diff options
| author | Tom Rini <trini@konsulko.com> | 2017-03-14 11:08:10 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-04-05 13:52:01 -0400 |
| commit | ea3310e8aafad1da72d9a5e60568d725cbdefdbd (patch) | |
| tree | 869faa824f09ce4d40f2ce503a607ceb28b5ce91 /include/configs/cm-bf527.h | |
| parent | c3b7cfe15ec1db047182d4ec55a3ce05f19bdf38 (diff) | |
| download | u-boot-ea3310e8aafad1da72d9a5e60568d725cbdefdbd.tar.gz | |
Blackfin: Remove
The architecture is currently unmaintained, remove.
Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/cm-bf527.h')
| -rw-r--r-- | include/configs/cm-bf527.h | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h deleted file mode 100644 index 3b6f9baa5d..0000000000 --- a/include/configs/cm-bf527.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * U-Boot - Configuration file for CM-BF527 board - */ - -#ifndef __CONFIG_CM_BF527_H__ -#define __CONFIG_CM_BF527_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf527-0.0 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 21 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 4 - -/* Decrease core voltage */ -#define CONFIG_VR_CTL_VAL (VLEV_120 | CLKBUFOE | FREQ_1000) - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 9 -#define CONFIG_MEM_SIZE 32 - -#define CONFIG_EBIU_SDRRC_VAL 0x3f8 -#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd - -#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) -#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) -#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) - -/* - * NAND Settings - * (can't be used sametime as ethernet) - */ -/* #define CONFIG_BFIN_NFC */ -#ifdef CONFIG_BFIN_NFC -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND -#endif - -/* - * Network Settings - */ -#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ - !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) -#define ADI_CMDS_NETWORK 1 -#define CONFIG_BFIN_MAC -#define CONFIG_RMII -#define CONFIG_NETCONSOLE 1 -#endif -#define CONFIG_HOSTNAME cm-bf527 - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 67 - -/* - * Env Storage Settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20008000 -#define CONFIG_ENV_OFFSET 0x8000 -#define CONFIG_ENV_SIZE 0x8000 -#define CONFIG_ENV_SECT_SIZE 0x8000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI - -/* - * Misc Settings - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_RTC_BFIN -#define CONFIG_UART_CONSOLE 0 -#define CONFIG_BOOTCOMMAND "run flashboot" -#define FLASHBOOT_ENV_SETTINGS \ - "flashboot=flread 20040000 1000000 300000;" \ - "bootm 0x1000000\0" - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |