video: seps525: Add seps525 SPI driver

Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB
160x128 display. This driver has been tested through zynq-spi driver.

ZynqMP> load mmc 1 100000 rainbow.bmp
61562 bytes read in 20 ms (2.9 MiB/s)
ZynqMP> bmp info 100000
Image size    : 160 x 128
Bits per pixel: 24
Compression   : 0
ZynqMP> bmp display 100000
ZynqMP> setenv stdout vidconsole

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

3 files changed, 335 insertions, 0 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 998271b9b6..71363409f0 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -652,6 +652,13 @@ config VIDEO_NX
 	   HDMI. This option enables this support which can be used on devices
 	   which have an eDP display connected.
 
+config VIDEO_SEPS525
+	bool "Enable video support for Seps525"
+	depends on DM_VIDEO
+	help
+	  Enable support for the Syncoam PM-OLED display driver (RGB 160x128).
+	  Currently driver is supporting only SPI interface.
+
 source "drivers/video/nexell/Kconfig"
 
 config VIDEO
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 67a492a2d6..9db96aa891 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
 obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
 obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
 obj-$(CONFIG_VIDEO_VESA) += vesa.o
+obj-$(CONFIG_VIDEO_SEPS525) += seps525.o
 
 obj-y += bridge/
 obj-y += sunxi/
diff --git a/drivers/video/seps525.c b/drivers/video/seps525.c
new file mode 100644
index 0000000000..369e5e6afc
--- /dev/null
+++ b/drivers/video/seps525.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FB driver for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
+ * using the SEPS525 (Syncoam) LCD Controller
+ *
+ * Copyright (C) 2020 Xilinx Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <errno.h>
+#include <spi.h>
+#include <video.h>
+#include <asm/gpio.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+
+#define WIDTH		160
+#define HEIGHT		128
+
+#define SEPS525_INDEX			0x00
+#define SEPS525_STATUS_RD		0x01
+#define SEPS525_OSC_CTL			0x02
+#define SEPS525_IREF			0x80
+#define SEPS525_CLOCK_DIV		0x03
+#define SEPS525_REDUCE_CURRENT		0x04
+#define SEPS525_SOFT_RST		0x05
+#define SEPS525_DISP_ONOFF		0x06
+#define SEPS525_PRECHARGE_TIME_R	0x08
+#define SEPS525_PRECHARGE_TIME_G	0x09
+#define SEPS525_PRECHARGE_TIME_B	0x0A
+#define SEPS525_PRECHARGE_CURRENT_R	0x0B
+#define SEPS525_PRECHARGE_CURRENT_G	0x0C
+#define SEPS525_PRECHARGE_CURRENT_B	0x0D
+#define SEPS525_DRIVING_CURRENT_R	0x10
+#define SEPS525_DRIVING_CURRENT_G	0x11
+#define SEPS525_DRIVING_CURRENT_B	0x12
+#define SEPS525_DISPLAYMODE_SET		0x13
+#define SEPS525_RGBIF			0x14
+#define SEPS525_RGB_POL			0x15
+#define SEPS525_MEMORY_WRITEMODE	0x16
+#define SEPS525_MX1_ADDR		0x17
+#define SEPS525_MX2_ADDR		0x18
+#define SEPS525_MY1_ADDR		0x19
+#define SEPS525_MY2_ADDR		0x1A
+#define SEPS525_MEMORY_ACCESS_POINTER_X	0x20
+#define SEPS525_MEMORY_ACCESS_POINTER_Y	0x21
+#define SEPS525_DDRAM_DATA_ACCESS_PORT	0x22
+#define SEPS525_GRAY_SCALE_TABLE_INDEX	0x50
+#define SEPS525_GRAY_SCALE_TABLE_DATA	0x51
+#define SEPS525_DUTY			0x28
+#define SEPS525_DSL			0x29
+#define SEPS525_D1_DDRAM_FAC		0x2E
+#define SEPS525_D1_DDRAM_FAR		0x2F
+#define SEPS525_D2_DDRAM_SAC		0x31
+#define SEPS525_D2_DDRAM_SAR		0x32
+#define SEPS525_SCR1_FX1		0x33
+#define SEPS525_SCR1_FX2		0x34
+#define SEPS525_SCR1_FY1		0x35
+#define SEPS525_SCR1_FY2		0x36
+#define SEPS525_SCR2_SX1		0x37
+#define SEPS525_SCR2_SX2		0x38
+#define SEPS525_SCR2_SY1		0x39
+#define SEPS525_SCR2_SY2		0x3A
+#define SEPS525_SCREEN_SAVER_CONTEROL	0x3B
+#define SEPS525_SS_SLEEP_TIMER		0x3C
+#define SEPS525_SCREEN_SAVER_MODE	0x3D
+#define SEPS525_SS_SCR1_FU		0x3E
+#define SEPS525_SS_SCR1_MXY		0x3F
+#define SEPS525_SS_SCR2_FU		0x40
+#define SEPS525_SS_SCR2_MXY		0x41
+#define SEPS525_MOVING_DIRECTION	0x42
+#define SEPS525_SS_SCR2_SX1		0x47
+#define SEPS525_SS_SCR2_SX2		0x48
+#define SEPS525_SS_SCR2_SY1		0x49
+#define SEPS525_SS_SCR2_SY2		0x4A
+
+/* SEPS525_DISPLAYMODE_SET */
+#define MODE_SWAP_BGR	BIT(7)
+#define MODE_SM		BIT(6)
+#define MODE_RD		BIT(5)
+#define MODE_CD		BIT(4)
+
+/**
+ * struct seps525_priv - Private structure
+ * @reset_gpio: Reset gpio pin
+ * @dc_gpio: Data/command control gpio pin
+ * @dev: Device uclass for video_ops
+ */
+struct seps525_priv {
+	struct gpio_desc reset_gpio;
+	struct gpio_desc dc_gpio;
+	struct udevice *dev;
+};
+
+static int seps525_spi_write_cmd(struct udevice *dev, u32 reg)
+{
+	struct seps525_priv *priv = dev_get_priv(dev);
+	u8 buf8 = reg;
+	int ret;
+
+	ret = dm_gpio_set_value(&priv->dc_gpio, 0);
+	if (ret) {
+		dev_dbg(dev, "Failed to handle dc\n");
+		return ret;
+	}
+
+	ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
+	if (ret)
+		dev_dbg(dev, "Failed to write command\n");
+
+	return ret;
+}
+
+static int seps525_spi_write_data(struct udevice *dev, u32 val)
+{
+	struct seps525_priv *priv = dev_get_priv(dev);
+	u8 buf8 = val;
+	int ret;
+
+	ret = dm_gpio_set_value(&priv->dc_gpio, 1);
+	if (ret) {
+		dev_dbg(dev, "Failed to handle dc\n");
+		return ret;
+	}
+
+	ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
+	if (ret)
+		dev_dbg(dev, "Failed to write data\n");
+
+	return ret;
+}
+
+static void seps525_spi_write(struct udevice *dev, u32 reg, u32 val)
+{
+	(void)seps525_spi_write_cmd(dev, reg);
+	(void)seps525_spi_write_data(dev, val);
+}
+
+static int seps525_display_init(struct udevice *dev)
+{
+	/* Disable Oscillator Power Down */
+	seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x03);
+	mdelay(5);
+
+	/* Set Normal Driving Current */
+	seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x00);
+	mdelay(5);
+
+	seps525_spi_write(dev, SEPS525_SCREEN_SAVER_CONTEROL, 0x00);
+	/* Set EXPORT1 Pin at Internal Clock */
+	seps525_spi_write(dev, SEPS525_OSC_CTL, 0x01);
+	/* Set Clock as 120 Frames/Sec */
+	seps525_spi_write(dev, SEPS525_CLOCK_DIV, 0x90);
+	/* Set Reference Voltage Controlled by External Resister */
+	seps525_spi_write(dev, SEPS525_IREF, 0x01);
+
+	/* precharge time R G B */
+	seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_R, 0x04);
+	seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_G, 0x05);
+	seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_B, 0x05);
+
+	/* precharge current R G B (uA) */
+	seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_R, 0x9D);
+	seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_G, 0x8C);
+	seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_B, 0x57);
+
+	/* driving current R G B (uA) */
+	seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_R, 0x56);
+	seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_G, 0x4D);
+	seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_B, 0x46);
+	/* Set Color Sequence */
+	seps525_spi_write(dev, SEPS525_DISPLAYMODE_SET, 0x00);
+	/* Set MCU Interface Mode */
+	seps525_spi_write(dev, SEPS525_RGBIF, 0x01);
+	/* Set Memory Write Mode */
+	seps525_spi_write(dev, SEPS525_MEMORY_WRITEMODE, 0x66);
