
-		SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
-		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
-		break;
-	case SK_LED_DIS:
-	default:
-		/*
-		 * Do NOT stop the LED Timer here. The LED might be
-		 * in on state. But it needs to go off.
-		 */
-		SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
-		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
-		break;
-	}
-
-	/*
-	 * 1000BT: The Transmit LED is driven by the PHY.
-	 * But the default LED configuration is used for
-	 * Level One and Broadcom PHYs.
-	 * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
-	 * (In this case it has to be added here. But we will see. XXX)
-	 */
-}	/* SkGeXmitLED */
-
-
-/******************************************************************************
- *
- *	DoCalcAddr() - Calculates the start and the end address of a queue.
- *
- * Description:
- *	This function calculates the start and the end address of a queue.
- *  Afterwards the 'StartVal' is incremented to the next start position.
- *	If the port is already initialized the calculated values
- *	will be checked against the configured values and an
- *	error will be returned, if they are not equal.
- *	If the port is not initialized the values will be written to
- *	*StartAdr and *EndAddr.
- *
- * Returns:
- *	0:	success
- *	1:	configuration error
- */
-static int DoCalcAddr(
-SK_AC		*pAC,			/* adapter context */
-SK_GEPORT	*pPrt,			/* port index */
-int			QuSize,			/* size of the queue to configure in kB */
-SK_U32		*StartVal,		/* start value for address calculation */
-SK_U32		*QuStartAddr,	/* start addr to calculate */
-SK_U32		*QuEndAddr)		/* end address to calculate */
-{
-	SK_U32	EndVal;
-	SK_U32	NextStart;
-	int		Rtv;
-
-	Rtv = 0;
-	if (QuSize == 0) {
-		EndVal = *StartVal;
-		NextStart = EndVal;
-	}
-	else {
-		EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
-		NextStart = EndVal + 1;
-	}
-
-	if (pPrt->PState >= SK_PRT_INIT) {
-		if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
-			Rtv = 1;
-		}
-	}
-	else {
-		*QuStartAddr = *StartVal;
-		*QuEndAddr = EndVal;
-	}
-
-	*StartVal = NextStart;
-	return(Rtv);
-}	/* DoCalcAddr */
-
-/******************************************************************************
- *
- *	SkGeInitAssignRamToQueues() - allocate default queue sizes
- *
- * Description:
- *	This function assigns the memory to the different queues and ports.
- *	When DualNet is set to SK_TRUE all ports get the same amount of memory.
- *  Otherwise the first port gets most of the memory and all the
- *	other ports just the required minimum.
- *	This function can only be called when pAC->GIni.GIRamSize and
- *	pAC->GIni.GIMacsFound have been initialized, usually this happens
- *	at init level 1
- *
- * Returns:
- *	0 - ok
- *	1 - invalid input values
- *	2 - not enough memory
- */
-
-int SkGeInitAssignRamToQueues(
-SK_AC	*pAC,			/* Adapter context */
-int		ActivePort,		/* Active Port in RLMT mode */
-SK_BOOL	DualNet)		/* adapter context */
-{
-	int	i;
-	int	UsedKilobytes;			/* memory already assigned */
-	int	ActivePortKilobytes;	/* memory available for active port */
-	SK_GEPORT *pGePort;
-
-	UsedKilobytes = 0;
-
-	if (ActivePort >= pAC->GIni.GIMacsFound) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
-			ActivePort));
-		return(1);
-	}
-	if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
-		((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
-			 pAC->GIni.GIRamSize));
-		return(2);
-	}
-
-
-	if (DualNet) {
-		/* every port gets the same amount of memory */
-		ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-			pGePort = &pAC->GIni.GP[i];
-
-			/* take away the minimum memory for active queues */
-			ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
-
-			/* receive queue gets the minimum + 80% of the rest */
-			pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
-				ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
-				+ SK_MIN_RXQ_SIZE;
-
-			ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
-			/* synchronous transmit queue */
-			pGePort->PXSQSize = 0;
-
-			/* asynchronous transmit queue */
-			pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
-				SK_MIN_TXQ_SIZE);
-		}
-	}
-	else {
-		/* Rlmt Mode or single link adapter */
-
-		/* Set standby queue size defaults for all standby ports */
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-			if (i != ActivePort) {
-				pGePort = &pAC->GIni.GP[i];
-
-				pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
-				pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
-				pGePort->PXSQSize = 0;
-
-				/* Count used RAM */
-				UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
-			}
-		}
-		/* what's left? */
-		ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
-
-		/* assign it to the active port */
-		/* first take away the minimum memory */
-		ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
-		pGePort = &pAC->GIni.GP[ActivePort];
-
-		/* receive queue get's the minimum + 80% of the rest */
-		pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
-			(unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
-
-		ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
-		/* synchronous transmit queue */
-		pGePort->PXSQSize = 0;
-
-		/* asynchronous transmit queue */
-		pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
-			SK_MIN_TXQ_SIZE;
-	}
-#ifdef VCPU
-	VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
-		pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
-#endif /* VCPU */
-
-	return(0);
-}	/* SkGeInitAssignRamToQueues */
-
-/******************************************************************************
- *
- *	SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
- *
- * Description:
- *	This function verifies the Queue Size Configuration specified
- *	in the variables PRxQSize, PXSQSize, and PXAQSize of all
- *	used ports.
- *	This requirements must be fullfilled to have a valid configuration:
- *		- The size of all queues must not exceed GIRamSize.
- *		- The queue sizes must be specified in units of 8 kB.
- *		- The size of Rx queues of available ports must not be
- *		  smaller than 16 kB.
- *		- The size of at least one Tx queue (synch. or asynch.)
- *        of available ports must not be smaller than 16 kB
- *        when Jumbo Frames are used.
- *		- The RAM start and end addresses must not be changed
- *		  for ports which are already initialized.
- *	Furthermore SkGeCheckQSize() defines the Start and End Addresses
- *  of all ports and stores them into the HWAC port	structure.
- *
- * Returns:
- *	0:	Queue Size Configuration valid
- *	1:	Queue Size Configuration invalid
- */
-static int SkGeCheckQSize(
-SK_AC	 *pAC,		/* adapter context */
-int		 Port)		/* port index */
-{
-	SK_GEPORT *pPrt;
-	int	UsedMem;	/* total memory used (max. found ports) */
-	int	i;
-	int	Rtv;
-	int	Rtv2;
-	SK_U32	StartAddr;
-
-	UsedMem = 0;
-	Rtv = 0;
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
-			(pPrt->PXSQSize & QZ_UNITS) != 0 ||
-			(pPrt->PXAQSize & QZ_UNITS) != 0) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
-			return(1);
-		}
-
-		if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
-			return(1);
-		}
-
-		/*
-		 * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
-		 * if Jumbo Frames are used, this size has to be >= 16 kB.
-		 */
-		if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
-			(pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
-	    ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
-			 (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
-				return(1);
-		}
-
-		UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
-	}
-
-	if (UsedMem > pAC->GIni.GIRamSize) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
-		return(1);
-	}
-
-	/* Now start address calculation */
-	StartAddr = pAC->GIni.GIRamOffs;
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		/* Calculate/Check values for the receive queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
-			&pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
-		Rtv |= Rtv2;
-
-		/* Calculate/Check values for the synchronous Tx queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
-			&pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
-		Rtv |= Rtv2;
-
-		/* Calculate/Check values for the asynchronous Tx queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
-			&pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
-		Rtv |= Rtv2;
-
-		if (Rtv) {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
-			return(1);
-		}
-	}
-
-	return(0);
-}	/* SkGeCheckQSize */
-
-
-/******************************************************************************
- *
- *	SkGeInitMacArb() - Initialize the MAC Arbiter
- *
- * Description:
- *	This function initializes the MAC Arbiter.
- *	It must not be called if there is still an
- *	initialized or active port.
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitMacArb(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
-
-	SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
-
-	/* recovery values are needed for XMAC II Rev. B2 only */
-	/* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
-
-	/*
-	 * There is no start or enable button to push, therefore
-	 * the MAC arbiter is configured and enabled now.
-	 */
-}	/* SkGeInitMacArb */
-
-
-/******************************************************************************
- *
- *	SkGeInitPktArb() - Initialize the Packet Arbiter
- *
- * Description:
- *	This function initializes the Packet Arbiter.
- *	It must not be called if there is still an
- *	initialized or active port.
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitPktArb(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
-
-	/*
-	 * enable timeout timers if jumbo frames not used
-	 * NOTE: the packet arbiter timeout interrupt is needed for
-	 * half duplex hangup workaround
-	 */
-	if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
-		if (pAC->GIni.GIMacsFound == 1) {
-			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
-		}
-		else {
-			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
-		}
-	}
-}	/* SkGeInitPktArb */
-
-
-/******************************************************************************
- *
- *	SkGeInitMacFifo() - Initialize the MAC FIFOs
- *
- * Description:
- *	Initialize all MAC FIFOs of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitMacFifo(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_U16	Word;
-#ifdef VCPU
-	SK_U32	DWord;
-#endif /* VCPU */
-	/*
-	 * For each FIFO:
-	 *	- release local reset
-	 *	- use default value for MAC FIFO size
-	 *	- setup defaults for the control register
-	 *	- enable the FIFO
-	 */
-
-	Word = GMF_RX_CTRL_DEF;
-
-	if (pAC->GIni.GIGenesis) {
-		/* Configure Rx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
-		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
-
-		/* Configure Tx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
-		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
-
-		/* Enable frame flushing if jumbo frames used */
-		if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
-			SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
-		}
-	}
-	else {
-		/* set Rx GMAC FIFO Flush Mask */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
-
-		if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-
-			Word &= ~GMF_RX_F_FL_ON;
-		}
-
-		/* Configure Rx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
-
-		/* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
-
-		/* Configure Tx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
-
-#ifdef VCPU
-		SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
-		SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
-#endif /* VCPU */
-
-		/* set Tx GMAC FIFO Almost Empty Threshold */
-/*		SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
-	}
-}	/* SkGeInitMacFifo */
-
-
-/******************************************************************************
- *
- *	SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
- *
- * Description:
- *	This function starts the Link Sync Counter of the specified
- *	port and enables the generation of an Link Sync IRQ.
- *	The Link Sync Counter may be used to detect an active link,
- *	if autonegotiation is not used.
- *
- * Note:
- *	o To ensure receiving the Link Sync Event the LinkSyncCounter
- *	  should be initialized BEFORE clearing the XMAC's reset!
- *	o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
- *	  function.
- *
- * Returns:
- *	nothing
- */
-void SkGeLoadLnkSyncCnt(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U32	CntVal)		/* Counter value */
-{
-	SK_U32	OrgIMsk;
-	SK_U32	NewIMsk;
-	SK_U32	ISrc;
-	SK_BOOL	IrqPend;
-
-	/* stop counter */
-	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
-
-	/*
-	 * ASIC problem:
-	 * Each time starting the Link Sync Counter an IRQ is generated
-	 * by the adapter. See problem report entry from 21.07.98
-	 *
-	 * Workaround:	Disable Link Sync IRQ and clear the unexpeced IRQ
-	 *		if no IRQ is already pending.
-	 */
-	IrqPend = SK_FALSE;
-	SK_IN32(IoC, B0_ISRC, &ISrc);
-	SK_IN32(IoC, B0_IMSK, &OrgIMsk);
-	if (Port == MAC_1) {
-		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
-		if ((ISrc & IS_LNK_SYNC_M1) != 0) {
-			IrqPend = SK_TRUE;
-		}
-	}
-	else {
-		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
-		if ((ISrc & IS_LNK_SYNC_M2) != 0) {
-			IrqPend = SK_TRUE;
-		}
-	}
-	if (!IrqPend) {
-		SK_OUT32(IoC, B0_IMSK, NewIMsk);
-	}
-
-	/* load counter */
-	SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
-
-	/* start counter */
-	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
-
-	if (!IrqPend) {
-		/* clear the unexpected IRQ, and restore the interrupt mask */
-		SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
-		SK_OUT32(IoC, B0_IMSK, OrgIMsk);
-	}
-}	/* SkGeLoadLnkSyncCnt*/
-
-
-/******************************************************************************
- *
- *	SkGeCfgSync() - Configure synchronous bandwidth for this port.
- *
- * Description:
- *	This function may be used to configure synchronous bandwidth
- *	to the specified port. This may be done any time after
- *	initializing the port. The configuration values are NOT saved
- *	in the HWAC port structure and will be overwritten any
- *	time when stopping and starting the port.
- *	Any values for the synchronous configuration will be ignored
- *	if the size of the synchronous queue is zero!
- *
- *	The default configuration for the synchronous service is
- *	TXA_ENA_FSYNC. This means if the size of
- *	the synchronous queue is unequal zero but no specific
- *	synchronous bandwidth is configured, the synchronous queue
- *	will always have the 'unlimited' transmit priority!
- *
- *	This mode will be restored if the synchronous bandwidth is
- *	deallocated ('IntTime' = 0 and 'LimCount' = 0).
- *
- * Returns:
- *	0:	success
- *	1:	parameter configuration error
- *	2:	try to configure quality of service although no
- *		synchronous queue is configured
- */
-int SkGeCfgSync(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U32	IntTime,	/* Interval Timer Value in units of 8ns */
-SK_U32	LimCount,	/* Number of bytes to transfer during IntTime */
-int		SyncMode)	/* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
-{
-	int Rtv;
-
-	Rtv = 0;
-
-	/* check the parameters */
-	if (LimCount > IntTime ||
-		(LimCount == 0 && IntTime != 0) ||
-		(LimCount != 0 && IntTime == 0)) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
-		return(1);
-	}
-
-	if (pAC->GIni.GP[Port].PXSQSize == 0) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
-		return(2);
-	}
-
-	/* calculate register values */
-	IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
-	LimCount = LimCount / 8;
-
-	if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
-		return(1);
-	}
-
-	/*
-	 * - Enable 'Force Sync' to ensure the synchronous queue
-	 *   has the priority while configuring the new values.
-	 * - Also 'disable alloc' to ensure the settings complies
-	 *   to the SyncMode parameter.
-	 * - Disable 'Rate Control' to configure the new values.
-	 * - write IntTime and LimCount
-	 * - start 'Rate Control' and disable 'Force Sync'
-	 *   if Interval Timer or Limit Counter not zero.
-	 */
-	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-		TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
-	SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
-	SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
-
-	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-		(SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
-
-	if (IntTime != 0 || LimCount != 0) {
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
-	}
-
-	return(0);
-}	/* SkGeCfgSync */
-
-
-/******************************************************************************
- *
- *	DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
- *
- * Desccription:
- *	If the queue is used, enable and initialize it.
- *	Make sure the queue is still reset, if it is not used.
- *
- * Returns:
- *	nothing
- */
-static void DoInitRamQueue(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* IO context */
-int		QuIoOffs,		/* Queue IO Address Offset */
-SK_U32	QuStartAddr,	/* Queue Start Address */
-SK_U32	QuEndAddr,		/* Queue End Address */
-int		QuType)			/* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
-{
-	SK_U32	RxUpThresVal;
-	SK_U32	RxLoThresVal;
-
-	if (QuStartAddr != QuEndAddr) {
-		/* calculate thresholds, assume we have a big Rx queue */
-		RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
-		RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
-
-		/* build HW address format */
-		QuStartAddr = QuStartAddr / 8;
-		QuEndAddr = QuEndAddr / 8;
-
-		/* release local reset */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
-
-		/* configure addresses */
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
-
-		switch (QuType) {
-		case SK_RX_SRAM_Q:
-			/* configure threshold for small Rx Queue */
-			RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
-
-			/* continue with SK_RX_BRAM_Q */
-		case SK_RX_BRAM_Q:
-			/* write threshold for Rx Queue */
-
-			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
-			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
-
-			/* the high priority threshold not used */
-			break;
-		case SK_TX_RAM_Q:
-			/*
-			 * Do NOT use Store & Forward under normal operation due to
-			 * performance optimization (GENESIS only).
-			 * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
-			 * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
-			 * we NEED Store & Forward of the RAM buffer.
-			 */
-			if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
-				!pAC->GIni.GIGenesis) {
-				/* enable Store & Forward Mode for the Tx Side */
-				SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
-			}
-			break;
-		}
-
-		/* set queue operational */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
-	}
-	else {
-		/* ensure the queue is still disabled */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
-	}
-}	/* DoInitRamQueue */
-
-
-/******************************************************************************
- *
- *	SkGeInitRamBufs() - Initialize the RAM Buffer Queues
- *
- * Description:
- *	Initialize all RAM Buffer Queues of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitRamBufs(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT *pPrt;
-	int RxQType;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
-		RxQType = SK_RX_SRAM_Q;		/* small Rx Queue */
-	} else {
-		RxQType = SK_RX_BRAM_Q;		/* big Rx Queue */
-	}
-
-	DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
-		pPrt->PRxQRamEnd, RxQType);
-
-	DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
-		pPrt->PXsQRamEnd, SK_TX_RAM_Q);
-
-	DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
-		pPrt->PXaQRamEnd, SK_TX_RAM_Q);
-
-}	/* SkGeInitRamBufs */
-
-
-/******************************************************************************
- *
- *	SkGeInitRamIface() - Initialize the RAM Interface
- *
- * Description:
- *	This function initializes the Adapters RAM Interface.
- *
- * Note:
- *	This function is used in the diagnostics.
