arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 136 deletions

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
deleted file mode 100644
index bc5e1ca697..0000000000
--- a/include/configs/davinci_schmoogie.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*=======*/
-/* Board */
-/*=======*/
-#define SCHMOOGIE
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_USE_NAND
-#define MACH_TYPE_SCHMOOGIE 1255
-#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
-
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
-#define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
-#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
-#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK	CONFIG_SYS_HZ_CLOCK	/* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10    /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS		2
-#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CONFIG_ENV_SIZE		(128 << 10)	/* 128 KiB */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE		0x02000000
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
-/*=====================*/
-/* Board related stuff */
-/*=====================*/
-#define CONFIG_RTC_DS1307		/* RTC chip on SCHMOOGIE */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x6f	/* RTC chip I2C address */
-#define CONFIG_UID_DS28CM00		/* Unique ID on SCHMOOGIE */
-#define CONFIG_SYS_UID_ADDR		0x50	/* UID chip I2C address */
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print buffer sz */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR	0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS		"mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND	"setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NAND
-#undef CONFIG_CMD_EEPROM
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */