arm: Remove bav335x board

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Cc: Gilles Gameiro <gilles@gigadevices.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 0 insertions, 475 deletions

diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
deleted file mode 100644
index c51b850f6d..0000000000
--- a/include/configs/bav335x.h
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * bav335x.h
- *
- * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __CONFIG_BAV335X_H
-#define __CONFIG_BAV335X_H
-
-#include <configs/ti_am335x_common.h>
-
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN		(16 << 20)
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_AM335XEVM
-
-/* Clock Defines */
-#define V_OSCK				24000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#ifdef CONFIG_MTD_RAW_NAND
-#define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${fdtaddr} u-boot-spl-os; " \
-		"nand read ${loadaddr} kernel; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0"
-#else
-#define NANDARGS ""
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-DEFAULT_LINUX_BOOT_ENV \
-"boot_fdt=try\0" \
-"bootpart=0:2\0" \
-"bootdir=\0" \
-"fdtdir=/dtbs\0" \
-"bootfile=zImage\0" \
-"fdtfile=undefined\0" \
-"console=ttyO0,115200n8\0" \
-"loadaddr=0x82000000\0" \
-"fdtaddr=0x88000000\0" \
-"rdaddr=0x88080000\0" \
-"initrd_high=0xffffffff\0" \
-"fdt_high=0xffffffff\0" \
-"partitions=" \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
-"optargs=\0" \
-"cmdline=\0" \
-"mmcdev=0\0" \
-"mmcpart=1\0" \
-"mmcroot=/dev/mmcblk0p2 ro\0" \
-"mmcrootfstype=ext4 rootwait fixrtc\0" \
-"rootpath=/export/rootfs\0" \
-"nfsopts=nolock\0" \
-"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
-"ramroot=/dev/ram0 rw\0" \
-"ramrootfstype=ext2\0" \
-"mmcargs=setenv bootargs console=${console} ${optargs} " \
-	"root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \
-"server_ip=192.168.1.100\0" \
-"gw_ip=192.168.1.1\0" \
-"netmask=255.255.255.0\0" \
-"hostname=\0" \
-"device=eth0\0" \
-"autoconf=off\0" \
-"root_dir=/home/userid/targetNFS\0" \
-"nfs_options=,vers=3\0" \
-"nfsrootfstype=ext4 rootwait fixrtc\0" \
-"nfsargs=setenv bootargs console=${console} ${optargs} " \
-	"root=/dev/nfs rw rootfstype=${nfsrootfstype} " \
-	"nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \
-"netargs=setenv bootargs console=${console} " \
-	"${optargs} root=/dev/nfs " \
-	"nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \
-"bootenv=uEnv.txt\0" \
-"script=boot.scr\0" \
-"scriptfile=${script}\0" \
-"loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \
-"bootscript=echo Running bootscript from mmc${bootpart} ...; " \
-	"source ${loadaddr}\0" \
-	"loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \
-"importbootenv=echo Importing environment from mmc ...; " \
-	"env import -t -r $loadaddr $filesize\0" \
-"ramargs=setenv bootargs console=${console} " \
-	"${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \
-"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadrd=load mmc ${bootpart} ${rdaddr} " \
-	"${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \
-"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \
-	"load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-"mmcboot=mmc dev ${mmcdev}; " \
-	"if mmc rescan; then " \
-		"gpio set 54;" \
-		"setenv bootpart ${mmcdev}:1; " \
-		"if test -e mmc ${bootpart} /etc/fstab; then " \
-			"setenv mmcpart 1;" \
-		"fi; " \
-		"echo Checking for: /uEnv.txt ...;" \
-		"if test -e mmc ${bootpart} /uEnv.txt; then " \
-			"if run loadbootenv; then " \
-				"gpio set 55;" \
-				"echo Loaded environment from ${bootenv};" \
-				"run importbootenv;" \
-			"fi;" \
-			"echo Checking if uenvcmd is set ...;" \
-			"if test -n ${uenvcmd}; then " \
-				"gpio set 56; " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-			"echo Checking if client_ip is set ...;" \
-			"if test -n ${client_ip}; then " \
-				"if test -n ${dtb}; then " \
-					"setenv fdtfile ${dtb};" \
-					"echo using ${fdtfile} ...;" \
-				"fi;" \
-				"gpio set 56; " \
-				"if test -n ${uname_r}; then " \
-					"echo Running nfsboot_uname_r ...;" \
-					"run nfsboot_uname_r;" \
-				"fi;" \
-				"echo Running nfsboot ...;" \
-				"run nfsboot;" \
-			"fi;" \
-		"fi; " \
-		"echo Checking for: /${script} ...;" \
-		"if test -e mmc ${bootpart} /${script}; then " \
-			"gpio set 55;" \
-			"setenv scriptfile ${script};" \
-			"run loadbootscript;" \
-			"echo Loaded script from ${scriptfile};" \
-			"gpio set 56; " \
-			"run bootscript;" \
-		"fi; " \
-		"echo Checking for: /boot/${script} ...;" \
-		"if test -e mmc ${bootpart} /boot/${script}; then " \
-			"gpio set 55;" \
-			"setenv scriptfile /boot/${script};" \
-			"run loadbootscript;" \
-			"echo Loaded script from ${scriptfile};" \
-			"gpio set 56; " \
-			"run bootscript;" \
-		"fi; " \
-		"echo Checking for: /boot/uEnv.txt ...;" \
-		"for i in 1 2 3 4 5 6 7 ; do " \
-			"setenv mmcpart ${i};" \
-			"setenv bootpart ${mmcdev}:${mmcpart};" \
-			"if test -e mmc ${bootpart} /boot/uEnv.txt; then " \
-				"gpio set 55;" \
-				"load mmc ${bootpart} ${loadaddr} " \
-						"/boot/uEnv.txt;" \
-				"env import -t ${loadaddr} ${filesize};" \
-				"echo Loaded environment from /boot/uEnv.txt;" \
-				"if test -n ${dtb}; then " \
-					"setenv fdtfile ${dtb};" \
-					"echo Using: dtb=${fdtfile} ...;" \
-				"fi;" \
-				"echo Checking if uname_r is set in " \
-						"/boot/uEnv.txt...;" \
-				"if test -n ${uname_r}; then " \
-					"gpio set 56; " \
-					"echo Running uname_boot ...;" \
-					"setenv mmcroot /dev/mmcblk${mmcdev}" \
-							"p${mmcpart} ro;" \
-					"run uname_boot;" \
-				"fi;" \
-			"fi;" \
-		"done;" \
-	"fi;\0" \
-"netboot=echo Booting from network ...; " \
-	"setenv autoload no; " \
-	"dhcp; " \
-	"tftp ${loadaddr} ${bootfile}; " \
-	"tftp ${fdtaddr} ${fdtfile}; " \
-	"run netargs; " \
-	"bootz ${loadaddr} - ${fdtaddr}\0" \
-"nfsboot=echo Booting from ${server_ip} ...; " \
-	"setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
-	"setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
-	":${device}:${autoconf}; " \
-	"setenv autoload no; " \
-	"setenv serverip ${server_ip}; " \
-	"setenv ipaddr ${client_ip}; " \
-	"tftp ${loadaddr} ${bootfile}; " \
-	"tftp ${fdtaddr} dtbs/${fdtfile}; " \
-	"run nfsargs; " \
-	"bootz ${loadaddr} - ${fdtaddr}\0" \
-"nfsboot_uname_r=echo Booting from ${server_ip} ...; " \
-	"setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
-	"setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
-			":${device}:${autoconf}; " \
-	"setenv autoload no; " \
-	"setenv serverip ${server_ip}; " \
-	"setenv ipaddr ${client_ip}; " \
-	"tftp ${loadaddr} vmlinuz-${uname_r}; " \
-	"tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \
-	"run nfsargs; " \
-	"bootz ${loadaddr} - ${fdtaddr}\0" \
-"ramboot=echo Booting from ramdisk ...; " \
-	"run ramargs; " \
-	"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-"findfdt="\
-	"if test $board_rev = B; then " \
-		"setenv fdtfile birdland_bav335b.dtb; " \
-		"setenv fdtbase am335x-boneblack; fi; " \
-	"if test $board_rev = A; then " \
-		"setenv fdtfile birdland_bav335a.dtb; " \