- *
- * Returns:
- *	nothing
- */
-void SkGeInitRamIface(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
-
-}	/* SkGeInitRamIface */
-
-
-/******************************************************************************
- *
- *	SkGeInitBmu() - Initialize the BMU state machines
- *
- * Description:
- *	Initialize all BMU state machines of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitBmu(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U32		RxWm;
-	SK_U32		TxWm;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	RxWm = SK_BMU_RX_WM;
-	TxWm = SK_BMU_TX_WM;
-
-	if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
-		/* for better performance */
-		RxWm /= 2;
-		TxWm /= 2;
-	}
-
-	/* Rx Queue: Release all local resets and set the watermark */
-	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
-	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
-
-	/*
-	 * Tx Queue: Release all local resets if the queue is used !
-	 *		set watermark
-	 */
-	if (pPrt->PXSQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
-	}
-
-	if (pPrt->PXAQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
-	}
-	/*
-	 * Do NOT enable the descriptor poll timers here, because
-	 * the descriptor addresses are not specified yet.
-	 */
-}	/* SkGeInitBmu */
-
-
-/******************************************************************************
- *
- *	TestStopBit() -	Test the stop bit of the queue
- *
- * Description:
- *	Stopping a queue is not as simple as it seems to be.
- *	If descriptor polling is enabled, it may happen
- *	that RX/TX stop is done and SV idle is NOT set.
- *	In this case we have to issue another stop command.
- *
- * Returns:
- *	The queues control status register
- */
-static SK_U32 TestStopBit(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		QuIoOffs)	/* Queue IO Address Offset */
-{
-	SK_U32	QuCsr;	/* CSR contents */
-
-	SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
-
-	if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
-		/* Stop Descriptor overridden by start command */
-		SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
-
-		SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
-	}
-
-	return(QuCsr);
-}	/* TestStopBit */
-
-
-/******************************************************************************
- *
- *	SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
- *
- * Description:
- *	After calling this function the descriptor rings and Rx and Tx
- *	queues of this port may be reconfigured.
- *
- *	It is possible to stop the receive and transmit path separate or
- *	both together.
- *
- *	Dir =	SK_STOP_TX	Stops the transmit path only and resets the MAC.
- *				The receive queue is still active and
- *				the pending Rx frames may be still transferred
- *				into the RxD.
- *		SK_STOP_RX	Stop the receive path. The tansmit path
- *				has to be stopped once before.
- *		SK_STOP_ALL	SK_STOP_TX + SK_STOP_RX
- *
- *	RstMode = SK_SOFT_RST	Resets the MAC. The PHY is still alive.
- *			SK_HARD_RST	Resets the MAC and the PHY.
- *
- * Example:
- *	1) A Link Down event was signaled for a port. Therefore the activity
- *	of this port should be stopped and a hardware reset should be issued
- *	to enable the workaround of XMAC errata #2. But the received frames
- *	should not be discarded.
- *		...
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
- *		(transfer all pending Rx frames)
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
- *		...
- *
- *	2) An event was issued which request the driver to switch
- *	the 'virtual active' link to an other already active port
- *	as soon as possible. The frames in the receive queue of this
- *	port may be lost. But the PHY must not be reset during this
- *	event.
- *		...
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
- *		...
- *
- * Extended Description:
- *	If SK_STOP_TX is set,
- *		o disable the MAC's receive and transmitter to prevent
- *		  from sending incomplete frames
- *		o stop the port's transmit queues before terminating the
- *		  BMUs to prevent from performing incomplete PCI cycles
- *		  on the PCI bus
- *		- The network Rx and Tx activity and PCI Tx transfer is
- *		  disabled now.
- *		o reset the MAC depending on the RstMode
- *		o Stop Interval Timer and Limit Counter of Tx Arbiter,
- *		  also disable Force Sync bit and Enable Alloc bit.
- *		o perform a local reset of the port's Tx path
- *			- reset the PCI FIFO of the async Tx queue
- *			- reset the PCI FIFO of the sync Tx queue
- *			- reset the RAM Buffer async Tx queue
- *			- reset the RAM Buffer sync Tx queue
- *			- reset the MAC Tx FIFO
- *		o switch Link and Tx LED off, stop the LED counters
- *
- *	If SK_STOP_RX is set,
- *		o stop the port's receive queue
- *		- The path data transfer activity is fully stopped now.
- *		o perform a local reset of the port's Rx path
- *			- reset the PCI FIFO of the Rx queue
- *			- reset the RAM Buffer receive queue
- *			- reset the MAC Rx FIFO
- *		o switch Rx LED off, stop the LED counter
- *
- *	If all ports are stopped,
- *		o reset the RAM Interface.
- *
- * Notes:
- *	o This function may be called during the driver states RESET_PORT and
- *	  SWITCH_PORT.
- */
-void SkGeStopPort(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* I/O context */
-int		Port,	/* port to stop (MAC_1 + n) */
-int		Dir,	/* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
-int		RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
-{
-#ifndef SK_DIAG
-	SK_EVPARA Para;
-#endif /* !SK_DIAG */
-	SK_GEPORT *pPrt;
-	SK_U32	DWord;
-	SK_U32	XsCsr;
-	SK_U32	XaCsr;
-	SK_U64	ToutStart;
-	int		i;
-	int		ToutCnt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((Dir & SK_STOP_TX) != 0) {
-		/* disable receiver and transmitter */
-		SkMacRxTxDisable(pAC, IoC, Port);
-
-		/* stop both transmit queues */
-		/*
-		 * If the BMU is in the reset state CSR_STOP will terminate
-		 * immediately.
-		 */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
-
-		ToutStart = SkOsGetTime(pAC);
-		ToutCnt = 0;
-		do {
-			/*
-			 * Clear packet arbiter timeout to make sure
-			 * this loop will terminate.
-			 */
-			SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_TX1 :
-				PA_CLR_TO_TX2);
-
-			/*
-			 * If the transfer stucks at the MAC the STOP command will not
-			 * terminate if we don't flush the XMAC's transmit FIFO !
