diff options
| author | Pascal Linder <pascal.linder@edu.hefr.ch> | 2019-07-09 09:28:22 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2019-08-12 09:12:38 +0200 |
| commit | e5c9e830b8daba4ad511d457fdf76944605e0376 (patch) | |
| tree | 1106096964aeb6f7cd7ab78c4191f5b06a5682d2 /include/configs/km/km_arm.h | |
| parent | 432579c4d1ee89da7322ff11f0424360df2b0d95 (diff) | |
| download | u-boot-e5c9e830b8daba4ad511d457fdf76944605e0376.tar.gz | |
km: clean up header files for KM Kirkwood boards
Remove unused preprocessor definitions and comments of already eliminated
code.
The Ethernet driver configuration is already declared in
arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous.
Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include/configs/km/km_arm.h')
| -rw-r--r-- | include/configs/km/km_arm.h | 22 |
1 files changed, 0 insertions, 22 deletions
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 22bd744660..8b0b665af5 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -32,8 +32,6 @@ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" -/* SPI NOR Flash default params, used by sf commands */ - /* Reserve 4 MB for malloc */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -72,17 +70,10 @@ #define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE /* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_INITRD_TAG /* enable INITRD tag */ #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ @@ -92,22 +83,16 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define BOOTFLASH_START 0x0 - /* * Other required minimal configurations */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ /* * Ethernet Driver configuration */ -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ /* * I2C related stuff @@ -221,13 +206,8 @@ int get_scl(void); "arch=arm\0" \ "" -#if !defined(CONFIG_MTD_NOR_FLASH) -#undef CONFIG_JFFS2_CMDLINE -#endif - /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Do early setups now in board_init_f() */ /* address for the bootcount (taken from end of RAM) */ #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) @@ -237,6 +217,4 @@ int get_scl(void); #define CONFIG_POST_SKIP_ENV_FLAGS #define CONFIG_POST_EXTERNAL_WORD_FUNCS -/* we do the whole PCIe FPGA config stuff here */ - #endif /* _CONFIG_KM_ARM_H */ |