-		"setenv fdtbase am335x-boneblack; fi; " \
-	"if test $fdtfile = undefined; then " \
-		"echo WARNING: Could not determine device tree to use; fi; \0" \
-"uname_boot="\
-	"setenv bootdir /boot; " \
-	"setenv bootfile vmlinuz-${uname_r}; " \
-	"if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
-		"echo loading ${bootdir}/${bootfile} ...; "\
-		"run loadimage;" \
-		"setenv fdtdir /boot/dtbs/${uname_r}; " \
-		"if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \
-			"run loadfdt;" \
-		"else " \
-			"setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \
-			"if test -e mmc ${bootpart} ${fdtdir}/" \
-					"${fdtfile}; then " \
-				"run loadfdt;" \
-			"else " \
-				"setenv fdtdir /boot/dtb-${uname_r}; " \
-				"if test -e mmc ${bootpart} ${fdtdir}" \
-						"/${fdtfile}; then " \
-					"run loadfdt;" \
-				"else " \
-					"setenv fdtdir /boot/dtbs; " \
-					"if test -e mmc ${bootpart} ${fdtdir}" \
-							"/${fdtfile}; then " \
-						"run loadfdt;" \
-					"else " \
-						"echo; echo unable to find " \
-							"[${fdtfile}] " \
-						"did you name it correctly?" \
-						"echo booting fallback " \
-							"[/boot/dtbs/" \
-							"${uname_r}" \
-							"/${fdtbase}.dtb]...;" \
-						"setenv fdtdir /boot/dtbs/" \
-							"${uname_r}; " \
-						"setenv fdtfile " \
-							"${fdtbase}.dtb; " \
-						"run loadfdt;" \
-					"fi;" \
-				"fi;" \
-			"fi;" \
-		"fi;" \
-	"fi; " \
-	"setenv rdfile initrd.img-${uname_r}; " \
-	"if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \
-		"echo loading ${bootdir}/${rdfile} ...; "\
-		"run loadrd;" \
-		"if test -n ${uuid}; then " \
-			"setenv mmcroot UUID=${uuid} ro;" \
-		"fi;" \
-		"run mmcargs;" \
-		"echo debug: [${bootargs}] ... ;" \
-		"echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \
-					"${fdtaddr}] ... ;" \
-		"bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
-	"else " \
-		"run mmcargs;" \
-		"echo debug: [${bootargs}] ... ;" \
-		"echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
-		"bootz ${loadaddr} - ${fdtaddr}; " \
-	"fi;" \
-"fi;\0" \
-	NANDARGS \
-	DFUARGS
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-	"gpio set 53; " \
-	"i2c mw 0x24 1 0x3e; " \
-	"run findfdt; " \
-	"setenv mmcdev 0; " \
-	"setenv bootpart 0:1; " \
-	"run mmcboot;" \
-	"gpio clear 56; " \
-	"gpio clear 55; " \
-	"gpio clear 54; " \
-	"setenv mmcdev 1; " \
-	"setenv bootpart 1:1; " \
-	"run mmcboot;"
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
-#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
-#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
-#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
-#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
-
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-#define CONFIG_POWER_TPS65910
-
-/* SPL */
-#ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_BE
-
-/* USB gadget RNDIS */
-#endif
-
-#ifdef CONFIG_MTD_RAW_NAND
-/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-/* NAND: driver related configs */
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS	{ \
-	2, 3, 4, 5, 6, 7, 8, 9, \
-	10, 11, 12, 13, 14, 15, 16, 17, \
-	18, 19, 20, 21, 22, 23, 24, 25, \
-	26, 27, 28, 29, 30, 31, 32, 33, \
-	34, 35, 36, 37, 38, 39, 40, 41, \
-	42, 43, 44, 45, 46, 47, 48, 49, \
-	50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-/* NAND: SPL related configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
-#endif
-#endif /* !CONFIG_MTD_RAW_NAND */
-
-/*
- * For NOR boot, we must set this to the start of where NOR is mapped
- * in memory.
- */
-
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER)
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-#endif
-
-/* USB Device Firmware Update support */
-#ifndef CONFIG_SPL_BUILD
-#define DFU_ALT_INFO_MMC \
-	"dfu_alt_info_mmc=" \
-	"boot part 0 1;" \
-	"rootfs part 0 2;" \
-	"MLO fat 0 1;" \
-	"MLO.raw raw 0x100 0x100;" \
-	"u-boot.img.raw raw 0x300 0x400;" \
-	"spl-os-args.raw raw 0x80 0x80;" \
-	"spl-os-image.raw raw 0x900 0x2000;" \
-	"spl-os-args fat 0 1;" \
-	"spl-os-image fat 0 1;" \
-	"u-boot.img fat 0 1;" \
-	"uEnv.txt fat 0 1\0"
-#ifdef CONFIG_MTD_RAW_NAND
-#define DFU_ALT_INFO_NAND \
-	"dfu_alt_info_nand=" \
-	"SPL part 0 1;" \
-	"SPL.backup1 part 0 2;" \
-	"SPL.backup2 part 0 3;" \
-	"SPL.backup3 part 0 4;" \
-	"u-boot part 0 5;" \
-	"u-boot-spl-os part 0 6;" \
-	"kernel part 0 8;" \
-	"rootfs part 0 9\0"
-#else
-#define DFU_ALT_INFO_NAND ""
-#endif
-#define DFU_ALT_INFO_RAM \
-	"dfu_alt_info_ram=" \
-	"kernel ram 0x80200000 0xD80000;" \
-	"fdt ram 0x80F80000 0x80000;" \
-	"ramdisk ram 0x81000000 0x4000000\0"
-#define DFUARGS \
-	"dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
-	DFU_ALT_INFO_MMC \
-	DFU_ALT_INFO_RAM \
-	DFU_ALT_INFO_NAND
-#endif
-
-/*
- * Default to using SPI for environment, etc.
- * 0x000000 - 0x020000 : SPL (128KiB)
- * 0x020000 - 0x0A0000 : U-Boot (512KiB)
- * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
- * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
- * 0x0E0000 - 0x442000 : Linux Kernel
- * 0x442000 - 0x800000 : Userland
- */
-#if defined(CONFIG_SPI_BOOT)
-/* SPL related */
-#elif defined(CONFIG_EMMC_BOOT)
-#define CONFIG_SYS_MMC_ENV_DEV		1
-#define CONFIG_SYS_MMC_ENV_PART		2
-#endif
-
-/* SPI flash. */
-
-/* Network. */
-
-/*
- * NOR Size = 16 MiB
- * Number of Sectors/Blocks = 128
- * Sector Size = 128 KiB
- * Word length = 16 bits
- * Default layout:
- * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
- * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
- * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
- * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
- * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
- */
-#if defined(CONFIG_NOR)
-#define CONFIG_SYS_MAX_FLASH_SECT	128
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BASE		(0x08000000)
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_SIZE		0x01000000
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-/* Reduce SPL size by removing unlikey targets */
-#endif  /* NOR support */
-
-#endif	/* ! __CONFIG_AM335X_EVM_H */