-			 */
-			SkMacFlushTxFifo(pAC, IoC, Port);
-
-			XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
-			XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
-
-			if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
-				/*
-				 * Timeout of 1/18 second reached.
-				 * This needs to be checked at 1/18 sec only.
-				 */
-				ToutCnt++;
-				if (ToutCnt > 1) {
-					/* Might be a problem when the driver event handler
-					 * calls StopPort again. XXX.
-					 */
-
-					/* Fatal Error, Loop aborted */
-					SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
-						SKERR_HWI_E018MSG);
-#ifndef SK_DIAG
-					Para.Para64 = Port;
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-#endif /* !SK_DIAG */
-					return;
-				}
-				/*
-				 * Cache incoherency workaround: Assume a start command
-				 * has been lost while sending the frame.
-				 */
-				ToutStart = SkOsGetTime(pAC);
-
-				if ((XsCsr & CSR_STOP) != 0) {
-					SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
-				}
-				if ((XaCsr & CSR_STOP) != 0) {
-					SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
-				}
-			}
-
-			/*
-			 * Because of the ASIC problem report entry from 21.08.1998 it is
-			 * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
-			 */
-		} while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
-				 (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
-		/* Reset the MAC depending on the RstMode */
-		if (RstMode == SK_SOFT_RST) {
-			SkMacSoftRst(pAC, IoC, Port);
-		}
-		else {
-			SkMacHardRst(pAC, IoC, Port);
-		}
-
-		/* Disable Force Sync bit and Enable Alloc bit */
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-			TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
-		/* Stop Interval Timer and Limit Counter of Tx Arbiter */
-		SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
-		SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
-
-		/* Perform a local reset of the port's Tx path */
-
-		/* Reset the PCI FIFO of the async Tx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the PCI FIFO of the sync Tx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the RAM Buffer async Tx queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
-		/* Reset the RAM Buffer sync Tx queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
-
-		/* Reset Tx MAC FIFO */
-		if (pAC->GIni.GIGenesis) {
-			/* Note: MFF_RST_SET does NOT reset the XMAC ! */
-			SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
-
-			/* switch Link and Tx LED off, stop the LED counters */
-			/* Link LED is switched off by the RLMT and the Diag itself */
-			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
-		}
-		else {
-			/* Reset TX MAC FIFO */
-			SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
-		}
-	}
-
-	if ((Dir & SK_STOP_RX) != 0) {
-		/*
-		 * The RX Stop Command will not terminate if no buffers
-		 * are queued in the RxD ring. But it will always reach
-		 * the Idle state. Therefore we can use this feature to
-		 * stop the transfer of received packets.
-		 */
-		/* stop the port's receive queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
-
-		i = 100;
-		do {
-			/*
-			 * Clear packet arbiter timeout to make sure
-			 * this loop will terminate
-			 */
-			SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_RX1 :
-				PA_CLR_TO_RX2);
-
-			DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
-
-			/* timeout if i==0 (bug fix for #10748) */
-			if (--i == 0) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
-					SKERR_HWI_E024MSG);
-				break;
-			}
-			/*
-			 * because of the ASIC problem report entry from 21.08.98
-			 * it is required to wait until CSR_STOP is reset and
-			 * CSR_SV_IDLE is set.
-			 */
-		} while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
-		/* The path data transfer activity is fully stopped now */
-
-		/* Perform a local reset of the port's Rx path */
-
-		 /*	Reset the PCI FIFO of the Rx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the RAM Buffer receive queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
-
-		/* Reset Rx MAC FIFO */
-		if (pAC->GIni.GIGenesis) {
-
-			SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
-
-			/* switch Rx LED off, stop the LED counter */
-			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
-		}
-		else {
-			/* Reset Rx MAC FIFO */
-			SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
-		}
-	}
-}	/* SkGeStopPort */
-
-
-/******************************************************************************
- *
- *	SkGeInit0() - Level 0 Initialization
- *
- * Description:
- *	- Initialize the BMU address offsets
- *
- * Returns:
- *	nothing
- */
-static void SkGeInit0(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	int i;
-	SK_GEPORT *pPrt;
-
-	for (i = 0; i < SK_MAX_MACS; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		pPrt->PState = SK_PRT_RESET;
-		pPrt->PRxQOff = QOffTab[i].RxQOff;
-		pPrt->PXsQOff = QOffTab[i].XsQOff;
-		pPrt->PXaQOff = QOffTab[i].XaQOff;
-		pPrt->PCheckPar = SK_FALSE;
-		pPrt->PIsave = 0;
-		pPrt->PPrevShorts = 0;
-		pPrt->PLinkResCt = 0;
-		pPrt->PAutoNegTOCt = 0;
-		pPrt->PPrevRx = 0;
-		pPrt->PPrevFcs = 0;
-		pPrt->PRxLim = SK_DEF_RX_WA_LIM;
-		pPrt->PLinkMode = SK_LMODE_AUTOFULL;
-		pPrt->PLinkSpeedCap = SK_LSPEED_CAP_1000MBPS;
-		pPrt->PLinkSpeed = SK_LSPEED_1000MBPS;
-		pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_UNKNOWN;
-		pPrt->PLinkModeConf = SK_LMODE_AUTOSENSE;
-		pPrt->PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
-		pPrt->PLinkBroken = SK_TRUE; /* See WA code */
-		pPrt->PLinkCap = (SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
-				SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
-		pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
-		pPrt->PFlowCtrlCap = SK_FLOW_MODE_SYM_OR_REM;
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-		pPrt->PMSCap = 0;
-		pPrt->PMSMode = SK_MS_MODE_AUTO;
-		pPrt->PMSStatus = SK_MS_STAT_UNSET;
-		pPrt->PAutoNegFail = SK_FALSE;
-		pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-		pPrt->PHWLinkUp = SK_FALSE;
-	}
-
-	pAC->GIni.GIPortUsage = SK_RED_LINK;
-
-}	/* SkGeInit0*/
-
-#ifdef SK_PCI_RESET
-
-/******************************************************************************
- *
- *	SkGePciReset() - Reset PCI interface
- *
- * Description:
- *	o Read PCI configuration.
