summaryrefslogtreecommitdiff
path: root/include/configs/integratorap.h
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2012-01-30 13:49:34 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-02-27 21:19:24 +0100
commit2458716a5b2269cff89f4b41afac16ac84bf6fb2 (patch)
treeb4b55ca578f143cd9377544432ffb252bee8a8c9 /include/configs/integratorap.h
parent4ae6a91a86279c78c773f570057919dffecee484 (diff)
downloadu-boot-2458716a5b2269cff89f4b41afac16ac84bf6fb2.tar.gz
integrator: rewrite the AP PCI driver
The PCI support for the Integrator AP has apparently never been finished and I strongly suspect that it has never worked, so let's fix it. This is a list of the more or less un-splittable changes done in this driver rewrite: - Replace the register definitions stashed into the config file (!) with a copy if the register file from the Linux kernels arch/arm/include/asm/hardware/pci_v3.h - Delete the unreadable gigantic macros that perform the config accesses and replace them with copyedited code from Linux arch/arm/mach-integrator/pci_v3.c - Rewrite the rest of the setup code to use the v3_[read|write][lwb]() accessors. - Enable PCI by default in the AP board configuration. - Fix checkpatch warnings and make code more conformant. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/configs/integratorap.h')
-rw-r--r--include/configs/integratorap.h148
1 files changed, 6 insertions, 142 deletions
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index a1fdbb8140..0a704cb248 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -82,17 +82,7 @@
/*
* Command line configuration.
*/
-
-
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMLS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-
+#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty"
@@ -157,142 +147,16 @@
* PCI definitions
*/
-#ifdef CONFIG_PCI /* pci support */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
-#define DEBUG
+#define CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_NET_MULTI
+#define CONFIG_TULIP
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
-#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
-
-/* PCI Base area */
-#define INTEGRATOR_PCI_BASE 0x40000000
-#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
-
-/* memory map as seen by the CPU on the local bus */
-#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
-#define CPU_PCI_IO_SIZE 0x10000
-
-#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
-#define CPU_PCI_CNFG_SIZE 0x1000000
-
-#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
-/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
-#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
-/* unused (128-16)M from B1000000-B7FFFFFF */
-#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
-/* unused ((128-16)M - 64K) from XXX */
-
-#define PCI_V3_BASE 0x62000000
-
-/* V3 PCI bridge controller */
-#define V3_BASE 0x62000000 /* V360EPC registers */
-
-#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
-#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
-
-
-#define V3_PCI_VENDOR 0x00000000
-#define V3_PCI_DEVICE 0x00000002
-#define V3_PCI_CMD 0x00000004
-#define V3_PCI_STAT 0x00000006
-#define V3_PCI_CC_REV 0x00000008
-#define V3_PCI_HDR_CF 0x0000000C
-#define V3_PCI_IO_BASE 0x00000010
-#define V3_PCI_BASE0 0x00000014
-#define V3_PCI_BASE1 0x00000018
-#define V3_PCI_SUB_VENDOR 0x0000002C
-#define V3_PCI_SUB_ID 0x0000002E
-#define V3_PCI_ROM 0x00000030
-#define V3_PCI_BPARAM 0x0000003C
-#define V3_PCI_MAP0 0x00000040
-#define V3_PCI_MAP1 0x00000044
-#define V3_PCI_INT_STAT 0x00000048
-#define V3_PCI_INT_CFG 0x0000004C
-#define V3_LB_BASE0 0x00000054
-#define V3_LB_BASE1 0x00000058
-#define V3_LB_MAP0 0x0000005E
-#define V3_LB_MAP1 0x00000062
-#define V3_LB_BASE2 0x00000064
-#define V3_LB_MAP2 0x00000066
-#define V3_LB_SIZE 0x00000068
-#define V3_LB_IO_BASE 0x0000006E
-#define V3_FIFO_CFG 0x00000070
-#define V3_FIFO_PRIORITY 0x00000072
-#define V3_FIFO_STAT 0x00000074
-#define V3_LB_ISTAT 0x00000076
-#define V3_LB_IMASK 0x00000077
-#define V3_SYSTEM 0x00000078
-#define V3_LB_CFG 0x0000007A
-#define V3_PCI_CFG 0x0000007C
-#define V3_DMA_PCI_ADR0 0x00000080
-#define V3_DMA_PCI_ADR1 0x00000090
-#define V3_DMA_LOCAL_ADR0 0x00000084
-#define V3_DMA_LOCAL_ADR1 0x00000094
-#define V3_DMA_LENGTH0 0x00000088
-#define V3_DMA_LENGTH1 0x00000098
-#define V3_DMA_CSR0 0x0000008B
-#define V3_DMA_CSR1 0x0000009B
-#define V3_DMA_CTLB_ADR0 0x0000008C
-#define V3_DMA_CTLB_ADR1 0x0000009C
-#define V3_DMA_DELAY 0x000000E0
-#define V3_MAIL_DATA 0x000000C0
-#define V3_PCI_MAIL_IEWR 0x000000D0
-#define V3_PCI_MAIL_IERD 0x000000D2
-#define V3_LB_MAIL_IEWR 0x000000D4
-#define V3_LB_MAIL_IERD 0x000000D6
-#define V3_MAIL_WR_STAT 0x000000D8
-#define V3_MAIL_RD_STAT 0x000000DA
-#define V3_QBA_MAP 0x000000DC
-
-/* SYSTEM register bits */
-#define V3_SYSTEM_M_RST_OUT (1 << 15)
-#define V3_SYSTEM_M_LOCK (1 << 14)
-
-/* PCI_CFG bits */
-#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
-
-/* PCI MAP register bits (PCI -> Local bus) */
-#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
-#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
-#define V3_PCI_MAP_M_REG_EN (1 << 1)
-#define V3_PCI_MAP_M_ENABLE (1 << 0)
-
-/* 9 => 512M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
-
-/* A => 1024M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
-
-/* LB_BASE register bits (Local bus -> PCI) */
-#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
-#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
-#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
-#define V3_LB_BASE_M_PREFETCH (1 << 3)
-#define V3_LB_BASE_M_ENABLE (1 << 0)
-
-/* PCI COMMAND REGISTER bits */
-#define V3_COMMAND_M_FBB_EN (1 << 9)
-#define V3_COMMAND_M_SERR_EN (1 << 8)
-#define V3_COMMAND_M_PAR_EN (1 << 6)
-#define V3_COMMAND_M_MASTER_EN (1 << 2)
-#define V3_COMMAND_M_MEM_EN (1 << 1)
-#define V3_COMMAND_M_IO_EN (1 << 0)
-
-#define INTEGRATOR_SC_BASE 0x11000000
-#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
-#define INTEGRATOR_SC_PCIENABLE \
- (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#endif /* CONFIG_PCI */
/*-----------------------------------------------------------------------
* There are various dependencies on the core module (CM) fitted
* Users should refer to their CM user guide