diff options
| author | Tom Rini <trini@konsulko.com> | 2019-11-18 20:02:10 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-11-20 18:32:09 -0500 |
| commit | a09fea1d28fe3c69a64bee092f5a764274d26ca2 (patch) | |
| tree | 93c09653555ff696eb7705a74475a711cea8b316 /include/configs/T102xRDB.h | |
| parent | 8160c38ca1fde4386db5a4ee07e86e397a4914df (diff) | |
| download | u-boot-a09fea1d28fe3c69a64bee092f5a764274d26ca2.tar.gz | |
env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.
Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Diffstat (limited to 'include/configs/T102xRDB.h')
| -rw-r--r-- | include/configs/T102xRDB.h | 29 |
1 files changed, 1 insertions, 28 deletions
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 8c1434fb10..88a6f0361a 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -137,33 +137,8 @@ #endif #if defined(CONFIG_SPIFLASH) -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#endif #elif defined(CONFIG_SDCARD) #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 0x800) -#elif defined(CONFIG_NAND) -#define CONFIG_ENV_SIZE 0x2000 -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) -#endif -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -#define CONFIG_ENV_ADDR 0xffe20000 -#define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_ENV_IS_NOWHERE) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif #ifndef __ASSEMBLY__ @@ -196,9 +171,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE (256 << 10) #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#endif +#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) |