- *	o Change power state to 3.
- *	o Change power state to 0.
- *	o Restore PCI configuration.
- *
- * Returns:
- *	0:	Success.
- *	1:	Power state could not be changed to 3.
- */
-static int SkGePciReset(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	int		i;
-	SK_U16	PmCtlSts;
-	SK_U32	Bp1;
-	SK_U32	Bp2;
-	SK_U16	PciCmd;
-	SK_U8	Cls;
-	SK_U8	Lat;
-	SK_U8	ConfigSpace[PCI_CFG_SIZE];
-
-	/*
-	 * Note: Switching to D3 state is like a software reset.
-	 *		 Switching from D3 to D0 is a hardware reset.
-	 *		 We have to save and restore the configuration space.
-	 */
-	for (i = 0; i < PCI_CFG_SIZE; i++) {
-		SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
-	}
-
-	/* We know the RAM Interface Arbiter is enabled. */
-	SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
-	SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
-	if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
-		return(1);
-	}
-
-	/* Return to D0 state. */
-	SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
-
-	/* Check for D0 state. */
-	SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
-	if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
-		return(1);
-	}
-
-	/* Check PCI Config Registers. */
-	SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
-	SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
-	SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
-	SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
-	SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
-
-	if (PciCmd != 0 || Cls != 0 || (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1 ||
-		Lat != 0) {
-		return(1);
-	}
-
-	/* Restore PCI Config Space. */
-	for (i = 0; i < PCI_CFG_SIZE; i++) {
-		SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
-	}
-
-	return(0);
-}	/* SkGePciReset */
-
-#endif /* SK_PCI_RESET */
-
-/******************************************************************************
- *
- *	SkGeInit1() - Level 1 Initialization
- *
- * Description:
- *	o Do a software reset.
- *	o Clear all reset bits.
- *	o Verify that the detected hardware is present.
- *	  Return an error if not.
- *	o Get the hardware configuration
- *		+ Read the number of MACs/Ports.
- *		+ Read the RAM size.
- *		+ Read the PCI Revision Id.
- *		+ Find out the adapters host clock speed
- *		+ Read and check the PHY type
- *
- * Returns:
- *	0:	success
- *	5:	Unexpected PHY type detected
- *	6:	HW self test failed
- */
-static int SkGeInit1(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	SK_U8	Byte;
-	SK_U16	Word;
-	SK_U16	CtrlStat;
-	SK_U32	FlashAddr;
-	int	RetVal;
-	int	i;
-
-	RetVal = 0;
-
-	/* save CLK_RUN bits (YUKON-Lite) */
-	SK_IN16(IoC, B0_CTST, &CtrlStat);
-
-#ifdef SK_PCI_RESET
-	(void)SkGePciReset(pAC, IoC);
-#endif /* SK_PCI_RESET */
-
-	/* do the SW-reset */
-	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-
-	/* release the SW-reset */
-	SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
-
-	/* reset all error bits in the PCI STATUS register */
-	/*
-	 * Note: PCI Cfg cycles cannot be used, because they are not
-	 *		 available on some platforms after 'boot time'.
-	 */
-	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-	/* release Master Reset */
-	SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
-
-#ifdef CLK_RUN
-	CtrlStat |= CS_CLK_RUN_ENA;
-#endif /* CLK_RUN */
-
-	/* restore CLK_RUN bits */
-	SK_OUT16(IoC, B0_CTST, CtrlStat &
-		(CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA));
-
-	/* read Chip Identification Number */
-	SK_IN8(IoC, B2_CHIP_ID, &Byte);
-	pAC->GIni.GIChipId = Byte;
-
-	/* read number of MACs */
-	SK_IN8(IoC, B2_MAC_CFG, &Byte);
-	pAC->GIni.GIMacsFound = (Byte & CONFIG_SYS_SNG_MAC) ? 1 : 2;
-
-	/* get Chip Revision Number */
-	pAC->GIni.GIChipRev = (SK_U8)((Byte & CONFIG_SYS_CHIP_R_MSK) >> 4);
-
-	/* get diff. PCI parameters */
-	SK_IN16(IoC, B0_CTST, &CtrlStat);
-
-	/* read the adapters RAM size */
-	SK_IN8(IoC, B2_E_0, &Byte);
-
-	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-
-		pAC->GIni.GIGenesis = SK_TRUE;
-
-		if (Byte == 3) {
-			/* special case: 4 x 64k x 36, offset = 0x80000 */
-			pAC->GIni.GIRamSize = 1024;
-			pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
-		}
-		else {
-			pAC->GIni.GIRamSize = (int)Byte * 512;
-			pAC->GIni.GIRamOffs = 0;
-		}
-		/* all GE adapters work with 53.125 MHz host clock */
-		pAC->GIni.GIHstClkFact = SK_FACT_53;
-
-		/* set Descr. Poll Timer Init Value to 250 ms */
-		pAC->GIni.GIPollTimerVal =
-			SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-	}
-	else {
-		pAC->GIni.GIGenesis = SK_FALSE;
-
-#ifndef VCPU
-		pAC->GIni.GIRamSize = (Byte == 0) ? 128 : (int)Byte * 4;
-#else
-		pAC->GIni.GIRamSize = 128;
-#endif
-		pAC->GIni.GIRamOffs = 0;
-
-		/* WA for chip Rev. A */
-		pAC->GIni.GIWolOffs = (pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
-
-		/* get PM Capabilities of PCI config space */
-		SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
-
-		/* check if VAUX is available */
-		if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
-			/* check also if PME from D3cold is set */
-			((Word & PCI_PME_D3C_SUP) != 0)) {
-			/* set entry in GE init struct */
-			pAC->GIni.GIVauxAvail = SK_TRUE;
-		}
-
-		/* save Flash-Address Register */
-		SK_IN32(IoC, B2_FAR, &FlashAddr);
-
-		/* test Flash-Address Register */
-		SK_OUT8(IoC, B2_FAR + 3, 0xff);
-		SK_IN8(IoC, B2_FAR + 3, &Byte);
-
