serial: Update NS16550_t and struct NS16550

Typedefs should not be used in U-Boot and structs should be lower case.
Update the code to use struct ns16550 consistently.

Put a header guard on the file while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

6 files changed, 36 insertions, 36 deletions

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8dd81ad794..d529b1b807 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -156,7 +156,7 @@ static inline int serial_in_dynamic(struct ns16550_plat *plat, u8 *addr)
 
 #endif /* CONFIG_NS16550_DYNAMIC */
 
-static void ns16550_writeb(NS16550_t port, int offset, int value)
+static void ns16550_writeb(struct ns16550 *port, int offset, int value)
 {
 	struct ns16550_plat *plat = port->plat;
 	unsigned char *addr;
@@ -170,7 +170,7 @@ static void ns16550_writeb(NS16550_t port, int offset, int value)
 		serial_out_shift(addr, plat->reg_shift, value);
 }
 
-static int ns16550_readb(NS16550_t port, int offset)
+static int ns16550_readb(struct ns16550 *port, int offset)
 {
 	struct ns16550_plat *plat = port->plat;
 	unsigned char *addr;
@@ -184,7 +184,7 @@ static int ns16550_readb(NS16550_t port, int offset)
 		return serial_in_shift(addr, plat->reg_shift);
 }
 
-static u32 ns16550_getfcr(NS16550_t port)
+static u32 ns16550_getfcr(struct ns16550 *port)
 {
 	struct ns16550_plat *plat = port->plat;
 
@@ -199,20 +199,20 @@ static u32 ns16550_getfcr(NS16550_t port)
 	ns16550_readb(com_port, \
 		(unsigned char *)addr - (unsigned char *)com_port)
 #else
-static u32 ns16550_getfcr(NS16550_t port)
+static u32 ns16550_getfcr(struct ns16550 *port)
 {
 	return UART_FCR_DEFVAL;
 }
 #endif
 
-int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
+int ns16550_calc_divisor(struct ns16550 *port, int clock, int baudrate)
 {
 	const unsigned int mode_x_div = 16;
 
 	return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
 }
 
-static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
+static void NS16550_setbrg(struct ns16550 *com_port, int baud_divisor)
 {
 	/* to keep serial format, read lcr before writing BKSE */
 	int lcr_val = serial_in(&com_port->lcr) & ~UART_LCR_BKSE;
@@ -223,7 +223,7 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
 	serial_out(lcr_val, &com_port->lcr);
 }
 
-void NS16550_init(NS16550_t com_port, int baud_divisor)
+void NS16550_init(struct ns16550 *com_port, int baud_divisor)
 {
 #if (defined(CONFIG_SPL_BUILD) && \
 		(defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
@@ -272,7 +272,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-void NS16550_reinit(NS16550_t com_port, int baud_divisor)
+void NS16550_reinit(struct ns16550 *com_port, int baud_divisor)
 {
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 	NS16550_setbrg(com_port, 0);
@@ -282,7 +282,7 @@ void NS16550_reinit(NS16550_t com_port, int baud_divisor)
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
-void NS16550_putc(NS16550_t com_port, char c)
+void NS16550_putc(struct ns16550 *com_port, char c)
 {
 	while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
 		;
@@ -299,7 +299,7 @@ void NS16550_putc(NS16550_t com_port, char c)
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-char NS16550_getc(NS16550_t com_port)
+char NS16550_getc(struct ns16550 *com_port)
 {
 	while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY)
@@ -311,7 +311,7 @@ char NS16550_getc(NS16550_t com_port)
 	return serial_in(&com_port->rbr);
 }
 
-int NS16550_tstc(NS16550_t com_port)
+int NS16550_tstc(struct ns16550 *com_port)
 {
 	return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
 }
@@ -324,7 +324,7 @@ int NS16550_tstc(NS16550_t com_port)
 
 static inline void _debug_uart_init(void)
 {
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
 	int baud_divisor;
 
 	/*
@@ -345,7 +345,7 @@ static inline void _debug_uart_init(void)
 	serial_dout(&com_port->lcr, UART_LCRVAL);
 }
 
-static inline int NS16550_read_baud_divisor(struct NS16550 *com_port)
+static inline int NS16550_read_baud_divisor(struct ns16550 *com_port)
 {
 	int ret;
 
@@ -359,7 +359,7 @@ static inline int NS16550_read_baud_divisor(struct NS16550 *com_port)
 
 static inline void _debug_uart_putc(int ch)
 {
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
 
 	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) {
 #ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED
@@ -377,7 +377,7 @@ DEBUG_UART_FUNCS
 #if CONFIG_IS_ENABLED(DM_SERIAL)
 static int ns16550_serial_putc(struct udevice *dev, const char ch)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 
 	if (!(serial_in(&com_port->lsr) & UART_LSR_THRE))
 		return -EAGAIN;
@@ -397,7 +397,7 @@ static int ns16550_serial_putc(struct udevice *dev, const char ch)
 
 static int ns16550_serial_pending(struct udevice *dev, bool input)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 
 	if (input)
 		return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0;
@@ -407,7 +407,7 @@ static int ns16550_serial_pending(struct udevice *dev, bool input)
 
 static int ns16550_serial_getc(struct udevice *dev)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 
 	if (!(serial_in(&com_port->lsr) & UART_LSR_DR))
 		return -EAGAIN;
@@ -417,7 +417,7 @@ static int ns16550_serial_getc(struct udevice *dev)
 
 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 	struct ns16550_plat *plat = com_port->plat;
 	int clock_divisor;
 
@@ -430,7 +430,7 @@ static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
 
 static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 	int lcr_val = UART_LCR_WLS_8;
 	uint parity = SERIAL_GET_PARITY(serial_config);
 	uint bits = SERIAL_GET_BITS(serial_config);
@@ -464,7 +464,7 @@ static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config)
 static int ns16550_serial_getinfo(struct udevice *dev,
 				  struct serial_device_info *info)
 {
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 	struct ns16550_plat *plat = com_port->plat;
 
 	info->type = SERIAL_CHIP_16550_COMPATIBLE;
@@ -499,7 +499,7 @@ static int ns16550_serial_assign_base(struct ns16550_plat *plat, ulong base)
 int ns16550_serial_probe(struct udevice *dev)
 {
 	struct ns16550_plat *plat = dev->plat;
-	struct NS16550 *const com_port = dev_get_priv(dev);
+	struct ns16550 *const com_port = dev_get_priv(dev);
 	struct reset_ctl_bulk reset_bulk;
 	fdt_addr_t addr;
 	int ret;
@@ -613,7 +613,7 @@ U_BOOT_DRIVER(ns16550_serial) = {
 	.of_to_plat = ns16550_serial_of_to_plat,
 	.plat_auto	= sizeof(struct ns16550_plat),
 #endif
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.probe = ns16550_serial_probe,
 	.ops	= &ns16550_serial_ops,
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
diff --git a/drivers/serial/serial_coreboot.c b/drivers/serial/serial_coreboot.c
index 904e1b306e..88c8209c5d 100644
--- a/drivers/serial/serial_coreboot.c
+++ b/drivers/serial/serial_coreboot.c
@@ -37,7 +37,7 @@ U_BOOT_DRIVER(coreboot_uart) = {
 	.name	= "coreboot_uart",
 	.id	= UCLASS_SERIAL,
 	.of_match	= coreboot_serial_ids,
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.plat_auto	= sizeof(struct ns16550_plat),
 	.of_to_plat  = coreboot_of_to_plat,
 	.probe	= ns16550_serial_probe,
diff --git a/drivers/serial/serial_intel_mid.c b/drivers/serial/serial_intel_mid.c
index be9bf662fd..bbf19057c4 100644
--- a/drivers/serial/serial_intel_mid.c
+++ b/drivers/serial/serial_intel_mid.c
@@ -61,7 +61,7 @@ U_BOOT_DRIVER(serial_intel_mid) = {
 	.of_match = mid_serial_ids,
 	.of_to_plat = ns16550_serial_of_to_plat,
 	.plat_auto	= sizeof(struct ns16550_plat),
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.probe	= mid_serial_probe,
 	.ops	= &ns16550_serial_ops,
 };
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index ef394b7235..a8d3602e9b 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -36,34 +36,34 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Note: The port number specified in the functions is 1 based.
  *	 the array is 0 based.
  */
-static NS16550_t serial_ports[6] = {
+static struct ns16550 *serial_ports[6] = {
 #ifdef CONFIG_SYS_NS16550_COM1
-	(NS16550_t)CONFIG_SYS_NS16550_COM1,
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM1,
 #else
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM2
-	(NS16550_t)CONFIG_SYS_NS16550_COM2,
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM2,
 #else
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM3
-	(NS16550_t)CONFIG_SYS_NS16550_COM3,
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM3,
 #else
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM4
-	(NS16550_t)CONFIG_SYS_NS16550_COM4,
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM4,
 #else
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM5
-	(NS16550_t)CONFIG_SYS_NS16550_COM5,
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM5,
 #else
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM6
-	(NS16550_t)CONFIG_SYS_NS16550_COM6
+	(struct ns16550 *)CONFIG_SYS_NS16550_COM6
 #else
 	NULL
 #endif
diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c
index 2f38e1b890..c235215541 100644
--- a/drivers/serial/serial_omap.c
+++ b/drivers/serial/serial_omap.c
@@ -66,7 +66,7 @@ static inline int serial_in_shift(void *addr, int shift)
 
 static inline void _debug_uart_init(void)
 {
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
 	int baud_divisor;
 
 	baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
@@ -85,7 +85,7 @@ static inline void _debug_uart_init(void)
 
 static inline void _debug_uart_putc(int ch)
 {
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
 
 	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
 		;
@@ -160,7 +160,7 @@ U_BOOT_DRIVER(omap_serial) = {
 	.of_to_plat = omap_serial_of_to_plat,
 	.plat_auto	= sizeof(struct ns16550_plat),
 #endif
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.probe = ns16550_serial_probe,
 	.ops	= &ns16550_serial_ops,
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
index 4c0548ed0f..036c07262b 100644
--- a/drivers/serial/serial_rockchip.c
+++ b/drivers/serial/serial_rockchip.c
@@ -42,7 +42,7 @@ static int rockchip_serial_probe(struct udevice *dev)
 U_BOOT_DRIVER(rockchip_rk3188_uart) = {
 	.name	= "rockchip_rk3188_uart",
 	.id	= UCLASS_SERIAL,
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.plat_auto	= sizeof(struct rockchip_uart_plat),
 	.probe	= rockchip_serial_probe,
 	.ops	= &ns16550_serial_ops,
@@ -52,7 +52,7 @@ U_BOOT_DRIVER(rockchip_rk3188_uart) = {
 U_BOOT_DRIVER(rockchip_rk3288_uart) = {
 	.name	= "rockchip_rk3288_uart",
 	.id	= UCLASS_SERIAL,
-	.priv_auto	= sizeof(struct NS16550),
+	.priv_auto	= sizeof(struct ns16550),
 	.plat_auto	= sizeof(struct rockchip_uart_plat),
 	.probe	= rockchip_serial_probe,
 	.ops	= &ns16550_serial_ops,