Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged

Conflicts:
	README
	arch/arm/cpu/armv7/exynos/clock.c
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

1 files changed, 49 insertions, 19 deletions

diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index cc95e2be98..adeace0cf2 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -35,9 +35,13 @@
  * (easy to change)
  */
 #define CONFIG_SYS_COREBOOT
-#undef CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_SHOW_BOOT_PROGRESS
 #define CONFIG_LAST_STAGE_INIT
-
+#define CONFIG_X86_NO_RESET_VECTOR
+#define CONFIG_SYS_VSNPRINTF
+#define CONFIG_INTEL_CORE_ARCH	/* Sandy bridge and ivy bridge chipsets. */
+#define CONFIG_ZBOOT_32
+#define CONFIG_PHYSMEM
 
 /*-----------------------------------------------------------------------
  * Watchdog Configuration
@@ -67,11 +71,16 @@
 					 CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
+/* Generic TPM interfaced through LPC bus */
+#define CONFIG_GENERIC_LPC_TPM
+#define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000
+
 /*-----------------------------------------------------------------------
  * Real Time Clock Configuration
  */
 #define CONFIG_RTC_MC146818
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS	0
+#define CONFIG_SYS_ISA_IO      CONFIG_SYS_ISA_IO_BASE_ADDRESS
 
 /*-----------------------------------------------------------------------
  * Serial Configuration
@@ -88,18 +97,18 @@
 #define CONFIG_SYS_NS16550_COM2	UART1_BASE
 #define CONFIG_SYS_NS16550_PORT_MAPPED
 
-/* max. 1 IDE bus	*/
-#define CONFIG_SYS_IDE_MAXBUS		1
-/* max. 1 drive per IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS * 1)
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,eserial0\0" \
+					"stdout=vga,eserial0,cbmem\0" \
+					"stderr=vga,eserial0,cbmem\0"
 
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_ISA_IO_BASE_ADDRESS
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0170
-#define CONFIG_SYS_ATA_DATA_OFFSET	0
-#define CONFIG_SYS_ATA_REG_OFFSET	0
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x200
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_CBMEM_CONSOLE
 
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTOCOMPLETE
 
 #define CONFIG_SUPPORT_VFAT
 /************************************************************
@@ -110,19 +119,30 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
+#define CONFIG_EFI_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION		/* Experimental */
 
+#define CONFIG_CMD_PART
 #define CONFIG_CMD_CBFS
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_PARTITION_UUIDS
 
 /*-----------------------------------------------------------------------
  * Video Configuration
  */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_COREBOOT
+#define CONFIG_VIDEO_SW_CURSOR
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_I8042_KBD
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* x86 GPIOs are accessed through a PCI device */
+#define CONFIG_INTEL_ICH6_GPIO
 
 /*-----------------------------------------------------------------------
  * Command line configuration.
@@ -136,6 +156,7 @@
 #define CONFIG_CMD_ECHO
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_IRQ
@@ -153,12 +174,19 @@
 #define CONFIG_CMD_SETGETDCR
 #define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_XIMG
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_SCSI
+
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 
+#define CONFIG_CMD_ZBOOT
+
 #define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS		\
+	"root=/dev/sdb3 init=/sbin/init rootwait ro"
+#define CONFIG_BOOTCOMMAND	\
+	"ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
+
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE			115200
@@ -210,12 +238,11 @@
  * (128kB + Environment Sector Size) malloc pool
  */
 #define CONFIG_SYS_STACK_SIZE			(32 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR		(256 * 1024 + 16 * 1024)
+#define CONFIG_SYS_CAR_ADDR			0x19200000
+#define CONFIG_SYS_CAR_SIZE			(16 * 1024)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN			(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN			(0x20000 + 128 * 1024)
-/* Address of temporary Global Data */
-#define CONFIG_SYS_INIT_GD_ADDR		(256 * 1024)
 
 
 /* allow to overwrite serial and ethaddr */
@@ -240,4 +267,7 @@
  */
 #define CONFIG_PCI
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_STD_DEVICES_SETTINGS
+
 #endif	/* __CONFIG_H */