Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 115 deletions

diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
deleted file mode 100644
index 4cd0f77146..0000000000
--- a/include/configs/ibf-dsp561.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * U-Boot - Configuration file for IBF-DSP561 board
- */
-
-#ifndef __CONFIG_IBF_DSP561__H__
-#define __CONFIG_IBF_DSP561__H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf561-0.5
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			24
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			5
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	9
-#define CONFIG_MEM_SIZE		64
-
-#define CONFIG_EBIU_SDRRC_VAL	0x377
-#define CONFIG_EBIU_SDGCTL_VAL	0x91998d
-#define CONFIG_EBIU_SDBCTL_VAL	0x15
-
-#define CONFIG_EBIU_AMGCTL_VAL	0x3F
-#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
-
-/*
- * Network Settings
- */
-#define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_AX88180	1
-#define AX88180_BASE		0x2c000000
-#define CONFIG_HOSTNAME		ibf-dsp561
-
-/*
- * Flash Settings
- */
-#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
-/* The BF561-EZKIT uses a top boot flash */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x12000	/* Total Size of Environment Sector */
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-	arch/blackfin/lib/built-in.o (.text*); \
-	arch/blackfin/cpu/built-in.o (.text*); \
-	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
-#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
-/*
- * Misc Settings
- */
-#define CONFIG_UART_CONSOLE	0
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif