diff options
| author | Vignesh R <vigneshr@ti.com> | 2016-07-06 10:20:56 +0530 |
|---|---|---|
| committer | Jagan Teki <jteki@openedev.com> | 2016-07-09 20:16:33 +0530 |
| commit | 2372e14f1937fceea54d698342e5a4240b58a893 (patch) | |
| tree | ff5362dd329b3f2e970bc77368641fd9a9f49fde /drivers/spi/cadence_qspi_apb.c | |
| parent | dac3bf20fb2c9b03476be0d73db620f62ab3cee1 (diff) | |
| download | u-boot-2372e14f1937fceea54d698342e5a4240b58a893.tar.gz | |
spi: cadence_quadspi: Enable QUAD mode based on DT data
Instead of relying on CONFIG_SPI_FLASH_QUAD to be defined to enable QUAD
mode, make use of mode_rx field of dm_spi_slave_platdata to determine
whether to enable or disable QUAD mode. This is necessary to support
muliple SPI controllers where one of them may not support QUAD mode.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Diffstat (limited to 'drivers/spi/cadence_qspi_apb.c')
| -rw-r--r-- | drivers/spi/cadence_qspi_apb.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index a8cc23f0b6..1a35d558a6 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -29,6 +29,7 @@ #include <asm/io.h> #include <asm/errno.h> #include <wait_bit.h> +#include <spi.h> #include "cadence_qspi.h" #define CQSPI_REG_POLL_US (1) /* 1us */ @@ -548,7 +549,7 @@ int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen, /* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, - unsigned int cmdlen, const u8 *cmdbuf) + unsigned int cmdlen, unsigned int rx_width, const u8 *cmdbuf) { unsigned int reg; unsigned int rd_reg; @@ -578,10 +579,9 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, /* Configure the opcode */ rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB; -#if (CONFIG_SPI_FLASH_QUAD == 1) - /* Instruction and address at DQ0, data at DQ0-3. */ - rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; -#endif + if (rx_width & SPI_RX_QUAD) + /* Instruction and address at DQ0, data at DQ0-3. */ + rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; /* Get address */ addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes); |