-		pAC->GIni.GIYukonLite = (SK_BOOL)(Byte != 0);
-
-		/* restore Flash-Address Register */
-		SK_OUT32(IoC, B2_FAR, FlashAddr);
-
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-			/* set GMAC Link Control reset */
-			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
-
-			/* clear GMAC Link Control reset */
-			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
-		}
-		/* all YU chips work with 78.125 MHz host clock */
-		pAC->GIni.GIHstClkFact = SK_FACT_78;
-
-		pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;	/* 215 ms */
-	}
-
-	/* check if 64-bit PCI Slot is present */
-	pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
-
-	/* check if 66 MHz PCI Clock is active */
-	pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
-
-	/* read PCI HW Revision Id. */
-	SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
-	pAC->GIni.GIPciHwRev = Byte;
-
-	/* read the PMD type */
-	SK_IN8(IoC, B2_PMD_TYP, &Byte);
-	pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
-
-	/* read the PHY type */
-	SK_IN8(IoC, B2_E_1, &Byte);
-
-	Byte &= 0x0f;	/* the PHY type is stored in the lower nibble */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-		if (pAC->GIni.GIGenesis) {
-			switch (Byte) {
-			case SK_PHY_XMAC:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
-				break;
-			case SK_PHY_BCOM:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
-				pAC->GIni.GP[i].PMSCap =
-					SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
-				break;
-#ifdef OTHER_PHY
-			case SK_PHY_LONE:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
-				break;
-			case SK_PHY_NAT:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
-				break;
-#endif /* OTHER_PHY */
-			default:
-				/* ERROR: unexpected PHY type detected */
-				RetVal = 5;
-				break;
-			}
-		}
-		else {
-			if (Byte == 0) {
-				/* if this field is not initialized */
-				Byte = SK_PHY_MARV_COPPER;
-				pAC->GIni.GICopperType = SK_TRUE;
-			}
-			pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
-
-			if (pAC->GIni.GICopperType) {
-				pAC->GIni.GP[i].PLinkSpeedCap = SK_LSPEED_CAP_AUTO |
-					SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
-					SK_LSPEED_CAP_1000MBPS;
-				pAC->GIni.GP[i].PLinkSpeed = SK_LSPEED_AUTO;
-				pAC->GIni.GP[i].PMSCap =
-					SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
-			}
-			else {
-				Byte = SK_PHY_MARV_FIBER;
-			}
-		}
-
-		pAC->GIni.GP[i].PhyType = Byte;
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("PHY type: %d  PHY addr: %04x\n", Byte,
-			pAC->GIni.GP[i].PhyAddr));
-	}
-
-	/* get Mac Type & set function pointers dependent on */
-	if (pAC->GIni.GIGenesis) {
-		pAC->GIni.GIMacType = SK_MAC_XMAC;
-
-		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkXmUpdateStats;
-		pAC->GIni.GIFunc.pFnMacStatistic	= SkXmMacStatistic;
-		pAC->GIni.GIFunc.pFnMacResetCounter	= SkXmResetCounter;
-		pAC->GIni.GIFunc.pFnMacOverflow		= SkXmOverflowStatus;
-	}
-	else {
-		pAC->GIni.GIMacType = SK_MAC_GMAC;
-
-		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkGmUpdateStats;
-		pAC->GIni.GIFunc.pFnMacStatistic	= SkGmMacStatistic;
-		pAC->GIni.GIFunc.pFnMacResetCounter	= SkGmResetCounter;
-		pAC->GIni.GIFunc.pFnMacOverflow		= SkGmOverflowStatus;
-
-#ifdef SPECIAL_HANDLING
-		if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-			/* check HW self test result */
-			SK_IN8(IoC, B2_E_3, &Byte);
-			if ((Byte & B2_E3_RES_MASK) != 0) {
-				RetVal = 6;
-			}
-		}
-#endif
-	}
-	return(RetVal);
-}	/* SkGeInit1 */
-
-
-/******************************************************************************
- *
- *	SkGeInit2() - Level 2 Initialization
- *
- * Description:
- *	- start the Blink Source Counter
- *	- start the Descriptor Poll Timer
- *	- configure the MAC-Arbiter
- *	- configure the Packet-Arbiter
- *	- enable the Tx Arbiters
- *	- enable the RAM Interface Arbiter
- *
- * Returns:
- *	nothing
- */
-static void SkGeInit2(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	SK_U32	DWord;
-	int		i;
-
-	/* start the Descriptor Poll Timer */
-	if (pAC->GIni.GIPollTimerVal != 0) {
-		if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
-			pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
-		}
-		SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
-		SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
-	}
-
-	if (pAC->GIni.GIGenesis) {
-		/* start the Blink Source Counter */
-		DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-
-		SK_OUT32(IoC, B2_BSC_INI, DWord);
-		SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
-
-		/*
-		 * Configure the MAC Arbiter and the Packet Arbiter.
-		 * They will be started once and never be stopped.
-		 */
-		SkGeInitMacArb(pAC, IoC);
-
-		SkGeInitPktArb(pAC, IoC);
-	}
-	else {
-		/* start Time Stamp Timer */
-		SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
-	}
-
-	/* enable the Tx Arbiters */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
-	}
-
-	/* enable the RAM Interface Arbiter */
-	SkGeInitRamIface(pAC, IoC);
-
-}	/* SkGeInit2 */
-
-/******************************************************************************
- *
- *	SkGeInit() - Initialize the GE Adapter with the specified level.
- *
- * Description:
- *	Level	0:	Initialize the Module structures.
- *	Level	1:	Generic Hardware Initialization. The IOP/MemBase pointer has
- *				to be set before calling this level.
- *
- *			o Do a software reset.
- *			o Clear all reset bits.
- *			o Verify that the detected hardware is present.
- *			  Return an error if not.
- *			o Get the hardware configuration
- *				+ Set GIMacsFound with the number of MACs.
- *				+ Store the RAM size in GIRamSize.
- *				+ Save the PCI Revision ID in GIPciHwRev.
- *			o return an error
- *				if Number of MACs > SK_MAX_MACS
- *
- *			After returning from Level 0 the adapter
- *			may be accessed with IO operations.
- *
- *	Level	2:	start the Blink Source Counter
- *
- * Returns:
- *	0:	success
- *	1:	Number of MACs exceeds SK_MAX_MACS	(after level 1)
- *	2:	Adapter not present or not accessible
- *	3:	Illegal initialization level
- *	4:	Initialization Level 1 Call missing
- *	5:	Unexpected PHY type detected
- *	6:	HW self test failed
- */
-int	SkGeInit(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Level)		/* initialization level */
-{
-	int		RetVal;		/* return value */
-	SK_U32	DWord;
-
-	RetVal = 0;
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-		("SkGeInit(Level %d)\n", Level));
-
-	switch (Level) {
-	case SK_INIT_DATA:
-		/* Initialization Level 0 */
-		SkGeInit0(pAC, IoC);
-		pAC->GIni.GILevel = SK_INIT_DATA;
-		break;
-
-	case SK_INIT_IO:
-		/* Initialization Level 1 */
-		RetVal = SkGeInit1(pAC, IoC);
-		if (RetVal != 0) {
-			break;
-		}
-
-		/* check if the adapter seems to be accessible */
-		SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L);
-		SK_IN32(IoC, B2_IRQM_INI, &DWord);
-		SK_OUT32(IoC, B2_IRQM_INI, 0L);
-
-		if (DWord != 0x11335577L) {
-			RetVal = 2;
-			break;
-		}
-
-		/* check if the number of GIMacsFound matches SK_MAX_MACS */
-		if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
-			RetVal = 1;
-			break;
-		}
-
-		/* Level 1 successfully passed */
-		pAC->GIni.GILevel = SK_INIT_IO;
-		break;
-
-	case SK_INIT_RUN:
-		/* Initialization Level 2 */
-		if (pAC->GIni.GILevel != SK_INIT_IO) {
-#ifndef SK_DIAG
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
-#endif /* !SK_DIAG */
-			RetVal = 4;
-			break;
-		}
-		SkGeInit2(pAC, IoC);
-
-		/* Level 2 successfully passed */
-		pAC->GIni.GILevel = SK_INIT_RUN;
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
-		RetVal = 3;
-		break;
-	}
-
-	return(RetVal);
-}	/* SkGeInit */
-
-
-/******************************************************************************
- *
- *	SkGeDeInit() - Deinitialize the adapter
- *
- * Description:
- *	All ports of the adapter will be stopped if not already done.
- *	Do a software reset and switch off all LEDs.
- *
- * Returns:
- *	nothing
- */
-void SkGeDeInit(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	int	i;
-	SK_U16	Word;
-
-#ifndef VCPU
-	/* ensure I2C is ready */
-	SkI2cWaitIrq(pAC, IoC);
-#endif
-
-	/* stop all current transfer activity */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
-			pAC->GIni.GP[i].PState != SK_PRT_RESET) {
-
-			SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
-		}
-	}
-
-	/* Reset all bits in the PCI STATUS register */
-	/*
-	 * Note: PCI Cfg cycles cannot be used, because they are not
-	 *	 available on some platforms after 'boot time'.
-	 */
-	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-	/* do the reset, all LEDs are switched off now */
-	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-}	/* SkGeDeInit */
-
-
-/******************************************************************************
- *
- *	SkGeInitPort()	Initialize the specified port.
- *
- * Description:
- *	PRxQSize, PXSQSize, and PXAQSize has to be
- *	configured for the specified port before calling this function.
- *  The descriptor rings has to be initialized too.
- *
- *	o (Re)configure queues of the specified port.
- *	o configure the MAC of the specified port.
- *	o put ASIC and MAC(s) in operational mode.
- *	o initialize Rx/Tx and Sync LED
- *	o initialize RAM Buffers and MAC FIFOs
- *
- *	The port is ready to connect when returning.
- *
- * Note:
- *	The MAC's Rx and Tx state machine is still disabled when returning.
- *
- * Returns:
- *	0:	success
- *	1:	Queue size initialization error. The configured values
- *		for PRxQSize, PXSQSize, or PXAQSize are invalid for one
- *		or more queues. The specified port was NOT initialized.
- *		An error log entry was generated.
- *	2:	The port has to be stopped before it can be initialized again.
- */
-int SkGeInitPort(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port to configure */
-{
-	SK_GEPORT *pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (SkGeCheckQSize(pAC, Port) != 0) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
-		return(1);
-	}
-
-	if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
-		return(2);
-	}
-
-	/* configuration ok, initialize the Port now */
-
-	if (pAC->GIni.GIGenesis) {
-		/* initialize Rx, Tx and Link LED */
-		/*
-		 * If 1000BT Phy needs LED initialization than swap
-		 * LED and XMAC initialization order
-		 */
-		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
-		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
-		/* The Link LED is initialized by RLMT or Diagnostics itself */
-
-		SkXmInitMac(pAC, IoC, Port);
-	}
-	else {
-
-		SkGmInitMac(pAC, IoC, Port);
-	}
-
-	/* do NOT initialize the Link Sync Counter */
-
-	SkGeInitMacFifo(pAC, IoC, Port);
-
-	SkGeInitRamBufs(pAC, IoC, Port);
-
-	if (pPrt->PXSQSize != 0) {
-		/* enable Force Sync bit if synchronous queue available */
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
-	}
-
-	SkGeInitBmu(pAC, IoC, Port);
-
-	/* mark port as initialized */
-	pPrt->PState = SK_PRT_INIT;
-
-	return(0);
-}	/* SkGeInitPort */