+	/* 1/128 Duty (0x0F~0x7F) */
+	seps525_spi_write(dev, SEPS525_DUTY, 0x7F);
+	/* Set Mapping RAM Display Start Line (0x00~0x7F) */
+	seps525_spi_write(dev, SEPS525_DSL, 0x00);
+	/* Display On (0x00/0x01) */
+	seps525_spi_write(dev, SEPS525_DISP_ONOFF, 0x01);
+	/* Set All Internal Register Value as Normal Mode */
+	seps525_spi_write(dev, SEPS525_SOFT_RST, 0x00);
+	/* Set RGB Interface Polarity as Active Low */
+	seps525_spi_write(dev, SEPS525_RGB_POL, 0x00);
+
+	/* Enable access for data */
+	(void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
+
+	return 0;
+}
+
+static int seps525_spi_startup(struct udevice *dev)
+{
+	struct seps525_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+	if (ret)
+		return ret;
+
+	ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+	if (ret)
+		return ret;
+
+	ret = dm_spi_claim_bus(dev);
+	if (ret) {
+		dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
+		return ret;
+	}
+
+	ret = seps525_display_init(dev);
+	if (ret)
+		return ret;
+
+	dm_spi_release_bus(dev);
+
+	return 0;
+}
+
+static int seps525_sync(struct udevice *vid)
+{
+	struct video_priv *uc_priv = dev_get_uclass_priv(vid);
+	struct seps525_priv *priv = dev_get_priv(vid);
+	struct udevice *dev = priv->dev;
+	int i, ret;
+	u8 data1, data2;
+	u8 *start = uc_priv->fb;
+
+	ret = dm_spi_claim_bus(dev);
+	if (ret) {
+		dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
+		return ret;
+	}
+
+	/* start position X,Y */
+	seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_X, 0);
+	seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_Y, 0);
+
+	/* Enable access for data */
+	(void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
+
+	for (i = 0; i < (uc_priv->xsize * uc_priv->ysize); i++) {
+		data2 = *start++;
+		data1 = *start++;
+		(void)seps525_spi_write_data(dev, data1);
+		(void)seps525_spi_write_data(dev, data2);
+	}
+
+	dm_spi_release_bus(dev);
+
+	return 0;
+}
+
+static int seps525_probe(struct udevice *dev)
+{
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct seps525_priv *priv = dev_get_priv(dev);
+	u32 buswidth;
+	int ret;
+
+	buswidth = dev_read_u32_default(dev, "buswidth", 0);
+	if (buswidth != 8) {
+		dev_err(dev, "Only 8bit buswidth is supported now");
+		return -EINVAL;
+	}
+
+	ret = gpio_request_by_name(dev, "reset-gpios", 0,
+				   &priv->reset_gpio, GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "missing reset GPIO\n");
+		return ret;
+	}
+
+	ret = gpio_request_by_name(dev, "dc-gpios", 0,
+				   &priv->dc_gpio, GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "missing dc GPIO\n");
+		return ret;
+	}
+
+	uc_priv->bpix = VIDEO_BPP16;
+	uc_priv->xsize = WIDTH;
+	uc_priv->ysize = HEIGHT;
+	uc_priv->rot = 0;
+
+	priv->dev = dev;
+
+	ret = seps525_spi_startup(dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int seps525_bind(struct udevice *dev)
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+	plat->size = WIDTH * HEIGHT * 16;
+
+	return 0;
+}
+
+static const struct video_ops seps525_ops = {
+	.video_sync = seps525_sync,
+};
+
+static const struct udevice_id seps525_ids[] = {
+	{ .compatible = "syncoam,seps525" },
+	{ }
+};
+
+U_BOOT_DRIVER(seps525_video) = {
+	.name = "seps525_video",
+	.id = UCLASS_VIDEO,
+	.of_match = seps525_ids,
+	.ops = &seps525_ops,
+	.platdata_auto_alloc_size = sizeof(struct video_uc_platdata),
+	.bind = seps525_bind,
+	.probe = seps525_probe,
+	.priv_auto_alloc_size = sizeof(struct seps525_priv),
+};